Loading...
HomeMy WebLinkAbout22-131 Resolution No. 22-131 RESOLUTION AUTHORIZING EXECUTION OF A PURCHASE AGREEMENT WITH FIRE SERVICE, INC. FOR THE PURCHASE OF AN EMERGENCY ONE FIRE ENGINE BE IT RESOLVED BY THE CITY COUNCIL OF THE CITY OF ELGIN, ILLINOIS, that pursuant to Elgin Municipal Code Section 5.02.020B(9)the City Council hereby finds that an exception to the requirements of the procurement ordinance is necessary and in the best interest of the city; and BE IT FURTHER RESOLVED BY THE CITY COUNCIL OF THE CITY OF ELGIN, ILLINOIS, that Richard G. Kozal, City Manager, and Kimberly A. Dewis, City Clerk, be and are hereby authorized and directed to execute a Purchase Agreement on behalf of the City of Elgin with Fire Service, Inc., for the purchase of an Emergency One Fire Engine, a copy of which is attached hereto and made a part hereof by reference. s/David J. Kaptain David J. Kaptain, Mayor Presented: July 27, 2022 Adopted: July 27, 2022 Omnibus Vote: Yeas: 8 Nays: 0 Attest: s/Kimberly Dewis Kimberly Dewis, City Clerk PURCHASE AGREEMENT This Agreement is hereby made and entered into this 27 day of July , 2022, by and between the City of Elgin, Illinois, a municipal corporation (herein referred to as "City") and Fire Service, Inc., an Indiana corporation, (herein referred to as "Fire" or"Seller"). NOW THEREFORE, for and in consideration of the mutual promises and covenants contained herein, the sufficiency of which is hereby mutually acknowledged, the parties hereto hereby agree as follows: 1. PURCHASE. City shall purchase, and Fire shall sell the goods described by Attachment A attached hereto and made a part hereof; and as described in the Fire Service, Inc./E-ONE-H- GAC Bid/Contract Number FS12-19 proposal/specifications dated May 27, 2022 attached hereto and made a part hereof as Attachment B. 2. TERMS. This agreement shall be subject to the terms and conditions contained herein and as provided by Attachments A and B. 3. CONFLICT. In the event of any conflict between any of the terms and provisions of this purchase agreement and Attachment A or B hereto, the terms and provisions of this purchase agreement shall supersede and control. In the event of any conflict between Attachments A and B, Attachment A shall supersede and control. 4. LAW/VENUE. This agreement is subject to and governed by the laws of the State of Illinois. Venue for the resolution of any disputes or the enforcement of any rights arising out of or in connection with this agreement shall be the Circuit Court of Kane County,Illinois,without jury. SEC hereby irrevocably consents to the jurisdiction of the Circuit Court of Kane County, Illinois for the enforcement of any rights, the resolution of any disputes and/or for the purposes of any lawsuit brought pursuant to this agreement or the subject matter hereof,and Fire agrees that service by first class U.S. mail to Fire Service, Inc., 9545 North Industrial Drive, Saint John, Indiana 46373 shall constitute effective service. 5. NO MODIFICATION. There shall be no modification of this agreement, except in writing and executed with the same formalities as the original. 6. MERGER. This agreement embodies the whole agreement of the parties. There are no promises, terms, conditions, or obligations other than those contained herein, and this agreement shall supersede all previous communications,representations,or agreements,either verbal,written or implied between the parties hereto. 7. INTEREST. Fire hereby waives any and all claims or rights to interest on money claimed to be due pursuant to this agreement,and waives any and all such rights to interest to which it may otherwise be entitled, pursuant to law, including, but not limited to, pursuant to the Local Government Prompt Payment Act(50 ILCS 50511, et seq.)as amended or the Illinois Interest Act (815 ILCS 205/1 et seq.)as amended.The provisions of this paragraph shall survive any expiration, completion, and/or termination of this agreement. 8. SEVERABILITY. The terms of this agreement shall be severable. In the event any of the terms or the provisions of this agreement are deemed to be void or otherwise unenforceable for any reason,the remainder of this agreement shall remain in full force and effect. 9. COMPLIANCE WITH LAW. Notwithstanding any other provision of this agreement it is expressly agreed and understood that in connection with the performance of this agreement, Fire shall comply with all applicable, federal, state,city and other requirements of law, including, but not limited to, any applicable requirements regarding prevailing wages, minimum wage, workplace safety and legal status of employees. Without limiting the foregoing, Fire hereby certifies, represents, and warrants to City that all of Fire's employees and/or agents who will be providing products and/or services with respect to this agreement shall be legally authorized to work in the United States. Fire shall also at its expense secure all permits and licenses, pay all charges and fees, and give all notices necessary and incident to the due and lawful prosecution of the work, and/or the products and/or services to be provided for in this agreement. City shall have the right to audit any records in the possession or control of Fire to determine Fire's compliance with the provisions of this section. In the event City proceeds with such an audit, Fire shall make available to City, Fire's relevant records at no cost to City. City shall pay any and all costs associated with any such audit. 10. PAYMENT. City shall pay Seven Hundred Fourteen Thousand Three Hundred Fifty-one and 00/100 Dollars($714,351.00)pursuant to Attachment A within thirty(30)days of delivery or City's receipt of invoice whichever is later.The aforementioned total sum is inclusive of all freight, shipping and applicable taxes,which shall be at Fire's sole expense. 11. TERMS OF PAYMENT. F.O.B. St. John, IN. Zero down payment, full payment via wire transfer or municipal check. The purchase price payment reflects US dollars and does not include any authorized change orders which, if applicable, shall be paid at time of final inspection and signed acceptance. The pumper and equipment covered by this contract shall remain the property of Fire and shall not be placed in service until the full contract price has been paid. 12. DELIVERY. Delivery is as provided by Attachments A and B hereto. The apparatus shall be ready for delivery within approximately 20 months, after the receipt of signed (approved by both the City and Fire Service) pre-construction documents and drawings. Fire Service shall not be held liable for penalties and/or delays due to strikes,failures to obtain materials,fires,accidents, force majeure,pandemics,civil wars, riots, delays in the manufacturing due to long lead times on materials, delays in manufacturing due to labor shortages, floods, explosions, hurricanes or any other causes beyond Fire Service's control. In order to establish a stable design, procurement, and build schedule, a City change order cutoff date of two(2)weeks, or if a pre-build is required eight(8)weeks, from the date of the execution of the contract will be enforced. Changes in major components,configuration,or other items that 2 may change the major components or configuration(e.g., engine,transmission, axles, water tank, body, fire pump)will not be allowed after the contract execution date. If inability to obtain exclusive or brand name materials causes completion or delivery problems, Fire Service shall advise the City of said problems. Fire Service reserves to examine alternative sources of said material. Material substitutions shall be mutually agreed upon by the City and Fire Service. No substitutions shall be made without the execution of a written change order by the City. 13. LIMITATION OF DAMAGES. Notwithstanding anything to the contrary herein, in no event shall City be liable for any monetary damages in excess of the purchase price contemplated by this agreement. In no event shall City be liable for any consequential, special, or punitive damages resulting from loss of profit. 14. EXECUTION. This agreement may be executed in counterparts, each of which shall be an original and all of which shall constitute one and the same agreement. For the purposes of executing this agreement, any signed copy of this agreement transmitted by fax machine or e-mail shall be treated in all manners and respects as an original document. The signature of any party on a copy of this agreement transmitted by fax machine or e-mail shall be considered for these purposes as an original signature and shall have the same legal effect as an original signature. Any such faxed or e-mailed copy of this agreement shall be considered to have the same binding legal effect as an original document. At the request of either party any fax or e-mail copy of this agreement shall be re-executed by the parties in an original form. No party to this agreement shall raise the use of fax machine or e-mail as a defense to this agreement and shall forever waive such defense. 15. TRANSFER OF TITLE/RISK. Transfer of title, and risk of loss shall pass to City upon delivery of the goods. All transportation and delivery costs shall be at Fire's sole expense. 16. CHANGE ORDERS. Changes to the contract may be requested by either party hereto after the execution of this contract. Changes shall be reviewed for cost and schedule impact by both parties. Changes shall be sequentially numbered. The price of the apparatus shall be adjusted to take into account any Change Orders. Any and all Change Orders may extend the completion and delivery of the apparatus. 17. SPECIFICATIONS. Fire Service and City agree that all material and workmanship in and about this apparatus shall comply with the Fire Service, Inc./E-ONE/H-GAC Bid Contract Number FS 12-19 proposal dated May 27, 2022 incorporated herein by reference, and made a part hereof, and any authorized change orders. 18. WARRANTY. Shall be as proposed in the attached 2024 E-ONE Cyclone Custom Pumper specifications. 19. The unit shall be inspected and / or delivered within seven (7) days of notice that the unit had been completed. 3 20. CANCELLATION. This contract is subject to cancellation by City only upon payment to Fire of reasonable cancellation charges, which shall take into account expenses already incurred and commitments made by Fire. This contract, to be binding, must be signed by an officer of Fire Service, Inc. or a person authorized, in writing,by Fire Service, Inc. to do so. 21. TAG-ON/ADDITIONAL ORDERS. At its sole discretion,Fire may allow the terms of this contract to be extended to both City and similar agencies for the purchase of a similar unit(s) under similar terms for a period of three (3) years from the date of the execution of this contract. Should Fire choose to exercise this option, it shall be permitted to adjust the contract pricing for such similar units which may be purchased in the future to account for equitable price adjustments associated with the change in the cost of the materials used to produce the unit. Such adjustments will be based upon the Producer Price Index (PPI) for fire tracks and / or heavy transportation equipment or by itemizing price changes expected by Fire from the component vendors. If there are any changes between the unit(s)purchased via this contract and any subsequent orders, those changes shall be documented via properly signed and executed change orders, including any necessary price adjustments. If the purchasing agency is not the City, a separate contract will be required to complete the additional purchases. This contract, including its appendices, embodies the entire understanding between the parties relating to the subject matter contained herein and merges all prior discussions and agreements between them. No agent or representative of Fire has authority to make any representations, statements, warranties, or agreements not herein expressed and all modifications of amendments of this agreement, including any appendices, must be in writing signed by an authorized representative of each of the parties hereto. No surety of any performance bond given by Fire to City in connection with this Agreement shall be liable for any obligation of Fire arising under the standard warranty. IN WITNESS WHEREOF,City and Fire have caused this contract to be executed by their duly authorized representatives this 2_day of July ,2022. FIRE SERVICE, INC. CI LGIN Jim Castellano Print Name Richard G. Kozal,City Manager gnature Vice President of Sales Attest-.Y'et/.'��A6�� City Gierk Title C:\Users\bailey_k\Box\Legal Dept\Agreement\Purchase Agreement-Fire Service Inc-Fire Engine-7-6-22.docx 4 ATTACHMENT A Apparatus Sales & Service 9545 Industrial Drive North St. John, Indiana 46373 (630) 918-8514 Email: greg(a)fireserviceinc.com (800) 578-4281 Website: www.fireserviceinc.com Fax # (219) 365-8572 May 27, 2022 Chief Robb Cagann City of Elgin Fire Department 550 Summit Street Elgin, IL 60120 Thank you for your continued interest in E-ONE Emergency Response Apparatus At your request, the following confidential pricing information is being provided for the purchase of one (1) E-ONE Custom Pumper (Quote 109781) utilizing the Houston- Galveston Area Council (H-GACBUY) FS12-19 Pricing Schedule. This pumper shall be similar to the E-ONE Typhoon Pumper that was delivered in early 2018. (Shop Order 141340, Engine 2) 2024 E-ONE Cyclone Custom Pumper $ 712,351.00 In addition to the above proposal price a H-GAC Processing Fee shall be added. That fee shall be: H-GAC Processing Fee $ 2,000.00 Costs for delivery, dealership vehicle preparation, installation of a Vanner Invertor, a Pre-Build Factory Trip to E-ONE, and a Final Inspection Factory Trip to E-ONE are included in this proposal. The above pricing information does not include any loose equipment for the apparatus. Ground ladders are included in this proposal price. Delivery will be F.O.B. Elgin, IL. and will be made after receipt of a City of Elgin Purchase Order, proper execution of a Fire Service, Inc. Purchase Agreement by both parties, and approximately 19 months after approval drawings are signed following the prebuild conference. Terms of payment are cash upon delivery unless otherwise stated. If you have any questions or if I may be of further assistance, please don't hesitate to contact me at 630-918-8514. 1 thank you in advance for your consideration and look forward to working with you on your upcoming apparatus purchase. Sincerely, Gregory R. Hansen Apparatus Sales Representative ATTACHMENT A TABLEOF CONTENTS..........................................................................................................................i Intentof Specifications.......................................................................................................................... 1 ISOCompliance...................................................................................................................................... 1 NFPACompliance.................................................................................................................................1 EquipmentCapacity...............................................................................................................................2 BUMPER......................................................................................................................................................2 Bumper.....................................................................................................................................................2 BumperExtension..................................................................................................................................2 BumperGravel Shield............................................................................................................................2 BumperTray............................................................................................................................................2 Bumper Tray Securing Strap.................................................................................................................2 FRAMEASSEMBLY.................................................................................................................................2 Rear Underbody Support Frame..........................................................................................................2 FrameAssembly......................................................................................................................................3 Galvanized Frame Components...........................................................................................................4 CoatedFasteners.....................................................................................................................................4 AXLEOPTIONS.......................................................................................................................................4 FrontAxle................................................................................................................................................4 FrontShock Absorbers..........................................................................................................................5 FrontAxle Oil Seals...............................................................................................................................5 RearAxle..................................................................................................................................................5 SUSPENSIONS..........................................................................................................................................5 RearSuspension......................................................................................................................................5 WHEELOPTIONS...................................................................................................................................5 FrontWheels...........................................................................................................................................5 FrontWheel Trim Package....................................................................................................................5 RearWheels.............................................................................................................................................6 RearWheel Trim Package......................................................................................................................6 ValveStem Extensions..........................................................................................................................6 TIREOPTIONS.........................................................................................................................................6 FrontTires...............................................................................................................................................6 RearTires.................................................................................................................................................6 TirePressure Indicators.........................................................................................................................7 BRAKESYSTEMS.....................................................................................................................................7 FrontBrakes............................................................................................................................................7 i RearBrakes..............................................................................................................................................7 BrakeSystem...........................................................................................................................................7 ParkBrake Release..................................................................................................................................8 Emergency Release for Spring Brake...................................................................................................9 BrakeSystem Fittings.............................................................................................................................9 AIRSYSTEM OPTIONS.........................................................................................................................9 AirDryer..................................................................................................................................................9 AirInlet....................................................................................................................................................9 IsolatedAir Reservoir.............................................................................................................................9 HeatedMoisture Ejectors......................................................................................................................9 AirLines...................................................................................................................................................9 AirHorns.................................................................................................................................................9 Push-Button Switch..............................................................................................................................10 Stainless Steel Mounting Straps..........................................................................................................10 ENGINE&TRANSMISSION.............................................................................................................10 Engine/Transmission Package...........................................................................................................10 Engine................................................................................................................................................10 Transmission.....................................................................................................................................11 TransmissionSelector..........................................................................................................................12 TransmissionFluid...............................................................................................................................12 VehicleSpeed........................................................................................................................................12 Automatic Shift to Neutral.............................................................................................................12 SECONDARYBRAKING....................................................................................................................12 JacobsEngine Brake.............................................................................................................................12 TransmissionProgramming................................................................................................................13 COOLINGPACKAGE..........................................................................................................................13 EngineCooling Package......................................................................................................................13 Radiator..............................................................................................................................................13 SiliconeHoses...................................................................................................................................13 Coolant...............................................................................................................................................13 CoolantRecovery.............................................................................................................................13 ChargeAir Cooler System...............................................................................................................13 ChargeAir Cooler Hoses................................................................................................................14 Fan/Shroud.......................................................................................................................................14 TransmissionCooler........................................................................................................................14 FUELSYSTEMS......................................................................................................................................14 FuelRe-Prime........................................................................................................................................14 ll FuelLine.................................................................................................................................................14 Fuel/Water Separator...........................................................................................................................14 FuelSystem............................................................................................................................................15 ALTERNATOR........................................................................................................................................15 420 Amp Alternator..............................................................................................................................15 BATTERIES.............................................................................................................................................. 15 BatterySystem....................................................................................................................................... 15 CHASSISOPTIONS...............................................................................................................................16 EngineFan Clutch................................................................................................................................16 Drivelines................................................................................................................................................ 16 RearTow Eyes......................................................................................................................................16 RearTrailer Hitch................................................................................................................................. 17 FrontTow Hooks.................................................................................................................................17 DEFTank..............................................................................................................................................17 PowerSteering Cooler.........................................................................................................................17 CAB.............................................................................................................................................................17 CycloneCab...........................................................................................................................................17 CabExterior..........................................................................................................................................19 WindshieldWipers................................................................................................................................19 Cab Mounts and Cab Tilt System.......................................................................................................19 CabInterior............................................................................................................................................20 CabDoors..............................................................................................................................................21 Cab Instruments and Controls............................................................................................................22 ElectricalSystem...................................................................................................................................23 DaytimeRunning Lights......................................................................................................................23 FastIdle System....................................................................................................................................23 Cab Crashworthiness Requirement....................................................................................................23 SeatMounting Strength.......................................................................................................................24 SeatBelt Anchor Strength...................................................................................................................24 ISOCompliance....................................................................................................................................25 CABROOF TYPE...................................................................................................................................25 CabRoof................................................................................................................................................25 CABDOOR OPTIONS..........................................................................................................................25 CabDoor Locks....................................................................................................................................25 CabDoor Panels...................................................................................................................................25 CabDoor Locks....................................................................................................................................25 Cab Door Reflective Material.............................................................................................................25 iii WarningLights......................................................................................................................................26 Cab Compartment Door Trim............................................................................................................26 CabFront Door Windows..................................................................................................................26 CabRear Door Windows....................................................................................................................26 CabDoor Style......................................................................................................................................26 DoorHandles........................................................................................................................................26 MIRRORS..................................................................................................................................................26 CabMirrors............................................................................................................................................26 MISCELLANEOUS EXTERIOR CAB OPTIONS..........................................................................27 FrontMud Flaps...................................................................................................................................27 RearCab Wall Construction................................................................................................................27 KnurledHand Rail Extrusion.............................................................................................................27 CabWheel Well.....................................................................................................................................27 ReceptacleMounting Plate..................................................................................................................27 HVAC.........................................................................................................................................................27 AirConditioning...................................................................................................................................27 HVACControl Location.....................................................................................................................28 SEATS.........................................................................................................................................................28 CabSeats................................................................................................................................................28 SeatCover Material...............................................................................................................................28 SeatFabric Color..................................................................................................................................28 DriverSeat.............................................................................................................................................29 OfficerSeat............................................................................................................................................29 DynamicSCBA Recess........................................................................................................................29 RearWall Seats......................................................................................................................................29 SeatBelts................................................................................................................................................30 SeatBelt Extenders...............................................................................................................................30 SeatingCapacity Tag.............................................................................................................................30 MEDICALCABINETS..........................................................................................................................30 Medical Storage Cabinet Finish..........................................................................................................30 MedicalStorage Cabinets.....................................................................................................................30 CoverPlates...........................................................................................................................................31 MAPBOX..................................................................................................................................................31 MapBox.................................................................................................................................................31 MapBox Finish.....................................................................................................................................31 MISCELLANEOUS INTERIOR CAB OPTIONS...........................................................................32 SunVisors..............................................................................................................................................32 iv EngineCover.........................................................................................................................................32 RearEngine Cover................................................................................................................................32 RearEngine Cover Trim......................................................................................................................32 SevereDuty Interior Walls..................................................................................................................32 ScuffPlate..............................................................................................................................................32 CabDash-Severe Duty......................................................................................................................32 OverheadConsole................................................................................................................................33 CabInsulation Package........................................................................................................................33 CABELECTRICAL OPTIONS............................................................................................................33 Cab Interior Push-Button Style..........................................................................................................33 CabDome Lights..................................................................................................................................33 HornButton Switch.............................................................................................................................34 CabAmp Gauge....................................................................................................................................34 English Dominant Gauge Cluster......................................................................................................34 Speedometerfor Officer......................................................................................................................34 Headlights..............................................................................................................................................34 LEDCab Headlights............................................................................................................................34 Battery Charger with Remote..............................................................................................................35 BatteryCharger Location.....................................................................................................................35 Auto-Eject Battery Charger Receptacle.............................................................................................35 BatteryCharger Wiring........................................................................................................................35 DPF Regeneration Override...............................................................................................................35 CabDoor Step Area Lighting.............................................................................................................35 CabTurn Signals...................................................................................................................................36 BODY COMPARTMENT-LEFT SIDE...........................................................................................36 DriverSide Assembly...........................................................................................................................36 DriverSide Compartments.............................................................................................................36 BODY COMPARTMENT-RIGHT SIDE........................................................................................37 OfficerSide Assembly..........................................................................................................................37 OfficerSide Compartments............................................................................................................37 BODYCOMPARTMENT-REAR......................................................................................................38 RearBody Compartment.....................................................................................................................38 RearBody Compartment................................................................................................................38 Tailboard................................................................................................................................................38 Tailboard Ste 38 RearAccess Handrails.....................................................................................................................38 DOORS......................................................................................................................................................39 v Double Compartment Door...............................................................................................................39 Painted Roll Up Compartment Doors...............................................................................................39 Strapfor Roll-Up Doors......................................................................................................................40 DoorD-Ring Latch..............................................................................................................................40 SHELVES..................................................................................................................................................40 AdjustableShelves................................................................................................................................40 TRAYS /TOOLBOARDS.....................................................................................................................41 Roll-Out Trays.......................................................................................................................................41 Runningboard Suction Trays...............................................................................................................41 Toolboard...............................................................................................................................................41 COVERS....................................................................................................................................................42 HoseBed Cover....................................................................................................................................42 CrosslayCover....................................:..................................................................................................42 CrosslayCover Hinge...........................................................................................................................42 CrosslayCover-Sides..........................................................................................................................42 Running Board Tray Securing Straps.................................................................................................42 HoldOpen.............................................................................................................................................43 PUMPMODULE.....................................................................................................................................43 PumpModule Width............................................................................................................................43 PumpModule Height...........................................................................................................................43 PumpModule........................................................................................................................................43 Crosslay Triple Preconnect Storage...............................................................................................43 DunagePan.......................................................................................................................................43 Pump Module Running Boards......................................................................................................43 PUMPPANELS........................................................................................................................................44 SideMount Pump Panels.....................................................................................................................44 PumpAccess Door...............................................................................................................................44 HingedGauge Panel.............................................................................................................................44 MISCELLANEOUS PUMP PANEL OPTIONS...............................................................................44 PumpPanel Tags..................................................................................................................................44 Mechanically Fastened Tags................................................................................................................44 OKTo Pump Light..............................................................................................................................45 AirOutlet...............................................................................................................................................45 PUMPMODULE OPTIONS................................................................................................................45 PumpCompartment Heaters..............................................................................................................45 Pump Module Crosslay Divider Notch.............................................................................................45 RollerAssemblies..................................................................................................................................45 vi FlexJoint................................................................................................................................................45 AirHorn Switch....................................................................................................................................45 Crosslay Divider-Adjustable.............................................................................................................46 WATERTANK........................................................................................................................................46 530 Gallon Tank...................................................................................................................................46 FillTower Location..............................................................................................................................47 TANKPLUMBING................................................................................................................................47 TankFill.................................................................................................................................................47 TankTo Pump......................................................................................................................................47 LADDERSTORAGE /RACKS..........................................................................................................48 HardSuction Hose Rack.....................................................................................................................48 LadderBrand.........................................................................................................................................48 Ladders...................................................................................................................................................48 PikePole.................................................................................................................................................48 Hose Bed Officer Side Tunnel Storage.............................................................................................48 HANDRAILS / STEPS...........................................................................................................................48 Hose Bed Folding Steps........................................... Hose Bed Folding Steps........................................... IntermediateRear Step.........................................................................................................................49 FoldingSteps.........................................................................................................................................49 MISCELLANEOUS BODY OPTIONS..............................................................................................50 MudFlaps..............................................................................................................................................50 BodyMainframe....................................................................................................................................50 BodyMounting System...................................................................................................................50 Water Tank Mounting System........................................................................................................50 HosebedSide Assembly..................................................................................................................50 HoseBed................................................................................................................................................51 HoseBed Dividers................................................................................................................................51 Hose Bed Divider Hand Holds ..........................................................................................................51 DividerSupport................................................................................. StoragePan............................................................................................................................................51 FuelFill...................................................................................................................................................52 StainlessSteel Trim...............................................................................................................................52 FillTower Location..............................................................................................................................52 RubRail..................................................................................................................................................52 AngledTailboard Corners...................................................................................................................52 CompartmentPartitions......................................................................................................................52 vii BodyWheel Well...................................................................................................................................52 Additional Hosebed Horizontal Storage...........................................................................................53 SCBA BOTTLE STORAGE..................................................................................................................53 SCBABottle Storage............................................................................................................................53 SCBAStraps..........................................................................................................................................53 PUMP..........................................................................................................................................................54 PumpRating..........................................................................................................................................54 PumpCertification................................................................................................................................54 FirePump System.................................................................................................................................54 DischargeManifold..........................................................................................................................55 PumpShift.........................................................................................................................................55 TestPorts...........................................................................................................................................56 PUMPOPTIONS.....................................................................................................................................56 Electronic Speed Counter....................................................................................................................56 Waterous Overheat Protection Manager...........................................................................................56 Steamers.................................................................................................................................................56 WaterousPump Anodes......................................................................................................................56 ManualPump Shift Override..............................................................................................................56 MechanicalPump Seal..........................................................................................................................56 MasterDrain Valve...............................................................................................................................57 PumpCooler..........................................................................................................................................57 PrimingSystem......................................................................................................................................57 INTAKES...................................................................................................................................................57 2.5"Left Side Intake.............................................................................................................................57 2.5"Right Side Intake..........................................................................................................................58 FrontIntake...........................................................................................................................................58 ElectricActuated Valve........................................................................................................................58 INTAKEOPTIONS................................................................................................................................59 IntakeRelief Valve................................................................................................................................59 FrontIntake Swivel...............................................................................................................................59 DISCHARGES AND PRECONNECTS.............................................................................................60 1.5"Crosslays........................................................................................................................................60 2.5"Crosslay..........................................................................................................................................60 2.5"Left Panel Discharges..................................................................................................................61 2.5" Right Panel Discharge..................................................................................................................61 2.5"Left Rear Discharge.....................................................................................................................62 RightSide LDH Discharge..................................................................................................... viii RearLDH Discharge............................................................................................................................63 DeckGun Discharge............................................................................................................................63 DeckGun Location..............................................................................................................................64 DISCHARGEOPTIONS.......................................................................................................................64 Extend-A-Gun......................................................................................................................................64 CustomerProvided Monitor...............................................................................................................64 ICPush/Pull Control...........................................................................................................................64 BleederDrain Valves............................................................................................................................64 Discharge/Intake Bezels......................................................................................................................64 PRESSUREGOVERNOR.....................................................................................................................65 Pump Pressure Governor....................................................................................................................65 GAUGES...................................................................................................................................................65 Hourmeter..............................................................................................................................................65 FuelGauge.............................................................................................................................................65 WaterLevel Tank Gauge.....................................................................................................................65 DischargeGauges.................................................................................................................................66 MasterPressure Gauges.......................................................................................................................66 ELECTRICALSYSTEMS......................................................................................................................66 Multiplex Electrical System.................................................................................................................66 ElectricalSystem...............................................................................................................................66 MultiplexSystem..............................................................................................................................67 Wiring.................................................................................................................................................67 WiringProtection.............................................................................................................................68 WiringConnectors...........................................................................................................................68 NFPA Required Testing of Electrical System..............................................................................68 NFPA Required Documentation...................................................................................................69 VehicleData Recorder.........................................................................................................................69 Occupant Detection System...........................................................................................................70 MultiplexDisplay..................................................................................................................................70 Electrical Connection Protection.......................................................................................................70 SmartTruck Technology.....................................................................................................................71 UserInterface....................................................................................................................................71 CumminsIntegration.......................................................................................................................71 HaasAlert..........................................................................................................................................71 Hardware...........................................................................................................................................72 DataPlan...........................................................................................................................................72 LIGHTBARS............................................................................................................................................72 ix LightBar.................................................................................................................................................72 LightBar Mounts..................................................................................................................................72 FrontLight Bar Color..........................................................................................................................72 LightBar Layout...................................................................................................................................72 LightBar LED Filters..........................................................................................................................73 WARNING LIGHT PACKAGES........................................................................................................73 Lower-Level Warning Light Package.................................................................................................73 WARNINGLIGHTS..............................................................................................................................73 PreemptionEmitter..............................................................................................................................73 UpperRear Warning Lights ................................................................................................................73 WarningLights......................................................................................................................................74 Hazard (Door Ajar) Light....................................................................................................................74 DIRECTIONALLIGHT BAR..............................................................................................................74 Directional Traffic Warning Light......................................................................................................74 Directional Light Bar Control Location............................................................................................74 SIRENS.......................................................................................................................................................74 ElectronicSiren.....................................................................................................................................74 Electronic Siren Control Location.....................................................................................................74 EQ2BElectronic Siren........................................................................................................................75 e-Q2B Siren Control Location............................................................................................................75 Push-Button Switch..............................................................................................................................75 SPEAKER..................................................................................................................................................75 SirenSpeaker.........................................................................................................................................75 DOTLIGHTING....................................................................................................................................75 LicensePlate Light................................................................................................................................75 LEDMarker Lights..............................................................................................................................75 TailLights..............................................................................................................................................76 LIGHTS -COMPARTMENT,STEP&GROUND.........................................................................76 MedicalCabinet Lights.........................................................................................................................76 CompartmentLight Package...............................................................................................................76 GroundLights.......................................................................................................................................77 LIGHTS -DECK AND SCENE..........................................................................................................77 Deck/Scene Light Wired to Back-Up Lights...................................................................................77 CabScene Light Switching..................................................................................................................77 HoseBed Lights....................................................................................................................................77 SceneLights...........................................................................................................................................78 LEDCrosslay Lights............................................................................................................................78 1 LIGHTS-NON-WARNING................................................................................................................78 LightWiring...........................................................................................................................................78 PumpPanel Light Package..................................................................................................................78 PumpPanel Light.................................................................................................................................78 PumpCompartment Light..................................................................................................................79 EngineCompartment Light................................................................................................................79 CONTROLS / SWITCHES...................................................................................................................79 DoorAjar Alarm...................................................................................................................................79 FootSwitch............................................................................................................................................79 FootSwitches........................................................................................................................................79 AdditionalSwitch..................................................................................................................................79 ThreeWay Switching............................................................................................................................79 ProgrammingInstructions...................................................................................................................80 CAMERA...................................................................................................................................................80 CameraBack-Up...................................................................................................................................80 MISCELLANEOUS ELECTRICAL....................................................................................................80 TrailerHitch Pre-Wire Harness..........................................................................................................80 TrailerWiring Connector.....................................................................................................................80 Back-Up Alarm......................................................................................................................................80 Additional Wiring Instructions...........................................................................................................81 LIGHTS-AREA......................................................................................................................................81 CabBrow Light.....................................................................................................................................81 12-Volt LED Flood Lights..................................................................................................................81 RECEPTACLE.........................................................................................................................................81 Receptacle..............................................................................................................................................81 MISCELLANEOUS ELECTRICAL....................................................................................................82 InverterPrewire....................................................................................................................................82 ELBOWS....................................................................................................................................................82 ChromeElbows....................................................................................................................................82 ADAPTERS...............................................................................................................................................82 StorzAdapters.......................................................................................................................................82 GROUND LADDERS............................................................................................................................82 Alco-Lite Roof Ladder.........................................................................................................................82 Alco-Lite Extension Ladder................................................................................................................82 Alco-Lite Attic Ladder.........................................................................................................................82 MISCELLANEOUS LOOSE EQUIPMENT.....................................................................................83 WheelChocks........................................................................................................................................83 Xi DOTRequired Drive Away Kit.........................................................................................................83 EXTERIORPAINT................................................................................................................................83 PaintCustom Cab.................................................................................................................................83 Paint Cab Two-Tone Color............................................................. 84 .................................................... PaintBreak with Dip to Grille............................................................................................................84 PaintBody..............................................................................................................................................84 PaintRear Body.....................................................................................................................................85 Painted Pump/Pre-Connect Modules...............................................................................................85 PaintSpray Out.....................................................................................................................................85 Undercoating.........................................................................................................................................85 Compartment Opening Trim..............................................................................................................85 CompartmentOpening Trim..............................................................................................................85 INTERIORPAINT.................................................................................................................................85 CabInterior Paint.................................................................................................................................85 PROTECTIVECOATINGS.................................................................................................................86 LINE-X Package...................................................................................................................................86 LINE-X package for Pumper Body...................................................................................................86 LINE-X package for Pumper Body Stepping Surfaces ..................................................................86 LINE-X Package for Custom Cab Steps..........................................................................................86 ScorpionBumper Top Perimeter.......................................................................................................87 ScorpionRear Cab Door Cabinet......................................................................................................87 STRIPING.................................................................................................................................................87 Striping...................................................................................................................................................87 Reflective Stripe in Rubrail..................................................................................................................87 ScotchliteCab Stripe............................................................................................................................87 Front Bumper Reflective Striping......................................................................................................87 RearBody Reflective Striping.............................................................................................................87 Lettering.................................................................................................................................................87 Designated Standing/Walking Area Indication.............................................................................87 WARRANTY/ STANDARD &EXTENDED.................................................................................88 General1 Year Warranty.....................................................................................................................88 Body Structural(Aluminum) Warranty..............................................................................................88 Plumbingand Piping Warranty...........................................................................................................88 Meritor Front Axle Warranty..............................................................................................................88 MeritorRear Axle Warranty................................................................................................................88 CustomChassis Warranty....................................................................................................................88 Emissions Systems Warranty...............................................................................I..............................89 Xll ElectricalWarranty...............................................................................................................................89 Frame Assembly Structural Warranty................................................................................................89 CabStructural Warranty.......................................................................................................................89 Paintand Finish Warranty...................................................................................................................89 Frame Rail Corrosion Warranty..........................................................................................................89 Frame Components Corrosion Warranty.........................................................................................89 SUPPORT,DELIVERY,INSPECTIONS AND MANUALS........................................................90 PumpPanel Approval Drawing..........................................................................................................90 ApprovalDrawings...............................................................................................................................90 Approval Drawings -Dash Panel Layout.........................................................................................90 ElectronicManuals...............................................................................................................................90 FireApparatus Safety Guide.........................................:.....................................................................91 FactoryTrips.........................................................................................................................................91 Delivery..................................................................................................................................................91 FIRE SERVICE,INC. PROVIDED ITEMS......................................................................................91 FireExtinguisher Storage....................................................................................................................91 CompartmentMatting..........................................................................................................................92 SigtronicsIntercom System.................................................................................................................92 Motorola Radio Installation—Radio A.............................................................................................92 Motorola Radio Installation—Radio B..............................................................................................92 MotorolaRadio Speakers.....................................................................................................................92 RadioAntenna-A................................................................................................................................93 RadioAntenna—B...............................................................................................................................93 VannerInverter.....................................................................................................................................93 ExhaustPipe Modification..................................................................................................................93 ELGIN FIRE DEPARTMENT SUPPLIED EQUIPMENT..........................................................93 HardSuction Hose...............................................................................................................................93 FireBell..................................................................................................................................................94 IntercomHeadsets................................................................................................................................94 Sigtronics Radio Interface....................................................................................................................94 Motorola Radio Installation—Radio A.............................................................................................94 Motorola Radio Installation—Radio B..............................................................................................94 MotorolaRadio Speakers.....................................................................................................................94 xiii Confidential Proposal Specifications for the Elgin Fire Department Intent of Specifications It is the intent of these specifications to clearly describe the furnishing and delivery to the City of Elgin Fire Department,a complete apparatus equipped as specified.The primary objective of these specifications is to obtain the most acceptable apparatus for service in the Fire Department.These specifications cover specific requirements as to the type of construction and tests the apparatus must conform,together with certain details as to finish,material preferences,equipment and appliances with which the successful bidder must conform. The design of the apparatus must embody the latest approved automotive design practices.The workmanship must be of the highest quality in its respective field. Special consideration shall be given to service access to areas needing periodic maintenance,ease of operation,and symmetrical proportions. Construction must be heavy-duty and ample safety factors must be provided to carry loads as specified.The construction method employed will be in such a manner as to allow ready removal of any component for service or repair. The apparatus shall conform to the National Fire Protection Association Standard for Automotive Fire Apparatus,number 1901,in its most recent edition,unless otherwise specified in this document. Only the specified firefighting support equipment listed in these specifications shall be provided. The apparatus shall further conform to all Federal Motor Vehicle Safety Standards. ISO Compliance E-ONE as the manufacturer shall operate a Quality Management System meeting the requirements of ISO 9001:2000. The International Organization for Standardization (ISO) is a recognized world leader in establishing and maintaining stringent manufacturing standards and values. The manufacturer's certificate of compliance affirms that these principles form the basis for a quality system that unswervingly controls design,manufacture,installation,and service. The manufacturer's quality systems shall consist of,but not be limited to,all written quality procedures (aka QOP) and other procedures referenced within the pages of the manufacturer's Quality Manual,as well as all Work Instructions,Workmanship Standards,and Calibration Administration that directly or indirectly impacts products or processes. In addition,all apparatus assembly processes shall be documented for traceability and reference. The manufacturer shall also engage the services of a certified third party for testing purposes where required. By virtue of its ISO compliance the manufacturer shall provide an apparatus that is built to exacting standards,meets the customer's expectations,and satisfies the customer's requirements. NFPA Compliance The E-ONE supplied components of the apparatus shall be compliant with NFPA 1901,2016 edition. 1 Confidential Proposal Specifications for the Elgin Fire Department Equipment Capacity Equipment allowance on the apparatus shall be 2,000 lbs.This allowance is in addition to the weight of the hoses and ground ladders listed in these proposal specifications. BUMPER Bumper A heavy-duty 10" high formed type front bumper constructed of 1/4" (.250") steel shall be provided. The front corners of the bumper shall be provided with a 45-degree tapered to produce an 8.5"wide mounting surface and to reduce swing clearance. Additional support shall be provided from the frame rails for the outboard side areas on bumper extensions greater than 12in. The bumper shall be painted as specified. Bumper Extension The bumper extension shall be approximately 24" from the face of the cab. Bumper Gravel Shield The extended front bumper gravel shield shall be made of 3/16" (.375") aluminum tread plate material. Bumper Tray A hose tray constructed of 1/8" aluminum shall be recessed into the front bumper extension. The tray shall be located in the center of the bumper and be approximately 12" deep (11" to the top of the slats). One inch thick aluminum slats shall be included in the bottom of the hose tray to aid in the dissipation of water from the tray. Bumper Tray Securing Strap A heavy-duty black nylon strap with a stainless steel quick-release buckle shall be provided for center front bumper tray. The strap shall be attached to the inboard side of the tray and shall not reduce the overall tray capacity. FRAME ASSEMBLY Rear Underbody Support Frame The body shall be supported at the rear by a steel frame extension bolted to the chassis frame rails. 2 Confidential Proposal Specifications for the Elgin Fire Department The frame rails and frame extension shall be isolated from the aluminum body extrusions by 5/16" x 2" fiber reinforced rubber. The frame extension shall be built with (2) 2.5" sq.x.25 wall thickness x full width cross rails welded to (2) 2.5" sq. x .25 wall thickness side rails.The frame extension assembly will be welded to steel weldments,which are secured to the chassis frame with 5/8"grade 8 bolts.The frame extension shall have a hot-dipped galvanized zinc coating for increased corrosion resistance. The coating shall be done in compliance with the ASTM A123 Standard. The frame extension shall not interfere with N.F.P.A.minimum requirements for angle of departure. Frame Assembly The frame shall consist of two (2) C-channel frame rails with heavy-duty cross-members. Each frame rail shall have the following minimum specifications in order to minimize frame deflection under load and thereby improve vehicle ride and extend the life of the frame: Dimensions: 10-1/4" x 3-1/2" x 3/8" Material: 110,000-psi minimum yield strength,high strength,low alloy steel Section Modulus: 16.61 cu.in. Resistance to Bending Moment(RBM): 1,827,045 in.lbs. If larger rails are provided,the maximum height of each frame rail shall not exceed the 10-1/4" dimension by more than 1/2"in order to ensure the lowest possible body height for ease of access as well as the lowest possible vehicle center of gravity for maximum stability. There shall be a minimum of six (6) cross-members joining the two (2) frame rails in order to make the frame rigid and hold the rails/liners in alignment.The cross-members shall be a combination of a formed steel C-channel design along with heavy-duty steel fabricated designs as required for the exact chassis configuration.The cross-members shall be attached to the frame rails with not less than four(4) bolts at each end arranged in a bolt pattern to adequately distribute the cross-member load into the rail/liner and minimize stress concentrations. All frame fasteners shall be high-strength Grade 8, flanged-head threaded bolts and nuts for frame strength,durability,and ease of repair.The nuts shall be Stover locknuts to help prevent loosening. The frame fasteners shall be tightened to the proper torque at the time of assembly. The frame rails shall be hot-dip galvanized and powder coated for improved corrosion resistance. The galvanization shall be a minimum of 4 mils thick and done in accordance with ASTM A123. The powder coat shall be 6.5 mils thick(+/- 1.5 mils) and pass ASTM D3359 testing. The frame cross-members and frame mounted components (suspensions,axles,air tanks,battery boxes, fuel tank,etc.) shall be painted black. 3 Confidential Proposal Specifications for the Elgin Fire Department The custom chassis frame shall have a wheel alignment in order to achieve maximum vehicle road performance and to promote long tire life.The alignment shall conform to the manufacturer's internal specifications.All wheel lug nuts and axle U-bolt retainer nuts shall be tightened to the proper torque at the time of alignment. The wheel alignment documentation shall be made available at delivery upon request. Galvanized Frame Components The front chassis frame extensions,rear subframe,crossmembers and battery brackets shall be hot- dip galvanized for increased corrosion resistance. The coating shall be done in compliance with the ASTM A123 Standard. Coated Fasteners The custom chassis frame assembly shall be assembled using GEOMET 720 coated fasteners for corrosion resistance. AXLE OPTIONS Front Axle The vehicle shall utilize an Meritor MFS-20 front axle with a rated capacity of 18,700 lbs. It shall have"easy steer" knuckle pin bushings and 71" kingpin centers.The axle shall be of I-beam construction and utilize grease-lubricated wheel bearings. The vehicle shall have a nominal cramp angle of 45 degrees,plus two (+ 2) degrees to minus three (- 3) degrees including front suction applications. The axle shall feature a unitized hub,bearing and seal wheel end. The hubs shall be made from ductile iron and shall be designed for use with 10 hole hub-piloted wheels in order to improve wheel centering and extend tire life. Front springs shall be parabolic tapered,minimum 4"wide x 54"long(flat),minimum 3 leaf, progressive rate with a capacity of 20,000 lbs at the ground.The springs shall have Berlin style eyes and rubber bushings on each end with an additional standard wrap at the front eye.Tapered leaf springs provide a 20%ride improvement over standard straight spring systems. The vehicle shall be equipped with a Sheppard Model M-110 integral power steering gear used in conjunction with a power assist cylinder.The steering assembly shall be rated to statically steer a maximum front axle load of 18,700 lbs. Relief stops shall be provided to reduce system pressure upon full wheel cut.The system shall operate mechanically should the hydraulic system fail. In order to achieve maximum vehicle road performance and to promote long tire life,there shall,be a wheel alignment.The alignment shall conform to the manufacturer's internal specifications.All wheel lug nuts and axle U-bolt retainer nuts shall be tightened to the proper torque at the time of alignment.The wheel alignment documentation shall be made available at delivery. 4 Confidential Proposal Specifications for the Elgin Fire Department Front Shock Absorbers Koni Model 90 shock absorbers shall be provided for the front axle.The shocks shall be three way adjustable. The shocks shall be covered by the manufacturer's standard warranty. Front Axle Oil Seals The front axle shall have Stemco oil seals with sight glass to check the lubricant level of the axle spindles. Rear Axle The vehicle shall be equipped with a Meritor RS-24-160 single rear axle with single-reduction hypoid gearing and a manufacturer's rated capacity of 24,000 lbs.The axle shall be equipped with oil-lubricated wheel bearings with Meritor oil seals.The rear axle hubs shall be made from ductile iron and shall be designed for use with 10 hole hub-piloted wheels to improve wheel centering and extend tire life. SUSPENSIONS Rear Suspension The rear suspension shall be a pair of linear-rate leaf springs with auxiliary"helper"leaf springs. The variable-rate springs with auxiliary springs ensure that the vehicle rides and handles smoothly under both loaded and unloaded conditions. The suspension system shall have maintenance free rubber bushings at the forward end of the springs. The spring bushings shall have bar pin style mounting that allows for 4-wheel alignment. The suspension shall be rated for the maximum axle capacity. WHEEL OPTIONS Front Wheels The vehicle shall have two (2) polished (on outer wheel surfaces only) Alcoa aluminum disc wheels. They shall be forged from one-piece corrosion-resistant aluminum alloy and sized appropriately for the tires. Front Wheel Trim Package The front wheels shall have stainless steel lug nut covers.The front axle shall be covered with American made Real Wheels brand mirror finish,304L grade,non-corrosive stainless steel universal 5 Confidential Proposal Specifications for the Elgin Fire Department baby moons.All stainless steel baby moons shall carry a lifetime warranty plus a 2 year re-buffing policy.There shall be two (2) baby moons and twenty(20) lug nut covers. Rear Wheels The vehicle shall have four(4) polished (on outer wheel surfaces only)Alcoa aluminum disc wheels. They shall be forged from one-piece corrosion-resistant aluminum alloy and sized appropriately for the tires. Rear Wheel Trim Package The rear wheels shall have stainless steel lug nut covers. The rear axle shall be covered with American made Real Wheels brand mirror finish,304L grade,non-corrosive stainless steel,spring clip band mount high hats,DOT user friendly.All stainless steel high hats shall carry a lifetime warranty plus a 2 year re-buffing policy.There shall be two (2) high hats and twenty (20) lug nut covers. Valve Stem Extensions Each inside rear wheel on the rear axle shall have valve extensions. TIRE OPTIONS Front Tires The front tires shall be two (2) Michelin 385/65R22.5 tubeless type 18 PR radial tires with XZY3 Wide Base aggressive tread. The tires with wheels shall have the following weight capacity and speed rating: 18,740 lbs. @ 65 MPH (steel or aluminum wheels) The wheels and tires shall conform to the Tire and Rim Association requirements. Rear Tires The rear tires shall be Michelin 11R22.5 tubeless type radial tires with XDN2 all-weather tread. The tires with wheels shall have the following weight capacity: 24,000 lbs. (dual) @ 75 MPH The wheels and tires shall conform to the Tire and Rim Association requirements. 6 Confidential Proposal Specifications for the Elgin Fire Department Tire Pressure Indicators The apparatus shall be provided with Real Wheels AirGuard LED tire pressure indicating valve stem caps. When the tire is under inflated by 5-10 PSI,the LED indicator on the cap shall flash red. The indicator housings shall be shock resistant and constructed from polished stainless steel. The indicators shall be calibrated by attaching to valve stem of a tire at proper air pressure per load ratings and easily re-calibrated by simply removing and re-installing them during service. BRAKE SYSTEMS Front Brakes The front axle shall be equipped with Meritor DiscPlus EX225H 17-inch disc brakes. The brakes shall be covered by the manufacturer's standard warranty which is two years,unlimited mileage and parts only. Rear Brakes The rear axle shall be equipped with ArvinMeritor 16-1/2"x 7"S-cam brakes with cast brake drums. Q-Plus shoes shall be provided with up to 24,000 lb. axle ratings and P-Type shoes with over 24,000 lb. axle ratings. The rear axle brakes shall be furnished with automatic slack adjusters.ArvinMeritor brand shall be supplied on RS-24-160 and RS-25-160 axles,and Haldex brand shall be supplied on RS-26-185 and RS-30-185 axles. A 3 year/unlimited miles parts and 3-year labor rear brake warranty shall be provided as standard by ArvinMeritor Automotive.The warranty shall include bushings,seals,and cams. Brake System The vehicle shall be equipped with air-operated brakes and an anti-lock braking system (ABS).The brake system shall meet or exceed the design and performance requirements of the current Federal Motor Vehicle Safety Standard (FMVSS)-121,and the test requirements of the current NFPA 1901 Standard. A dual-treadle brake valve shall correctly proportion the braking power between the front and rear systems. The air system shall be provided with a rapid pressure build-up feature,designed to meet current NFPA 1901 requirements,to allow the vehicle to begin its emergency response as quickly as possible. A pressure-protection valve shall be installed to prevent use of the air horns or other air-operated devices should the air system pressure drop below 85 psi.This feature is designed to prevent inadvertent actuation of the emergency/parking brakes while the vehicle is in motion. 7 Confidential Proposal Specifications for the Elgin Fire Department The braking system shall be provided with a minimum of three (3) air tank reservoirs for a total air system capacity of 5,214 cu.in. One (1) reservoir shall serve as the wet tank and a minimum of one (1) tank shall be supplied for each of the front and rear axles.The total system shall carry a sufficient volume of air to comply with FMVSS-121. Tank Capacities in Cubic Inches: Wet Front Rear Total 1,738 1,738 1,738 5,214 Spring-actuated emergency/parking brakes shall be installed on the rear axle. A Bendix-Westinghouse SR-1 valve,in conjunction with a double check valve system,shall provide automatic emergency brake application when the air brake system pressure falls below 40 psi in order to safely bring the vehicle to a stop in case of an accidental loss of braking system air pressure. A four-channel Wabco ABS shall be provided to improve vehicle stability and control by reducing wheel lock-up during braking.This braking system shall be fitted to both front and rear axles.All electrical connections shall be environmentally-sealed for protection against water,weather,and vibration. The system shall constantly monitor wheel behavior during braking. Sensors on each wheel transmit wheel speed data to an electronic processor,which shall detect approaching wheel lock-up and instantly modulate (or pump) the brake pressure up to five (5) times per second to prevent wheel lock-up. Each wheel shall be individually controlled.To improve field performance,the system shall be equipped with a dual-circuit design configured in a diagonal pattern. Should a malfunction occur in one circuit,that circuit shall revert to normal braking action.A warning light at the driver's instrument panel shall signal a malfunction. The system shall also be configured to work in conjunction with all auxiliary engine,exhaust,or driveline brakes to prevent wheel lock-up. To improve maintenance troubleshooting,provisions in the system for an optional diagnostic tester shall be provided.The system shall test itself each time the vehicle is started,and a dash-mounted light shall go out once the vehicle is moving above 4 MPH. A 3 year/300,000 mile parts and labor Anti-Locking Braking System(ABS) warranty shall be provided as standard by Meritor Automotive. Park Brake Release One (1) Bendix-Westinghouse PP-5 parking brake control valve shall be supplied on the lower dash panel within easy reach of the driver. 8 Confidential Proposal Specifications for the Elgin Fire Department Emergency Release for Spring Brake An isolated and protected 1738 cu.in. air reservoir shall be installed that shall provide a protected air supply for the emergency spring brake release system.A complete loss of pressure in the dual air brake system shall not affect the isolated system.The system shall be provided with a separate dash mounted air gauge and hand valve. Brake System Fittings All air brake system hoses on the chassis shall be connected by use of compression fittings. AIR SYSTEM OPTIONS Air Dryer The chassis air system shall be equipped with a Bendix-Westinghouse ADIP air dryer to remove moisture from the air in order to help prevent the air lines from freezing in cold weather and prolong the life of the braking system components. Air Inlet A 1/4"brass quick-release air inlet with a male connection shall be provided.The inlet shall allow a shoreline air hose to be connected to the vehicle,discharging air directly into the wet tank of the air brake system. It shall be located driver door jamb. Isolated Air Reservoir The air system shall have an additional 1,738 cu.in.isolated reservoir.The supply side of the reservoir shall be equipped with a check valve and an 85-psi pressure protection valve. The isolated air reservoir air tank to be plumbed to the chassis air horns only. Heated Moisture Ejectors All air reservoirs shall be equipped with a Bendix DV-2 automatic reservoir drain valve which shall automatically eject moisture and contaminants from the reservoirs.The moisture ejectors shall be heated. Air Lines Air brake lines shall be constructed of color-coded nylon tubing routed in a manner to protect them from damage.Brass fittings shall be provided. Air Horns Dual Hadley a-tone air horns shall be provided,connected to the chassis air system.The horns shall be mounted through the front bumper.The front bumper shall have two (2) holes punched to 9 Confidential Proposal Specifications for the Elgin Fire Department accommodate the air horns.A pressure protection valve shall be installed to prevent the air brake system from being depleted of air pressure. Push-Button Switch A heavy-duty metal push-button switch shall be installed on the officer's side switch panel to operate the air horns. Stainless Steel Mounting Straps Stainless steel mounting straps shall be provided for the chassis air tanks. ENGINE & TRANSMISSION Engine/Transmission Package Engine The vehicle shall utilize a Cummins L9 engine as described below: • 450 maximum horsepower at 2200 rpm • 1250 lb.-ft peak torque at 1200 rpm • Six(6) cylinder,charge air cooled,4-cycle diesel • 543 cu.in. (8.9 liter) displacement-4.49 in bore x 5.69 in stroke • 16.6:1 compression ratio • Variable Geometry Turbocharged • Engine shall be equipped with Full-Authority Electronics • Electronic Timing Control fuel system • Fuel cooler(when equipped with a fire pump) • Cummins supplied fuel filter with integral water separator and water-in-fuel sensor approved by Cummins for use on the L9 engine • Fleetguard LF9009 Venturi Combo combination full-flow/by-pass oil filter approved by Cummins for use on the ISL engine • Engine lubrication system,including filter,shall have a minimum capacity of 25 quarts • Delco-Remy 39 MT-HD 12-volt starter • Cummins 18.7 cubic foot per minute (cfm) air compressor • Corrosion inhibitor additive for coolant system • After treatment system consisting of a oxidation catalyst and diesel particulate filter and selective catalyst reduction system • Ember separator compliant with current NFPA 1901 standard • The engine shall be compliant with 2021 EPA Emission standards The engine air intake shall draw air through the front cab grill.The intake opening shall be located on the officer(right) side behind front cab face with a plenum that directs air to the air filter.The air cleaner shall be an 11"diameter dry type that is easily accessed for service.Air cleaner intake piping shall be made from aluminized steel tubing with flexible rubber hoses.Air cleaner intake piping clamps shall be heavy-duty,constant-torque,T-bolt clamps to ensure proper sealing under all 10 Confidential Proposal Specifications for the Elgin Fire Department temperatures in order to keep dust and other contaminants out of the engine intake air stream and protect the engine. The engine exhaust piping shall be a minimum of 4"diameter welded stainless steel tubing. The aftertreatment system shall be mounted horizontally under the right-hand frame rail in back of the cab in order to minimize heat transmission to the cab and its occupants.The exhaust shall be directed away from the vehicle on the right side ahead of the rear wheels in order to keep exhaust fumes as far away as possible from the cab and pump operator position. A 5-year/100,000-miles parts and labor warranty shall be provided as standard by Cummins. Transmission The vehicle shall utilize an Allison EVS3000P,electronic,5-speed automatic transmission. A transmission oil temperature gauge with warning light and buzzer shall be installed on the cab instrument panel to warn the driver of high oil temperatures that may damage the transmission. The transmission shall have a gross input torque rating of 1250 lb.-ft. and a gross input power rating of 450 HP. The gear ratios shall be as follows: 1 - 3.49 2 - 1.86 3 - 1.41 4- 1.00 5 - .75 R- 5.03 The transmission shall have an oil capacity of 23 quarts and shall be equipped with a fluid level sensor(FLS) system,providing direct feedback of transmission oil level information to the driver. A water-to-oil transmission oil cooler shall be provided to ensure proper cooling of the transmission when the vehicle is stationary(no air flow). Air-to-oil transmission oil coolers,which require constant air flow,are not acceptable. The transmission shall be provided with two (2) engine-driven PTO openings located at the 4 o'clock and 8 o'clock positions for flexibility in installing pto-driven equipment. The automatic transmission shall be equipped with a power lock-up device.The transmission lock- up shall prevent down shifting of the transmission when the engine speed is decreased during pump 11 Confidential Proposal Specifications for the Elgin Fire Department operations,thereby maintaining a constant gear ratio for safe operation of the pump.The transmission lock-up shall be automatically activated when the pump is engaged in gear.The transmission lock-up shall be automatically deactivated when the pump is disengaged for normal road operation. A 5-year/unlimited miles parts and labor warranty shall be provided as standard by Allison Transmission. Transmission Selector A push-button transmission shift module shall be located to the right side of the steering column within easy reach of the driver.The shift position indicator shall be indirectly lit for after dark operation.The shift module shall have a"Do Not Shift"light and a"Service"indicator light.The shift module shall have means to enter a diagnostic mode and display diagnostic data including oil life monitor, filter life monitor,transmission health monitor and fluid level.A transmission temperature gauge with warning light and buzzer shall be installed on the cab instrument panel. Transmission Fluid The transmission fluid shall be TranSynd,Shell Spirax S6ATF A295,or equivalent synthetic. Vehicle Speed The maximum speed shall be electronic limited to 68 MPH as required by NFPA 1901. Note: Maximum speed may be set at 65 MPH due to tire rating. Automatic Shift to Neutral The transmission shall be programmed to comply with NFPA 1901 and automatically shift to neutral upon application of the parking brake. SECONDARY BRAKING Jacobs Engine Brake One (1)Jacobs engine brake shall be installed to assist in slowing and controlling the vehicle as required by NFPA 1901 for vehicles with gross vehicle weight ratings (GVWR) of 36,000 lbs. or greater.An on-off control switch and a high-medium-low selector switch shall be mounted in the cab accessible to the driver. When activated,the Jacobs engine brake shall cut off the flow of fuel to the cylinders and alter the timing of the exhaust valves.This shall transform the engine into a high-pressure air compressor, driven by the wheels,and the horsepower absorbed by the engine in this mode shall slow the vehicle.The selector switch allows the driver to select the amount of retarding power. 12 Confidential Proposal Specifications for the Elgin Fire Department When the on-off switch is in the"on"position,the engine brake shall be automatically applied whenever the accelerator is in the idle position and the automatic transmission is in the lock-up mode. If the accelerator is depressed or if the on-off switch is placed in the"off'position,the engine brake shall immediately release and allow the engine to return to its normal function. Transmission Programming The transmission shall include the Allison 2nd gear Pre-Select feature. This option will direct the transmission to down shift to second gear when the throttle is released and the Jacobs engine brake is engaged. This feature is designed to increase brake life and aid vehicle braking. COOLING PACKAGE Engine Cooling Package Radiator The cooling system shall include an aluminum tube-and-fin radiator with a minimum of 1,408 total square inches of frontal area to ensure adequate cooling under all operating conditions.There shall be a drain valve in the bottom tank to allow the radiator to be serviced.A sight glass shall be included for quick fluid level assessment.The radiator shall be installed at the prescribed angle in order to achieve the maximum operational effectiveness.This shall be accomplished according to established work instructions and properly calibrated angle measurement equipment. Silicone Hoses All radiator and heater hoses shall be silicone. Pressure compensating band clamps shall be used to eliminate hose pinching on all hoses 3/4" diameter and larger.All radiator hoses shall be routed, loomed,and secured so as to provide maximum protection from chafing,crushing,or contact with other moving parts. Coolant The cooling system shall be filled with a 50/50 mixture of water and antifreeze/coolant conditioner to provide freezing protection to minus 40 (-40) degrees F for operation in severe winter temperatures. Coolant Recovery There shall be a coolant overflow recovery system provided. Charge Air Cooler System The system shall include a charge air cooler to ensure adequate cooling of the turbocharged air for proper engine operation and maximum performance. 13 Confidential Proposal Specifications for the Elgin Fire Department Charge Air Cooler Hoses Charge air cooler hoses shall be made from high-temperature,wire-reinforced silicone to withstand the extremely high temperatures and pressures of the turbocharged air.The hoses shall incorporate a flexible hump section to allow motion and misalignment of the engine relative to the charge air cooler. Charge air cooler hose clamps shall be heavy-duty,constant-torque,T-bolt clamps to ensure proper sealing under all temperatures in order to keep dust and other contaminants out of the engine intake air stream and protect the engine. Fan/Shroud The fan shall be 30"in diameter with eleven (11) blades for maximum airflow and dynamic balance. It shall be made of nylon for strength and corrosion resistance.The fan shall be installed with grade 8 hardware which has been treated with thread locker for additional security. A fan shroud attached to the radiator shall be provided to prevent recirculation of engine compartment air around the fan in order to maximize the cooling airflow through the radiator. The fan shroud shall be constructed of fiber-reinforced high temperature plastic. The shroud shall be specifically formed with curved surfaces which improves air flow and cooling. Transmission Cooler The cooling system shall include a liquid-to-liquid transmission cooler capable of cooling the heat generated from the transmission.When a transmission retarder is selected,the cooler shall have an increased capacity to handle the additional heat load. FUEL SYSTEMS Fuel Re-Prime An auxiliary 12-volt fuel pump shall be included in the fuel system.The electric pump shall permit re-priming of the fuel lines and engine.The pump may be manually operated with a switch located accessible to driver.The electric pump shall also automatically operate in conjunction with the mechanical fuel pump as long as engine oil pressure is present.The system shall be plumbed to allow full flow to by-pass the pump. Fuel Line All fuel lines shall be rubber. Fuel/Water Separator A Racor fuel/water separator shall be installed in place of the Cummins fuel/water separator with drain.The unit shall utilize a three-step separate process: centrifuge for primary contaminant separation,conical baffles for water coalescing,and a replaceable filter for final particulate removal. The separator shall have a bottom drain for removing contaminants,shall be heated and shall have a rated maximum flow of 3.16 GPM.A sensor with indicator light and audible alarm shall be provided for the Racor fuel/water separator.The indicator light shall be mounted in the cab visible 14 Confidential Proposal Specifications for the Elgin Fire Department to the driver with the unit located inside the frame rails (as applicable).The unit will alert the driver of high water content in the separator bowl. Fuel System One (1) 50-gallon fuel tank shall be provided.The tank shall be of an all-welded,stainless-steel construction with anti-surge baffles and shall conform to all applicable Administration (FHWA) 393.65 and 393.67 standards.The tank shall be mounted below the frame rails at the rear of the chassis for maximum protection.The tank shall be secured with two (2)wrap-around T-bolt type stainless steel straps. Each strap shall be fitted with protective rubber insulation and shall be secured with grade 8 hardware.This design allows for tank removal from below the chassis. The fuel tank shall be equipped with a 2" diameter filler neck.The filler neck shall extend to the rear of the vehicle behind the rear tires and away from the heat of the exhaust system as required by NFPA 1901 Standard for Automotive Fire Apparatus.The open end of the filler neck shall be equipped with a twist-off filler cap with a retaining chain. The tank shall be plumbed with top-draw and top-return fuel lines in order to protect the lines from road debris.Bottom-draw and/or bottom-return fuel lines are not acceptable.A vent shall be provided at the top of the tank. The vent shall be connected to the filler neck to prevent splash- back during fueling operations.A .50" NPT drain plug shall be provided at the bottom of the tank. The tank shall have a minimum useable capacity of 50 gallons of fuel with a sufficient additional volume to allow for thermal expansion of the fuel without overflowing the vent. A mechanical fuel pump shall be provided and sized by the engine manufacturer as part of the engine. ALTERNATOR 420 Amp Alternator There shall be a 420-amp Leece Neville alternator installed as specified.The alternator shall be a Leece Neville brushless type with integral rectifier and adjustable voltage regulator with an output of 369 amps per NFPA 1901 rating(420 amps per SAE J56). BATTERIES Battery System The manufacturer shall supply five (5) heavy-duty Group 31 12-volt maintenance-free batteries. Each battery shall be installed and positioned so as to allow easy replacement of any single battery. Each battery shall be equipped with carrying handles to facilitate ease of removal and replacement. 15 Confidential Proposal Specifications for the Elgin Fire Department There shall be two (2) steel frame-mounted battery boxes,one (1) on the left frame rail and one(1) on the right frame rail. Each battery box shall be secured to the frame rail with Grade 8 hardware. The boxes shall hold two (2) batteries on the left side and three (3) on the right side.The batteries shall have a minimum combined rating of 5,000 (5 x 1000) cold cranking amps (CCA) @ 0 degrees Fahrenheit and 1025 (5 x 205) minutes of reserve capacity for extended operation.The batteries shall have 3/8-16 threaded stud terminals to ensure tight cable connections.The battery stud terminals shall each be treated with concentrated industrial soft-seal after cable installation to promote corrosion prevention.The positive and negative battery stud terminals and the respective cables shall be clearly marked to ensure quick and mistake-proof identification. Batteries shall be placed on non-corrosive rubber matting and secured with hold-down brackets to prevent movement,vibration,and road shock.The hold-down bracket J-hooks shall be cut to fit and shall have all sharp edges removed.The batteries shall be placed in plastic trays to provide preliminary containment should there be leakage of hazardous battery fluids.There shall be two (2) Plastic trays,one (1) for each set of batteries. Each battery tray shall be equipped with a rubber hose to facilitate drainage.The rubber hose shall be routed to drain beneath the battery box.The batteries shall be positioned in well-ventilated areas. One (1) positive and one (1) negative jumper stud shall be provided. Batteries shall have a warranty of twelve (12) months that shall commence upon the date of delivery of the apparatus. CHASSIS OPTIONS Engine Fan Clutch The engine shall be equipped with a thermostatically controlled engine cooling fan.The fan shall be belt driven and utilize a clutch to engage when the engine reaches a specified temperature. When disengaged,the fan clutch shall allow for improved performance from optional floor heaters, reduced cab interior noise,increased acceleration and improved fuel economy. The fan shall be equipped with a fail-safe engagement so that if the clutch fails the fan shall engage to prevent engine overheating. Drivelines Drivelines shall have a heavy-duty metal tube and shall be equipped with Spicer 171OHD universal joints to allow full-transmitted torque to the axle(s). Drive shafts shall be axially straight,concentric with axis and dynamically balanced. Rear Tow Eyes Two (2) heavy-duty tow eyes made of 3/4" (0.75") thick steel having 2-1/2" diameter holes shall be mounted below the body at the rear of the vehicle to allow towing(not lifting) of the apparatus without damage.The tow eyes will be welded to the lower end of a 5" steel channel that is bolted at the end of the chassis frame rails.The tow eyes shall be painted chassis black. 16 Confidential Proposal Specifications for the Elgin Fire Department Rear Trailer Hitch A rear mounted Class III trailer hitch shall be constructed of 2-1/2"x 2-1/2" steel tubing and 5" steel channel.The hitch shall be securely attached to the chassis frame and painted black.The hitch shall be supplied without a ball and pin. Front Tow Hooks Two (2) heavy-duty painted front tow hooks shall be securely bolted to the front chassis frame rail extensions to allow towing(not lifting) of the apparatus without damage.They shall be mounted in the downward position. DEF Tank A diesel exhaust fluid (DEF) tank with a five (5) gallon capacity shall be provided. The DEF tank shall include a heater fed by hot water directly from the engine block to prevent the DEF from becoming too cool to operate correctly per EPA requirements.The tank shall include a temperature sensor to control the heater control valve that controls the feed of hot water from the engine to the DEF tank heater. A sender shall be provided in the DEF tank connected to a level gauge on the cab dash. The tank shall be located left side below rear of cab. Power Steering Cooler A heat exchanger(cooler) shall be installed to maintain desired power steering fluid temperature. The cooler shall be a Model DH-073-1-1 with air/ oil design rated at 6300 BTU./HR @10 GPM. The cooler shall be mounted in front of the radiator and plumbed with#10 lines. CAB Cyclone Cab The vehicle shall be distinguished by an all-welded aluminum and fully enclosed tilt cab. The cab shall be designed exclusively for fire/rescue service and shall be pre-engineered to ensure long life. It shall incorporate an integral welded substructure of high-strength aluminum alloy extrusions that creates an occupant compartment that is essentially a protective perimeter. The end result is a distinctive structure that is aesthetically appealing, functionally durable,and characterized by increased personnel safety. The cab shall be constructed from 3/16" (0.188") 3003 H14 aluminum alloy plate roof, floor,and outer skins welded to a high-strength 6063-T6 aluminum alloy extruded subframe.Wall supports and roof bows are 6061 T6 aluminum alloy.This combination of a high-strength,welded aluminum inner structure surrounded on all sides by load-bearing,welded aluminum outer skins provides a cab that is strong,lightweight,corrosion-resistant,and durable. 17 Confidential Proposal Specifications for the Elgin Fire Department The inner structure shall be designed to create an interlocking internal"roll-cage" effect by welding two (2) 3"x 3"x 0.188"wall-thickness 6063-T5 aluminum upright extrusions between the 3"x 3" x 0.375"wall-thickness 6061-T6 roof crossbeam and the 2.25"x 3"x 0.435"wall-thickness 6063-T6 subframe structure in the front.An additional two (2) aluminum upright extrusions within the back- of-cab structure shall be welded between the rear roof perimeter extrusion and the subframe structure in the rear to complete the interlocking framework.The four(4) upright extrusions --two (2) in the front and two (2) in the rear--shall be designed to effectively transmit roof loads downward into the subframe structure to help protect the occupant compartment from crushing in a serious accident.All joints shall be electrically seam welded internally using aluminum alloy welding wire. The subframe structure shall be constructed from high-strength 6061-T6 aluminum extrusions welded together to provide a structural base for the cab. It shall include a side-to-side 3"x 1.5" .375 thick C-channel extrusion across the front,with 3/4"x 2-3/4" (.75"x 2.75") full-width crossmember tubes spaced at critical points between the front and rear of the cab. The cab floor shall be constructed from 3/16" (0.188") 3003 H14 smooth aluminum plate welded to the subframe structure to give the cab additional strength and to help protect the occupants from penetration by road debris and under-ride collision impacts. The cab roof shall be constructed from 3/16" (0.188'� 3003 H14 aluminum treadplate supported by a grid of fore-aft and side-to-side aluminum extrusions to help protect the occupants from penetration by falling debris and downward-projecting objects.Molded fiberglass or other molded fiber-reinforced plastic roof materials are not acceptable. The cab roof perimeter shall be constructed from 4"x 6-5/8" (4"x 6.625") 6063-T5 aluminum extrusions with integral drip rails. Cast aluminum corner joints shall be welded to the aluminum roof perimeter extrusions to ensure structural integrity.The roof perimeter shall be continuously welded to the cab roof plate to ensure a leak-free roof structure. The cab rear skin shall be constructed from 3/16" (0.188") 3003 H14 aluminum plate. Structural extrusions shall be used to reinforce the rear wall. The left-hand and right-hand cab side skins shall be constructed from 3/16" (0.188") 3003 H14 smooth aluminum plate.The skins shall be welded to structural aluminum extrusions at the top, bottom,and sides for additional reinforcement. The cab front skins shall be constructed from 3/16" (0.188'� 3003 H14 smooth aluminum plate. The upper portion shall form the windshield mask,and the lower portion shall form the cab front. Each front corner shall have a full 9"outer radius for strength and appearance.The left-hand and right-hand sides of the windshield mask shall be welded to the left-hand and right-hand front door frames,and the upper edge of the windshield mask shall be welded to the cab roof perimeter extrusion for reinforcement.The cab front shall be welded to the subframe C-channel extrusion below the line of the headlights to provide protection against frontal impact. 18 Confidential Proposal Specifications for the Elgin Fire Department Cab Exterior The exterior of the cab shall be 100"wide x 130"long to allow sufficient room in the occupant compartment for up to eight (8) fire fighters.The cab roof shall be approximately 101" above the ground with the flat roof option.The back-of-cab to front axle length shall be 58". Front axle fenderette trim shall be brushed aluminum for appearance and corrosion resistance. Bolt-in front wheel well liners shall be constructed of 3/16" (0.188") composite material to provide a maintenance-free,damage-resistant surface that helps protect the underside of the cab structure and components from stones and road debris. A large stainless steel cooling air intake grille with an open area of no less than 81%shall be at the front of the cab. The cab windshield shall be of a two-piece replaceable design for lowered cost of repair.The windshield shall be made from 1/4" (0.25") thick curved,laminated safety glass with a 75%light transmittance automotive tint.A combined minimum viewing area of 2,765-sq.in. shall be provided. Forward visibility to the ground for the average (50th percentile) male sitting in the driver's seat shall be no more than 11 feet 7 inches from the front of the cab to ensure good visibility in congested areas. Windshield Wipers Two (2) opposed radial style windshield wipers with two (2) separate electric motors shall be provided for positive operation.The wipers shall be a wet-arm type with a one (1) gallon washer fluid reservoir,an intermittent-wipe function,and an integral wash circuit.Wiper arm length shall be approximately 20",and the blade length 21". Each arm shall have a 90 degree sweep for full coverage of the windshield.The wipers shall be synchronized so as to wipe each windshield simultaneously. Cab Mounts and Cab Tilt System The cab shall be independently mounted from the body and chassis to isolate the cab structure from stresses caused by chassis twisting and body movements.Mounting points shall consist of two (2) forward-pivoting points,one (1) on each side;two (2) intermediate rubber load-bearing cushions located midway along the length of the cab,one on each side;and two (2) combination rubber shock mounts and cab latches located at the rear of the cab,one (1) on each side. An electric-over-hydraulic cab tilt system shall be provided to provide easy access to the engine. It shall consist of two (2) large-diameter,telescoping,hydraulic lift cylinders,one (1) on each side of the cab,with a frame-mounted electric-over-hydraulic pump for cylinder actuation. Safety flow fuses (velocity fuses) shall be provided in the hydraulic lift cylinders to prevent the raised cab from suddenly dropping in case of a burst hydraulic hose or other hydraulic failure.The safety flow fuses shall operate when the cab is in any position,not just the fully raised position. The hydraulic pump shall have a manual override system as a backup in the event of an electrical failure. Lift controls shall be located in a compartment to the rear of the cab on the right side of the 19 Confidential Proposal Specifications for the Elgin Fire Department apparatus. A parking brake interlock shall be provided as a safety feature to prevent the cab from being tilted unless the parking break is set. The entire cab shall be tilted through a 42-45 degree arc to allow for easy maintenance of the engine,transmission and engine components.A positive-engagement safety latch shall be provided to lock the cab in the full tilt position to provide additional safety for personnel working under the raised cab. In the lowered position,the cab shall be locked down by two (2) automatic,spring-loaded cab latches at the rear of the cab.A"cab ajar"indicator light shall be provided on the instrument panel to warn the driver when the cab is not completely locked into the lowered position. Cab Interior The interior of the cab shall be of the open design with an ergonomically-designed driver area that provides ready access to all controls as well as a clear view of critical instrumentation. The engine cover between the driver and the officer shall be a low-rise contoured design to provide sufficient seating and elbow room for the driver and the officer.The engine cover shall blend in smoothly with the interior dash and flooring of the cab.An all-aluminum subframe shall be provided for the engine cover for strength.The overall height of the engine enclosure shall not exceed 23" from the floor at each side and 27"in the center section.The engine cover shall not exceed 41"in width at its widest point. The rear portion of the forward engine cover shall be provided with a lift-up door to provide easy access for checking and filling engine oil,transmission fluid and power steering fluid without raising the cab (a separate access panel shall be provided for the power steering when equipped with an X12 or X15 engine). The engine cover insulation shall consist of 1/2"closed cell elastomeric compound foam with aluminum foil faced fiberglass fabric manufactured to specifically fit the engine cover.All edges and seams shall be sealed using aluminum foil faced fiberglass tape.The insulation shall meet or exceed DOT standard FMVSS 302-1 and V-0 (UI subject 94 Test). All cab floors shall be covered with a black rubber floor mat that provides an aggressive slip- resistant surface in accordance with current NFPA 1901. The rear engine cover area shall be covered with molded 18 lb/cu. ft. (+/-0.5) flexible integral skinned polyurethane foam at a Durometer of 60 (+/- 5.0) per ASTM F1957-99.The cover shall be approximately.5" thick with a minimum skin thickness of 0.0625 inches.The cover shall be provided to reduce the transmission of noise and heat from the engine.The cover shall be black with a pebble grain finish for slip resistance. A minimum of 57.25"of floor-to-ceiling height shall be provided in the front seating area of the cab and a minimum of 55.25" floor-to-ceiling height shall be provided in the rear seating area.A minimum of 36" of seated headroom at the "H" point shall be provided over each fenderwell. 20 Confidential Proposal Specifications for the Elgin Fire Department The interior side to side dimensions shall be 93" from wall padding to wall padding and 95.5" from door to door. The floor area in front of the front seat pedestals shall be no less than 27" side to side by up to 25" front to rear for the driver and no less than 27" side to side by up to 27" front to rear for the officer to provide adequate legroom. Battery jumper studs shall be provided to allow jump-starting of the apparatus without having to tilt the cab.The studs shall be located in the driver's door area unless specified otherwise. All exposed interior metal surfaces shall be pretreated using a corrosion prevention system. The interior of the cab shall be insulated to ensure the sound (dbA) level for the cab interior is within the limits stated in the current edition of NFPA 1901. Insulation with padded interior panels shall consist of 2 oz.wadding and 1/4" (0.25") foam padding.The padding board shall be backed with 1/4" (0.25") thick reflective insulation. The backing shall be spun-woven polyester. Interior cab padding shall consist of a rear cab headliner,a rear wall panel,and side panels between the front and rear cab doors. The vehicle shall use a seven-position tilt and telescopic steering column to accommodate various size operators.An 18"padded steering wheel with a center horn button shall be provided. The driver and officer seat risers shall be welded to the main cab floor structure. Depending on the make and Model of the seats,a storage compartment with a hinged door shall be provided in the risers. The lower front cab steps shall be a minimum of 13.5" deep x 24"wide.The lower rear cab steps shall be a minimum 19" deep x 21"wide.The first step at the front and rear cab doors shall be no more than 24.0"above the ground with standard tires in the unloaded condition per NFPA 1901 standards.The front and rear steps shall incorporate full width intermediate steps for easy access to the cab interior.The intermediate step at the front doors shall be approximately 8" deep (minimum).The intermediate step at the rear doors shall be approximately 13.75" deep (minimum). The step surfaces shall be aluminum diamond plate with a multi-directional,aggressive gripping surface incorporated into the aluminum diamond plate in accordance with current NFPA 1901. A handle shall be provided on the interior of each front door below the door window to ensure proper hand holds while entering and exiting the cab.An additional black grip handle shall be provided on the left and right side windshield post for additional handholds. Cab Doors Four(4) side-opening cab doors shall be provided.Doors shall be constructed of a 3/16" (0.188") aluminum plate outer material with an aluminum extruded inner framework to provide a structure that is as strong as the side skins. Front cab door openings shall be approximately 36"wide x 72.5"high,and the rear cab door openings shall be approximately 33.75"wide x 72.5" high.The doors shall have limit straps set to allow the doors to open approximately 85 degrees. 21 Confidential Proposal Specifications for the Elgin Fire Department The doors shall be securely fastened to the doorframes with full-length,stainless steel piano hinges, with 3/8" (0.375") diameter pins for proper door alignment,long life,and corrosion resistance. Mounting hardware shall be treated with corrosion-resistant material prior to installation. For effective sealing,an extruded rubber gasket shall be provided around the entire perimeter of all doors. The front door windows shall provide a minimum viewing area of 518 sq.in. each.The rear door windows shall provide a minimum viewing area of 554 sq.in. each.All windows shall have 75% light transmittance automotive safety tint. The door handles on the exterior of the cab shall be a pull type with vertical orientation.The handles shall be made with corrosion free material and have a black finish.Each exterior door handle shall have an integral keyed lock. Recessed paddle-style door latches shall be provided on the interiors of the doors.The latches shall be designed and installed to protect against accidental or inadvertent opening as required by NFPA 1901.The rear cab door handles shall have a vertical orientation making them easily accessible from forward or rearward outboard seating positions. Each cab door shall have a manually operated door lock actuated from the interior of each respective door. Cab Instruments and Controls Cab controls shall be located on the cab instrument panel in the dashboard on the driver's side where they are clearly visible and easily reachable. Chassis operation switches shall be installed in removable panels for ease of service.The following gauges and/or controls shall be provided: • Speedometer/Odometer •Tachometer •Engine hour meter • Engine oil pressure gauge with warning light and buzzer • Engine water temperature gauge with warning light and buzzer •Transmission oil temperature gauge •Two (2) air pressure gauges with a warning light and buzzer(front air and rear air) • Fuel gauge with low fuel indicator light •Voltmeter • Master battery/ignition switch (rocker with integral guard) • Engine start switch (rocker) • Heater and defroster controls with illumination • Marker light/headlight control switch (rocker) •Panel light dimmer switch (rocker) • Self-canceling turn signal control with indicators •Windshield wiper switch with variable speed and washer controls •Pump shift control with green"pump in gear" and"o.k. to pump"indicator lights •Parking brake controls with red indicator light on dash •Automatic transmission shift console • Electric horn button at center of steering wheel •Master warning light switch 22 Confidential Proposal Specifications for the Elgin Fire Department • Cab ajar warning indicator •Air filter restriction indicator Controls and switches shall be identified as to their function by backlit wording adjacent to each switch,or indirect panel lighting adjacent to the controls. Electrical System The cab and chassis system shall have designated electrical distribution areas.All electrical components shall be located such that standard operations shall not interfere with or disrupt vehicle operation.An access cover shall be provided for maintenance access to the electrical distribution area. Circuit protection shall be provided by fuses,thermal reset breakers and/ or solid state controls. A 6 place,constantly hot,and 6 place ignition switched fuse panel and ground for customer- installed radios and chargers shall be provided at the electrical distribution area. Radio suppression shall be sufficient to allow radio equipment operation without interference. All wiring shall be mounted in the chassis frame and protected from impact,abrasion,water,ice, and heat sources.The wiring shall be color-coded and functionally-labeled every 3"on the outer surface of the insulation for ease of identification and maintenance.The wiring harness shall conform to SAE 1127 with GXL temperature properties.Any wiring connections exposed to the outside environment shall be weather-resistant.All harnesses shall be covered in a loom that is rated at 280 degrees F to protect the wiring against heat and abrasion. Daytime Running Lights Two (2) dual rectangular chrome plated headlight bezels shall be installed on the front of the cab. The low beam headlights shall activate with the release of the parking brake to provide daytime running lights (DRL) for additional vehicle conspicuity and safety.The headlight switch shall automatically override the DRL for normal low beam/high beam operation. Fast Idle System A fast idle system shall be provided and controlled by a switch accessible by the driver.The system shall increase engine idle speed to a preset RPM for increased alternator output. Cab Crashworthiness Requirement The apparatus cab shall meet and/or exceed relevant NFPA 1901 load and impact tests required for compliance certification with the following: Side Impact Dynamic Pre-Load per SAE J2422 (Section 5). Testing shall meet and/or exceed defined test using 13,000 ft-lbs of force as a requirement.The cab shall be subject to a side impact representing the force seen in a roll-over.The cab shall exhibit minimal to no intrusion into the cab's occupant survival space,doors shall remain closed and cab shall remain attached to frame. 23 Confidential Proposal Specifications for the Elgin Fire Department Cab testing shall be completed using 13,776 ft-lbs of force exceeding testing requirements. Quasi-static Roof Strength (proof loads) per SAE J2422 (Section 6) / ECE R29,Annex 3, paragraph 5. Testing shall meet and/or exceed defined test using 22,046 lbs of mass as a requirement.Testing shall be completed using platen(s) distributed uniformly over all bearing members of the cab roof structure. Cab testing shall be completed using 23,561 lbs of mass exceeding testing requirements.The cab shall exhibit minimal to no intrusion into the cab's occupant survival space and doors shall remain closed. Additional cab testing shall be conducted using 117,336 lbs of mass exceeding testing requirements by over five (5) times.The cab shall exhibit minimal to no intrusion into the cab's occupant survival space and the doors shall remain closed. Frontal Impact per SAE J2420. Testing shall meet and/or exceed defined test using 32,549 ft-lbs of force as a requirement.The cab shall be subject to a frontal impact as defined by the standard. The cab shall exhibit minimal to no intrusion into the cab's occupant survival space,doors shall remain closed and cab shall remain attached to frame. Cab testing shall be completed using 34,844 ft-lbs of force exceeding testing requirements. Additional cab testing shall be conducted using 65,891 ft-lbs of force exceeding testing requirements by over two (2) times. The cab shall meet all requirements to the above cab crash worthiness;NO EXCEPTIONS. A copy of a certificate or letter verifying compliance to the above performance by an independent, licensed,professional engineer shall be provided upon request. For any or all of the above tests,the cab manufacturer shall provide either photographs or video footage of the procedure upon request. Seat Mounting Strength The cab seat mounting surfaces shall be third party tested and in compliance with FMVSS 571.207. Seat Belt Anchor Strength The cab seat belt mounting points shall be third party tested and in compliance with FMVSS 571.210. 24 Confidential Proposal Specifications for the Elgin Fire Department ISO Compliance E-ONE as the manufacturer shall ensure that the construction of the apparatus cab shall be in conformance with the established ISO-compliant quality system.All written quality procedures and other procedures referenced within the pages of the manufacturer's Quality Manual,as well as all Work Instructions,Workmanship Standards,and Calibration Administration that directly or indirectly impacts this process shall be strictly adhered to.By virtue of its ISO compliance the manufacturer shall provide an apparatus cab that is built to exacting standards,meets the customer's expectations,and satisfies the customer's requirements. CAB ROOF TYPE Cab Roof The cab shall have a flat roof. CAB DOOR OPTIONS Cab Door Locks The cab shall have 1250 keyed door locks provided on the exterior entry doors to secure the apparatus. Cab Door Panels The inner door panels shall be made from 1/8" (.125") aluminum plate painted Zola.tone (to match cab interior paint) for increased durability.The cab door panels shall be split just below the the handrail and incorporate an easily removable panel for access to the latching mechanism and window regulator for maintenance or service. Cab Door Locks Each cab door shall have a manually operated door lock actuated from the interior of each respective door. Exterior of each cab door shall be provided with a keyed lock integrated with the cab door handle. Cab Door Reflective Material Reflexite V98 Red/Fluorescent Yellow Green striping shall be provided approximately 12" high on the lower cab door panels.The stripes shall run from the top outer corner to the bottom inside corner of the lower door area,forming a "A" shape when viewed from the rear.The reflective material shall meet NFPA 1901 requirements. 25 Confidential Proposal Specifications for the Elgin Fire Department Warning Lights Four(4) Whelen WIOND Series Super LED (Light Emitting Diode) split red/amber Model WIONSMK shall be provided.The rectangular lights shall be wired with weatherproof connectors and shall be mounted one (1) each on the interior lower cab door outboard. Each light shall be wired through each discrete cab door. Cab Compartment Door Trim A anodize aluminum trim shall be located at the bottom edge of the cab exterior compartment openings.The trim shall provide added protection of the painted surface of the cab when equipment is placed or removed from the compartments. Cab Front Door Windows Full roll-down windows shall be provided for the front cab doors with manually operated worm gear drive cable operation for positive operation and long life. Scissors or gear-and-sector drives are not acceptable. Cab Rear Door Windows Full roll-down windows shall be provided for the rear crew doors with manually operated worm gear drive cable operation for positive operation and long life. Cab Door Style The cab doors shall be barrier style with exposed lower steps. Door Handles The door handles on the exterior of the cab shall be a pull type with vertical orientation.The handles shall be made with corrosion free glass reinforced nylon material and have a black finish. The handles shall have clearance for a gloved hand. Each exterior door handle shall have an integral keyed lock. MIRRORS Cab Mirrors There shall be two (2) Lang Mekra 300 Aero Series Technology Mirrors provided,one (1) driver's and one (1) officer's side.The mirrors shall be chrome-plated on the main head,be remote controlled with a four-way power system and be heated.There shall be LED marker lights with bezel on the main head,and LED arrow lights in the mirror glass.The main flat glass shall provide 120 square inches of viewable surface space. 26 Confidential Proposal Specifications for the Elgin Fire Department There shall be separate heads for the driver's and officer's side housing convex glass and provide 56 square inches of viewing surface. The mirrors shall be mounted on the cab doors. MISCELLANEOUS EXTERIOR CAB OPTIONS Front Mud Flaps Black linear low-density polyethylene (proprietary blend) mud flaps shall be installed on the rear of the cab front wheel wells.The design of the mud flaps shall have corrugated ridges to distribute water evenly. Rear Cab Wall Construction The rear cab wall shall be constructed with the use of 3/16" aluminum diamond plate interlocking in aluminum extrusions. Knurled Hand Rail Extrusion Cab exterior hand rails shall utilize Austin Hardware Model GR-002-AL-BRT-144 knurled bright anodized aluminum tubes.The hand rail extrusions shall be machine extruded with integral ribbed surfaces and knurled grip surfaces to assure a good grip for personnel safety. Cab Wheel Well The cab wheel well shall be increased in size to provide additional clearance for larger tires. The fender trim shall be adjustable in and out to better accommodate various wheel/ tire offsets. Receptacle Mounting Plate A mounting plate shall be provided for the battery charger receptacle,battery charger indicator and if applicable the air inlet,etc.The plate shall be constructed of 14 gauge brushed finish stainless steel and be removable for service access to the receptacle and indicator. HVAC Air Conditioning An overhead air-conditioner/ heater system with a single radiator mounted condenser shall be supplied. The unit shall be mounted to the cab interior headliner in a mid-cab position,away from all seating positions. The unit shall provide fourteen (14) comfort discharge louvers,eight(8) to the back area of the cab,six(6) to the front area of the cab including one (1) each side outboard in the forward overhead console. These louvers will be used for both AC and heated air delivery. Two (2) 27 Confidential Proposal Specifications for the Elgin Fire Department additional large front louvers shall be damper controlled to provide defogging and defrosting capabilities to the front windshield as necessary. The unit shall consist of a high output evaporator coil and heater core with one (1) high output dual blower for front air delivery,and two (2) high performance single wheel blowers for rear air delivery. For improved corrosion resistance the evaporator shall have a hydrophilic blue fin coating. The control panel shall actuate the air-distribution system using electric actuators. The control panel shall allow blended airflow to both the comfort air vents and defrost vents. Separate three- speed blower switches shall be provided to independently control air speed for the front and rear blowers. The condenser shall be radiator mounted and have a minimum capacity of 65,000 BTUs and shall include a receiver drier. Performance Data: (Unit only,no ducting or louvers) •AC BTU: 55,000 •Heat BTU: 65,000 • CFM: 1300 @ 13.8V (All blowers) The compressor shall be a ten-cylinder swash plate type Seltec Model TM-31HD with a capacity of 19.1 cu.in. per revolution. The system shall be capable of cooling the interior of the cab from 100 degrees ambient to 75 degrees or less with 50%relative humidity in 30 minutes or less. HVAC Control Location Heating and air conditioning controls shall be located in the center dash area. SEATS Cab Seats All cab seats shall be Valor brand. Seat Cover Material All seats shall have Valor Tech XD military grade upholstery material. Seat Fabric Color The color of all seats shall be black with red top stitching. 28 Confidential Proposal Specifications for the Elgin Fire Department Driver Seat An USSC Valor P1A air suspension seat shall be supplied for the driver's position. Features shall include: • DymetrolO Active suspension • Low-profile air suspension • 2.75 Suspension stroke • 350 lb. capacity • Fore and aft adjustable tracks with 6-inches of travel • Rotational knob for infinitely adjustable lumbar • Adjustable seat backrest • Integral headrest Officer Seat An USSC Valor P1A air suspension SCBA seat shall be supplied for the officer's position. Features shall include: • Dymetrol®Active suspension • Low-profile air suspension • 2.75 Suspension stroke • 350 lb. capacity 95-Degree back angle • Fixed headrest • Magnetic SCBA harness securement Dynamic SCBA Recess The Officer's Seat Valor SCBA seats shall have a dynamic adjustable SCBA recess.The feature shall automatically adjust in depth to the seated occupant. Rear Wall Seats Two (2) USSC Valor SCBA seat backs and a two (2) person bench style seat bottom with a single cushion shall be mounted on the rear wall of the cab.Each side of the seat riser shall be angled, providing sufficient leg room while entering and exiting the cab. Features shall include: • Fixed headrest • Magnetic SCBA harness securement • Bench cushion shall be constructed of high-density foam with a heavy-duty wear resistant material. 29 Confidential Proposal Specifications for the Elgin Fire Department Seat Belts All seat positions shall have a bright red retractable 3-point lap and shoulder harness,providing additional safety and security for personnel. Extensions shall be provided with the seat belts so the male end can be easily grasped and the female end easily located while sitting in a normal position. Seat Belt Extenders ReadyReach seat belt extenders shall be provided.The extender shall include an arm that places the shoulder belt D-loop in a closer,easier to reach location. The extenders shall be provided for the driver's seat,officer's seat,inboard driver's side rear wall, and inboard officer's side rear wall seat. Seating Capacity Tag A tag that is in view of the driver stating seating capacity of four(4) personnel shall be provided. MEDICAL CABINETS Medical Storage Cabinet Finish The medical storage cabinets shall have a Zolatone gray finish.The finish shall be applied to the interior,exterior,and shelves of the cabinet. Medical Storage Cabinets There shall be one (1) medical storage cabinet provided over the officer side wheel well and driver's side wheel well of the cab with interior and exterior access.The medical storage cabinets shall be constructed of 1/8" (.125") smooth aluminum plate. There shall be two (2) adjustable shelves provided in each medical storage cabinet.The shelves shall be constructed of 1/8" (.125") smooth aluminum plate. Each shelf shall have a 1" front and rear lip for strength and reinforcement.The shelves shall be sized to the interior dimensions of the medical storage cabinet. The medical storage cabinets shall be accessible externally of the cab by a locking double pan door and internally by a heavy-duty black nylon cargo netting. The exterior door shall be constructed using a box pan configuration.The outer door pan shall beveled and shall be constructed from 3/16" (0.188") aluminum plate. Inner door pan shall be constructed from 3/32" (0.090") smooth aluminum plate and shall have nutsert fittings to attach hold-open hardware.The inner pan shall have a 95-degree bend to form an integral drip rail. The exterior door shall have a 1"x 9/16" (1"x 0.43") closed-cell"P"EPDM sponge gasket meeting ASTM D-1066 2A4 standards installed around the perimeter of the door to provide a seal that is resistant to oil,sunlight,and ozone. 30 Confidential Proposal Specifications for the Elgin Fire Department A drain hole shall be installed in the lower corner of the inside door pan to assist with drainage. A polished stainless steel Hansen D-ring style twist-lock door handle with a#459 latch shall be provided on the door.The 4-1/2" (4.5") D-ring handle shall be mounted directly to the door latching mechanism with screws that do not penetrate the door material for improved corrosion resistance. The exterior door shall be securely attached to the apparatus cab with a full-length stainless steel 1/4" (0.25") rod piano-type hinge isolated from the cab and exterior door with a dielectric barrier. The door shall be attached with machine screws threaded into the door frame.The door shall have a gas shock-style hold-open device. An anodized aluminum drip rail shall be mounted over the compartment opening to assist in directing water run-off away from the compartment. Cover Plates A cover plate constructed of 1/8" smooth aluminum shall be provided for the exposed wiring in the medical cabinets.The cover plate finish shall match the medical cabinet interior. MAP BOX Map Box An aluminum map/storage box shall be installed in the cab.The map box shall be constructed of 1/8" (.125) smooth aluminum. Hinged drop-down doors with push-button latches shall be installed on the front of the box for access to two (2) storage areas. Each storage area shall have three (3) fixed shelves for storage of ring binders,map books,etc. Each latch shall have a 25 lb. rating. The map box shall be mounted on the vertical uprights in the center of the cab between the driver and officer seating positions (between the vertical 3X3 extrusions).The box shall be offset to the rear of the cab to provide maximum top of engine cover space and clearance for the engine inspection door. The map box shall be secured and tested to meet current NFPA requirements. Approximate dimensions: Divided storage area-34"W x 12.50"H x 12"D. Map Box Finish The map box shall have Zolatone gray finish. 31 Confidential Proposal Specifications for the Elgin Fire Department MISCELLANEOUS INTERIOR CAB OPTIONS Sun Visors Lexan sun visors shall be provided for the driver and officer matching the interior trim of the cab and shall be flush mounted into the underside of the overhead console. Engine Cover The engine cover shall blend in smoothly with the interior dash and flooring of the cab.The upper left and right sides shall have a sloped transition surface running front to rear providing increased space for the driver and officer. The engine cover and engine service access door cover shall be molded 181b/cu. ft. (+/-0.5) flexible integral skinned polyurethane foam at a Durometer of 60 (+/- 5.0) per ASTM F1957-99. The cover shall be approximately.5" thick with a minimum skin thickness of 0.0625 inches.The cover shall be provided to reduce the transmission of noise and heat from the engine.The cover shall be black and feature a pebble grain finish for slip resistance. Rear Engine Cover The rear engine cover shall be provided with a reduced profile for increased legroom on the forward-facing rear inboard seats. Rear Engine Cover Trim The rear portion of the engine cover shall have an overlay of aluminum diamond plate installed to provide additional wear resistance. Severe Duty Interior Walls The cab shall have severe duty interior panels in place of standard.Panels to be 1/8" (.125") aluminum smooth plate painted to match cab interior.Includes front and rear ceilings panels,back wall and side walls. Scuff Plate A brushed stainless steel scuff plate constructed of 14-gauge material shall be provided on the front wall of the driver side wheel well medical cabinet.The scuff plate shall protect the paint from the driver's seat. Cab Dash - Severe Duty The driver side and center dash shall be constructed from cast aluminum for durability and long life. 32 Confidential Proposal Specifications for the Elgin Fire Department The driver side cast aluminum dash shall enclose the instrument cluster. The center dash area shall be designed to mount electrical components like siren heads,directional bar controllers,radios,etc.The driver and officer sides shall be angled for ergonomic access and designed for either a color display or switches.Access panels shall be provided on the top, front and officer side for easy service access. The officer side dash shall be low profile and constructed from.125" smooth aluminum plate.A service access panel shall be provided in the top surface. The driver,center and officer side dash shall be painted to match the cab interior. The lower kick panels below the dash to be constructed from.125 aluminum plate painted to match the cab interior.The panels shall be removable to allow for servicing components that may be located behind the panels. Overhead Console An overhead console shall be provided in the front of the cab for the driver and officer.The areas in front of the driver and officer shall be removable panels that can be used for switches and other electrical items.The entire overhead console shall be hinged for service access. The overhead console shall be constructed of aluminum smooth plate painted to match the cab interior.The console shall be installed using stainless steel fasteners. Cab Insulation Package The cab shall be insulated to mitigate noise and ensure maximum cooling/heating capacity.The insulation package shall include 1" Polyester foam with Mylar facing for the front wall,rear wall, side walls,and ceiling,Reflectex (or equal) inside each cab door and 1" closed cell foam insulation below the front and rear facing seat risers. CAB ELECTRICAL OPTIONS Cab Interior Push-Button Style All push buttons on Officer dash are to the rubber covered "EXTERIOR" style buttons. Cab Dome Lights Four(4) ceiling mounted dome light assemblies shall be provided. Each light shall consist of a three-position assembly mounted rocker switch,LED (light emitting diode) 4"grommet mount white dome light,LED (light emitting diode) 4"grommet mount red dome light,and a plastic housing. 33 Confidential Proposal Specifications for the Elgin Fire Department The white light activates with appropriate cab door and light assembly mounted rocker switch,the red light activates with assembly mounted rocker switch only. Two (2) lights shall be located in both the front and rear of the cab. Horn Button Switch A three (3) position rocker switch shall be installed in the cab accessible to driver and properly labeled to enable operator to activate the OEM traffic horn,air hom or electronic siren from the steering wheel horn button. Cab Amp Gauge A shunted ammeter sized to the alternator capacity shall be provided in the cab and mounted visible to the driver.Ammeter shall range from 0 to 300 amps. English Dominant Gauge Cluster The cab operational instruments shall be located in the dashboard on the driver side of the cab and shall be clearly visible.The gauges in this panel shall be English dominant and shall be the following: • Speedometer/Odometer • Tachometer with integral hour meter • Engine oil pressure gauge with warning light and buzzer • Engine water temperature gauge with warning light and buzzer • Two (2) air pressure gauges with a warning light and buzzer(front air and rear air) • Fuel gauge • Voltmeter • Transmission oil temperature gauge This panel shall be backlit for increased visibility during day and nighttime operations. Speedometer for Officer An electronic speedometer shall be mounted on the passenger's side of the cab,mounted in the overhead console. Headlights The front of the cab shall have four (4) headlights.The headlights shall be mounted on the front of the cab in the upper position.The headlights shall be day time operational. LED Cab Headlights JW Speaker LED headlight Model 8800 Evolution 2 heated headlights shall be provided.LED lights shall be provided in the low and high beam position of the head lamp assembly. 34 Confidential Proposal Specifications for the Elgin Fire Department The heated versions of the Model 8800 Evolution 2 feature a thermally conductive grid system that will de-ice the lens up to twice as fast as other lights.This intelligent system reacts to temperature changes on a real-time basis with no action required by the driver. Battery Charger with Remote A Kussmaul Auto Charger 1200 battery charger with remote mounted bar graph display shall be installed. The battery charger shall be completely automatic with an output of 0-40 amp @ 12 volts DC and an input current requirement of 10 amps @ 120 volts AC. Battery Charger Location The battery charger shall be located up high in driver side wheel well medical cabinet offset forward. Auto-Eject Battery Charger Receptacle The battery charger receptacle shall be a Kussmaul 20-amp NEMA 5-20 Super Auto-Eject#091- 55-20-120 with a cover.The Super Auto-Eject receptacle shall be completely sealed and have an automatic power line disconnect. The receptacle shall be located outside driver's door next to handrail and the cover color shall be Red. A dual USB charging port with 2.1A total power for cell phones,chargers,etc. shall be installed officer side dash. The receptacles shall be wired battery hot. Battery Charger Wiring The battery charger shall be provided with cord connectors for future servicing in place of being hardwired. DPF Regeneration Override A momentary override switch shall be provided for the Diesel Particulate Filter(DPF) regeneration. The switch will inhibit the regeneration process until the switch is reset or the engine is shut down and restarted.The switch shall be located within reach of the driver. Cab Door Step Area Lighting There shall be eight(8) clear TecNiq Model D07 LED lights provided to illuminate the cab step well areas.Two (2)lights shall be located at each door area,one (1) above each step.The lights shall have polished stainless steel housings.The lights shall be activated by the cab door ajar circuit. 35 Confidential Proposal Specifications for the Elgin Fire Department Cab Turn Signals A pair of TecNiq LED (Light Emitting Diode) turn signal lights with clear lens shall be installed on the front of the cab.The strip type lights shall be 1.25" high x 15" long and be mounted in a polished cast aluminum housing between the quad bezels. BODY COMPARTMENT - LEFT SIDE Driver Side Assembly The driver side assembly shall be constructed entirely of aluminum extrusions and interlocking aluminum plates.This aluminum modular design shall provide a high strength-to-weight ratio for increased equipment carrying capacity. The driver side body corners shall be 6063-T5 extruded aluminum corner sections with a 3/16" (0.188")wall thickness.The side body extrusions shall be 6063-T5 aluminum tubing with a 3/16" (0.188") wall thickness and 3/16" (0.188") outside corner radius.The corners and sides shall be welded both internally and externally at each joint using an aluminum alloy welding wire. The driver side body shall be completely sanded and deburred to assure a smooth finish and painted job color. Driver Side Compartments The three (3) driver side compartments shall be constructed from 3003 H14 1/8" (.125'� smooth aluminum plate.The compartments shall be modular in design and shall not be a part of the body support structure. There shall be one (1) compartment located ahead of the rear wheels.This compartment shall be approximately 36"wide x 68" high x 26" deep in the lower 30" high section and 12"deep in the upper 38" high section.The compartment shall contain approximately 25.7 cu. ft. of combined storage space.The door opening shall be approximately 36"wide x 68" high. There shall be one (1) compartment located over the rear wheel.The compartment shall be approximately 56"wide x 34"high x 12"deep and contain approximately 13.2 cu. ft. of storage space.The door opening shall be approximately 56"wide x 34" high. There shall be one (1) compartment located behind of the rear wheels.This compartment shall be approximately 50"wide x 68"high x 26"deep in the lower 30" high section and 12" deep in the upper 38" high section.The compartment shall contain approximately 35.8 cu. ft. of combined storage space.The door opening shall be approximately 50"wide x 68" high. Each compartment seam shall be sealed using a permanent pliable silicone caulk.The walls of each compartment shall be machine-louvered for adequate ventilation. An externally-mounted compartment top shall be provided and constructed of a 1/8" (.125") aluminum treadplate. 36 Confidential Proposal Specifications for the Elgin Fire Department BODY COMPARTMENT - RIGHT SIDE Officer Side Assembly The officer side assembly shall be constructed entirely of aluminum extrusions and interlocking aluminum plates.This aluminum modular design shall provide a high strength-to-weight ratio for increased equipment carrying capacity. The officer side body corners shall be 6063-T5 extruded aluminum corner sections with a 3/16" (0.188")wall thickness.The side body extrusions shall be 6063-T5 aluminum tubing with a 3/16" (0.188'� wall thickness and 3/16" (0.188") outside corner radius.The comers and sides shall be welded both internally and externally at each joint using an aluminum alloy welding wire. The officer side body shall be completely sanded and deburred to assure a smooth finish and painted job color. Officer Side Compartments The three (3) officer side compartments shall be constructed from 3003 H14 1/8" (.125") smooth aluminum plate.The compartments shall be modular in design and shall not be a part of the body support structure. There shall be one (1) compartment located ahead of the rear wheels.This compartment shall be approximately 36"wide x 68" high x 26" deep in the lower 30" high section and 12"deep in the upper 38"high section.The compartment shall contain approximately 25.7 cu. ft. of combined storage space.The door opening shall be approximately 36"wide x 68"high. There shall be one (1) compartment located over the rear wheel.The compartment shall be approximately 56"wide x 34"high x 12"deep and contain approximately 13.2 cu. ft. of storage space.The door opening shall be approximately 56"wide x 34"high. There shall be one (1) compartment located behind of the rear wheels.This compartment shall be approximately 50"wide x 68"high x 26" deep in the lower 30"high section and 12"deep in the upper 38" high section.The compartment shall contain approximately 35.8 cu. ft. of combined storage space.The door opening shall be approximately 50"wide x 68"high. Each compartment seam shall be sealed using a permanent pliable silicone caulk.The walls of each compartment shall be machine-louvered for adequate ventilation. An externally-mounted compartment top shall be provided and constructed of a 1/8" (.125") aluminum treadplate. 37 Confidential Proposal Specifications for the Elgin Fire Department BODY COMPARTMENT - REAR Rear Body Compartment The rear body shall be constructed entirely of aluminum extrusions and interlocking aluminum plates and includes a lower full height center rear compartment. The rear body frame shall be 6063-T5 1.5"x 4"and 1.5"x 3"aluminum extrusions with a 3/16" (0.188") wall thickness and 3/16" (0.188") outside corner radius and 1/8" (0.125") aluminum plate. The rear extrusions shall be welded both internal and external at each joint using an aluminum alloy welding wire. Rear Body Compartment The rear compartment shall be constructed from 3003 H14 1/8" (.125") smooth aluminum plate. The compartment shall be modular in design and shall not be a part of the body support structure. The compartment shall be approximately 38"wide and shall vary in height and depth dependent upon water tank capacity and other options. The door opening shall be approximately 38"wide. This compartment shall be transverse through to the side rear compartments. The compartment seams shall be sealed using a permanent pliable silicone caulk.Machined louvers shall be provided for adequate ventilation. Tailboard Tailboard Step A tailboard step shall be provided at the rear of the body.The tailboard shall 10"in depth and in accordance with NFPA in both step height and stepping surface.The maximum rear step height to the tailboard shall not exceed 24". The tailboard step shall be formed from 3/16" (0.188") aluminum treadplate and shall be reinforced with 6063-T5 1.5"x 3"aluminum extrusion.The tailboard shall be in accordance with current NFPA requirements and shall include a multi-directional aggressive gripping surface incorporated into the diamond plate.The surface shall extend in a vertical direction from the diamond plate sheet a minimum of 1/8" (0.125"). Gripping surfaces shall be circular in design,a minimum of 1" diameter and on centers not to exceed 4". The tailboard step shall be bolted on to the body from the underside assuring a clear surface and shall be easily removable for replacement in the case of damage. Rear Access Handrails Handrails shall be provided at the rear of the body to assist ground personnel accessing the tailboard step and hosebed area. Each handrail shall be constructed of 6063T5 1.25"OD anodized aluminum tube,with an integral ribbed surface to assure a good grip for personnel safety,and shall be mounted between chrome stanchions. 38 Confidential Proposal Specifications for the Elgin Fire Department The handrails shall be located- two (2) handrails,one (1) on each side,appropriately sized handrail mounted vertical on the trailing edge of the body and appropriately sized handrail(s) mounted horizontal below the rear hosebed opening. DOORS Double Compartment Door One (1) double compartment doors shall be constructed using a box pan configuration.The outer door pans shall beveled and shall be constructed from 3/16" (0.188") aluminum plate.The inner door pans shall be constructed from 3/32" (0.090") smooth aluminum plate and shall have nutsert fittings to attach hold-open hardware.The inner pans shall have a 95-degree bend to form an integral drip rail. The compartment doors shall have a 1"x 9/16" (1"x 0.43") closed-cell"P"EPDM sponge gasket meeting ASTM D-1066 2A4 standards installed around the perimeter of the doors to provide a seal that is resistant to oil,sunlight,and ozone. A drain hole shall be installed in the lower corner of the inside door pan to assist with drainage. A polished stainless steel Hansen D-ring style twist-lock door handle a with#459 latch shall be provided on the primary door.The 4-1/2" (4.5") D-ring handle shall be mounted directly to the door latching mechanism with screws that do not penetrate the door material for improved corrosion resistance.The secondary door shall have a positive latching mechanism to hold the door in the closed position. The compartment doors shall be securely attached to the apparatus body with a full-length stainless steel 1/4" (0.25") rod piano-type hinge isolated from the body and compartment doors with a dielectric barrier.The doors shall be attached with machine screws threaded into the door frame. The doors shall have a gas shock-style hold-open device. An anodized aluminum drip rail shall be mounted over the compartment opening to assist in directing water runoff away from the compartment. The door(s) shall be installed in the following location: B1. Primary door with the D-ring latch shall be positioned to the driver side as installed so the first compartment door can be opened on the primary side which the rear discharge poisitioned to the officer side on rear also in use on scene. Painted Roll Up Compartment Doors A ROM brand roll up door painted job color shall be provided on the side body compartments. The door(s) shall be installed in the following locations:L1,L2,L3,R1,R2,and R3. The Robinson door slats shall be double wall box frame and manufactured from anodized aluminum.The slats shall have interlocking end shoes on each slat.The slats shall have interlocking 39 Confidential Proposal Specifications for the Elgin Fire Department joints with a PVC/vinyl inner seal to prevent any metal to metal contact and inhibit moisture and dust penetration. The track shall be painted aluminum with a finishing flange incorporated to provide a finished look around the perimeter of the door without additional trim or caulking.The track shall have a replaceable side seal to prevent water and dust from entering the compartment. The doors shall be counterbalanced for ease in operation.A full width latch bar shall be operable with one hand,even with heavy gloves. Securing method shall be a positive latch device. A magnetic type switch integral to the door shall be supplied for door ajar indication and compartment light activation. The door opening shall be reduced by 2"in width and approximately 8-9"in height depending on door height. Strap for Roll-Up Doors A bungee type strap shall be provided on the roll-up doors to assist in closing the door. The strap shall be affixed to both the door and the interior so the strap stays inside the compartment when lowering.The strap shall be provided on full height and high side (upper) compartments. Door D-Ring Latch All rear panel body storage compartments and tunnels with hinged doors greater than 1 sq. ft. shall have D-Ring latches in place of thumb latches to better facilitate loading and unloading of equipment. SHELVES Adjustable Shelves There shall be twelve (12) aluminum adjustable shelves provided for compartments as specified. The shelf shall be constructed of 3/16" (.187") smooth aluminum plate.The shelf shall have a minimum 2" front and rear lips to accommodate optional plastic interlocking compartment tile systems and shall be capable of holding 1001bs on compartments with tracks mounted on back wall(compartments up to appoximately 12" deep) or shall be capable of holding 250 lbs with tracks mounted on forward and rearward walls. The shelves shall be located in the following compartments: • L1 Lower(1) • L1 Upper(2) • L2 42"Long in rearward area of compartment(1) • L3 Lower(1) • L3 Upper(2) 40 Confidential Proposal Specifications for the Elgin Fire Department • B1 (1) • R1 Upper(2) • R3 Upper(2) The shelf shall be sized,width and depth,to match the size and location in the compartment. TRAYS / TOOLBOARDS Roll-Out Trays There shall be two (2) floor mounted roll-out trays provided in a compartment as specified. The roll-out tray shall be constructed of 3/16" (.187") smooth aluminum plate with a sanded finish and welded corners for increased strength and rigidity.The tray shall be sized in width and depth as applicable. For greater tray accessibility,the drawer slides shall feature one hundred percent extension.The tray shall utilize a gas spring to secure the tray in the open or closed position. The tray shall have a total capacity of 500 lbs. The roll-out trays shall be located in the following compartments: • L3 • B1 Runningboard Suction Trays A running board suction hose storage tray"floating style" shall be provided and located in the driver side running board and officer side running board. The tray shall be"floating style' mounted and constructed of 1/8" (.125") aluminum diamond plate (exterior)with a smooth sanded surface interior.The bottom of the tray shall have removable aluminum slats and drain holes to allow water drainage from hose stored in the tray.The tray shall have a 3" tapered front corner to protect tray againist debris.The tray shall be removable for the running board. Toolboard One (1) fixed wall mounted peg toolboard shall be provided in a compartment R2. The peg toolboard shall be constructed of 3/16" (.187) smooth aluminum plate with a sanded finish and shall be sized in height and width as applicable. The peg toolboard shall be spaced off the wall to allow easier mounting of tools and/or equipment. 41 Confidential Proposal Specifications for the Elgin Fire Department COVERS Hose Bed Cover A cover constructed of Black 18 oz. PVC vinyl coated polyester shall be installed over the apparatus hose bed.The base fabric shall be 1000 x 1300 Denier Polyester with a fabric count of 20 x 20 square inch. The front edge of the cover shall be mechanically attached to the body.The sides of the cover shall be held in place with nylon covered elastic synthetic rubber cord with stainless steel hooks spaced approximately 12"apart running the length of the hose bed.The rear of the cover shall have an integral flap that extends down to cover the rear of the hose bed.This flap shall be secured in place with heavy-duty nylon straps to comply with the latest edition of NFPA 1901. Crosslay Cover i A crosslay cover shall be provided for the crosslay storage area of the pump module.The crosslay cover shall be provided in compliance with NFPA. The crosslay cover shall be constructed from a minimum.125"aluminum treadplate.The crosslay cover shall include two (2) full-length stainless steel(0.25") rod piano-type hinges.The cover shall be hinged to open and not interfere with applicable plumbing components on the apparatus.The two (2) hinges shall provide a bi-fold application that shall allow an area of the crosslay to be accessible without completely opening the cover. The crosslay cover shall include applicable grab handles and two (2) hold downs to secure the cover in the closed position. Crosslay Cover Hinge The crosslay cover shall be hinged along the forward edge of the crosslay area. Crosslay Cover - Sides A pair of covers constructed of Black 18 oz.PVC vinyl coated polyester shall be installed over the side openings of the apparatus crosslay.The base fabric shall be 1000 x 1300 Denier Polyester with a fabric count of 20 x 20 per square inch. The side flaps shall be secured in place to comply with the latest edition of NFPA 1901 Running Board Tray Securing Straps A heavy-duty black nylon strap with a stainless steel quick-release buckle shall be provided for the running board hose trays.The strap shall be attached to the inboard side of the tray as low as practical to allow cinching of strap for securing tray contents and shall not reduce the overall tray capacity. 42 Confidential Proposal Specifications for the Elgin Fire Department Location: driver side running board and officer side running board. Hold Open Hold open devices shall be provided for the aluminum crosslay cover. PUMP MODULE Pump Module Width Pump module shall be 76"wide. Pump Module Height The pump module height shall be 75". Pump Module An aluminum extruded pump module shall be provided and located forward of the body.The pump module shall be provided with a forward area for a double crosslay and dunnage storage shall be provided. The pump module shall be constructed entirely of aluminum extrusions and interlocking aluminum plates.The pump module design and mounting shall be separate from the body to allow the pump module and body to move independently of each other in order to reduce stress from frame twisting and vibration.The exterior surface of the pump module shall have a sanded finish.The pump module panel opening shall be 51"in width. Crosslay Triple Preconnect Storage The upper pump module design shall include an area for a double stacked triple crosslay.The two (2) forward crosslay areas shall have a capacity of 400' of 1.75" double jacket hose.The rearward crosslay area shall have a capacity of 350' of 2.50"double jacket hose.The crosslay floor shall be constructed of 3/16" (.188) smooth aluminum plate and shall be slotted to prevent the accumulation of water and allow for ventilation of wet hose.Two (2) 1/4" (.25") smooth aluminum plate non-adjustable dividers with a sanded finish shall be provided to separate the three (3) hose storage areas. Dunage Pan A dunnage pan constructed of 3/16" (.188") aluminum treadplate shall be located rearward of the crosslays.The dunnage pan shall be sized to maximize available storage space. Pump Module Running Boards The pump module shall include a running board on each side of the pump module.The running boards shall be in accordance with NFPA in both step height and stepping surface.The maximum step height to each running board shall not exceed 24".The running boards shall be formed from 1/8" (.125") aluminum treadplate. Each running board shall include a multi-directional,aggressive 43 Confidential Proposal Specifications for the Elgin Fire Department gripping surface incorporated into the treadplate.The surface shall extend vertically from the diamond plate sheet a minimum of 1/8" (.125"). Gripping surfaces shall be circular in design,a minimum of 1" diameter and on centers not to exceed 4".Each running board shall be bolted on to the pump module and be easily removable for replacement in the case of damage. PUMP PANELS Side Mount Pump Panels The driver and officer side pump panels shall be constructed of 14-gauge stainless steel. Each panel shall have the ability to be removed from the module for easier access and for maintenance in the pump area. Pump Access Door The officer side pump module shall include an upper horizontal hinged pump access door. The door shall be constructed of 14 gauge brushed stainless steel.The compartment door shall be securely attached with a full-length stainless steel piano type hinge with 1/4" pins.The hinge shall be "staked" on every other knuckle to prevent the pin from sliding.The door shall include two (2) push-button style latches to secure the door in the closed position and two (2) hold-open devices to hold the door in the open position. Hinged Gauge Panel The driver side upper gauge panel shall be hinged to provide access to panel mounted electrical connections. The gauge panel shall be hinged to open upward with a full-length stainless steel piano type hinge with 1/4"pins.The hinge shall be"staked"on every other knuckle to prevent the pin from sliding. The gauge panel shall include latches to secure the panel in the closed position and two (2) mechanical/pneumatic (as applicable with the panel size) hold-opens for the open position. MISCELLANEOUS PUMP PANEL OPTIONS Pump Panel Tags Color coded pump panel labels shall be supplied to be in accordance with NFPA 1901 compliance. Mechanically Fastened Tags All tags installed on the exterior of the apparatus shall be mechanically fastened with stainless steel screws.These include but not limited to tags installed on the pump module,body,cab and bumper.Pump panel tags shall be mechanically fastened regardless whether panel is enclosed behind a door. 44 Confidential Proposal Specifications for the Elgin Fire Department OK To Pump Light Provide a .75"green light for"OK To Pump"LED light on the pump panel near the Pressure Governor. Air Outlet A 1/4" female air hose fitting shall be mounted with a 1/4"valve.The fitting and valve shall be connected to the air reservoir tank. Location: driver's side pump panel. PUMP MODULE OPTIONS Pump Compartment Heaters Two (2) 24,000 BTU heaters shall be installed in the lower pump compartment area.The heaters shall be connected to the chassis engine coolant system.The heaters shall include manual shut-off valve,electric shut-off valves, 12-volt blowers and controls at the pump operator's panel. Pump Module Crosslay Divider Notch The crosslay dividers shall be notched on both ends for the nozzle end storage with NFPA cover in the closed position. Roller Assemblies Stainless steel rollers with nylon guides set in aluminum extrusions shall be installed on the preconnect hose storage areas. The rollers shall assist with deployment of hose and to protect the module surface. Flex Joint The area between the pump modules and body shall include a rubber flex joint. Air Horn Switch A heavy-duty weatherproof push-button switch shall be installed at the pump operator's panel to operate the air horns. The switch shall be labeled"Evacuation Alert". Location: driver side pump panel. 45 Confidential Proposal Specifications for the Elgin Fire Department Crosslay Divider - Adjustable The cross lay dividers shall be adjustable (front to rear)in slots added to cross lay floor. WATER TANK 530 Gallon Tank A 530 gallon(U.S.) M" shaped booster tank shall be supplied.The booster tank shall be of a pinned baffle design.The booster tank shall be completely removable without disturbing or dismounting the apparatus body structure. The booster tank top,sides,and bottom shall be constructed of 1/2" (0.50") black UV-stabilized copolymer polypropylene.The copolymer polypropylene tank material shall be welded together utilizing thermoplastic welding technology.A clean hot air temperature controlled process, shall ensure that each weld reaches its plasticized state without cold or hot spots.The copolymer polypropylene material shall be used for its high strength and corrosion resistance for a prolonged tank life. The booster tank shall have a fill tower with a rearward hinged lid.The fill tower shall be located in the forward area of the tank and shall assist with tank ventilation.The fill tower shall include a removable 1/4" (0.25") thick polypropylene screen. The booster tank shall have two (2) tank plumbing openings. One (1) for a tank-to-pump suction line with an anti-swirl plate,and one (1) for a tank fill line.A 3"cleanout plug shall be shall be provided at the bottom of the tank sump. The booster tank shall include longitudinal and latitudinal baffles.The baffles shall be interlocking and thereto welded to the shell of the tank to minimize water surge during travel and provide enhanced road handling stability.The baffle design shall allow waterflow in accordance with NFPA during tank filling or pump operations. A 2.5' length of black flex hose shall be installed to the bottom of the tank. This shall direct the draining of overflow water past the rear axle and fuel tank,thus reducing the possibility of freeze- up of these components in cold environments. This drain configuration shall also assure that rear axle tire traction shall not be affected when moving forward. The booster tank shall undergo extensive testing prior to installation in the truck.The testing shall include an electronic spark and tank fill test after both the internal and external tank shell welds are completed. A lifetime manufacture's limited warranty shall be included. Tank capacity is 530 US gallons. 46 Confidential Proposal Specifications for the Elgin Fire Department Fill Tower Location Fill tower shall be located offset to officer side of water tank. TANK PLUMBING Tank Fill One (1) 2"pump-to-tank fill line having a 2"manually operated full flow valve.The valve control shall be located at the pump operator's panel and shall visually indicate the position of the valve at all times.The fill line shall be controlled using a chrome handle with an integral tag. The valve shall be an Akron 8800HD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position with water flowing through it. The valve shall be of unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. Tank To Pump One (1) manually operated 3"Akron valve shall be installed between the pump suction and the booster tank. Includes flex hose with stainless steel hose clamps for connection to the 4" tank sump outlet.The valve control shall be located at the pump operator's panel and shall visually indicate the position of the valve at all times. The valve shall be an Akron 8800HD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position and water is flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. A check valve shall be provided in the tank to pump supply line to prevent the possibility of"back filling" the water tank.The valve control shall be located at the pump operator's panel and shall visually indicate the position of the valve at all times. 47 Confidential Proposal Specifications for the Elgin Fire Department LADDER STORAGE / RACKS Hard Suction Hose Rack One (1) hard suction hose storage rack shall be provided on the driver side compartment top. The storage rack shall be constructed of anodized extruded aluminum and includes two (2) spring- mounted latch handles with stainless steel scuff plates.The scuff plates shall be located on the hose bed side to protect the painted surface. The storage rack shall be capable of storing one(1) 6" x 10' hard suction hose. Ladder Brand The ladder brand capable of being carried on the unit shall be Alco-Lite. Ladders The length of ladders capable of being stored shall be the following: 24'2-section and 14'roof ladder. Pike Pole The pike poles capable of being stored shall be the following length: four(4) 10'pike poles.The pike pole tubes to be labeled at the customer final inspection. Hose Bed Officer Side Tunnel Storage An officer side vertical storage tunnel shall be provided.The tunnel shall be for use with a low hose bed.Tunnel shall hold: 2-section 24', 14' roof, 10'attic,one (1) standard backboard and four(4) pike poles. The tunnel shall include a vertically hinged rear smooth plate door with a D-Ring latch. HANDRAILS / STEPS Hose Bed Folding Steps Innovative Controls dual lighted LED folding steps shall be positioned to the driver side rear of the body.The steps shall be NFPA compliant for access to the hose bed storage area and in step height and surface area.The steps shall be staggered stepped as applicable with tailboard depth,not applicable with recessed step mounting. Innovative Controls dual lighted folding step with LED lights integral to the step on the top to provide NFPA requirements of 2 fc (201x) on the stepping surface. Folding step shall also have a LED light integral to the bottom of the step to meet NFPA requirements of a stepping surface up to 18"below the step.The folding step shall sustain a minimum static load of 500 lb with a 3 to 1 safety factor.The folding step shall also meet NFPA slip resistance qualifications. Corrosion 48 Confidential Proposal Specifications for the Elgin Fire Department resistance shall be demonstrated by a 1000 hr salt spray test with no visible signs of deterioration of the step body or hardware. One (1) hand rail shall be installed (as applicable)in compliance with current NFPA.The hand rail shall be constructed of 6063T5 1.25" OD anodized aluminum tube,with an integral ribbed surface to assure a good grip for personnel safety,mounted between chrome stanchions. Hose Bed Folding Steps Innovative Controls dual lighted LED folding steps shall be positioned to the officer side rear of the body.The steps shall be NFPA compliant for access to the hose bed storage area and in step height and surface area.The steps shall be staggered stepped as applicable with tailboard depth,not applicable with recessed step mounting. Innovative Controls dual lighted LED folding step with LED lights integral to the step on the top to provide NFPA requirements of 2 fc(20 lx) on the stepping surface. Folding step shall also have a LED light integral to the bottom of the step to meet NFPA requirements of a stepping surface up to 18"below the step.The folding step shall sustain a minimum static load of 500 lb with a 3 to 1 safety factor.The folding step shall also meet NFPA slip resistance qualifications. Corrosion resistance shall be demonstrated by a 1000 hr salt spray test with no visible signs of deterioration of the step body or hardware. One (1) hand rail shall be installed (as applicable) in compliance with current NFPA.The hand rail shall be constructed of 6063T5 1.25"OD anodized aluminum tube,with an integral ribbed surface to assure a good grip for personnel safety,mounted between chrome stanchions. Intermediate Rear Step A 10" intermediate step below the hosebed shall be provided. The step shall be constructed of 3/16" (.187'� aluminum embossed treadplate. The step shall be bolted below the hosebed and be easily removable for replacement in the case of damage.The top rear surface of the step to have three (3) hand hold cut-outs horizontally. Folding Steps Innovative Controls dual lighted LED folding steps shall be located officer side front compartment face (4) and driver side front compartment face (4).The folding steps shall meet current NFPA in step height and surface area. Innovative Controls dual lighted LED folding step with LED lights integral to the step on the top to provide NFPA requirements of 2 fc (201x) on the stepping surface. Folding step shall also have a LED light integral to the bottom of the step to meet NFPA requirements of a stepping surface up to 18"below the step.The folding step shall sustain a minimum static load of 500 lb with a 3 to 1 safety factor.The folding step shall also meet NFPA slip resistance qualifications. Corrosion resistance shall be demonstrated by a 1000 hr salt spray test with no visible signs of deterioration of the step body or hardware. 49 Confidential Proposal Specifications for the Elgin Fire Department One (1) hand rail shall be installed in compliance with current NFPA.The hand rail shall be constructed of 6063T5 1.25"OD anodized aluminum tube,with an integral ribbed surface to assure a good grip for personnel safety,mounted between chrome stanchions. MISCELLANEOUS BODY OPTIONS Mud Flaps Black mud flaps with E-ONE logo'x shall be provided for the body wheel wells. Body Mainframe The body mainframe shall be entirely constructed of aluminum.The complete framework shall be constructed of 6061T6 and 6063T5 aluminum alloy extrusions welded together using 5356 aluminum alloy welding wire. The body mainframe shall include 3" x 3" 6061-T6 aluminum 3/8" (0.375")wall crossmember extrusion or 3" x 3" I-beam section aluminum extrusion depending on the application at the front of the body .A solid 3"x 3""I-beam" section aluminum extrusion shall be provided the full width of the body forward and rearward of the rear wheel well.The crossmembers shall be designed to support the compartment framing and shall be welded to 1-3/16"x 3" (1.188"x 3") solid 6063-T5 aluminum frame sill extrusions.The frame sill extrusions shall be shaped to contour with the chassis frame rails and shall be protected from contact with the chassis frame rails by 5/16"x 2" (0.31"x 2") fiber-reinforced rubber strips to prevent wear and galvanic corrosion caused when dissimilar metals come in contact. Body Mounting System The main body shall be attached to the chassis frame rails with six (6) of 5/8" (0.625") diameter steel U-bolts. This body mounting system shall be used to allow easy removal of the body for major repair or disassembly. Water Tank Mounting System The body design shall allow the booster tank to be completely removable without disturbing or dismounting the apparatus body structure.The water tank shall rest on top of a 3"x 3" frame assembly covered with rubber shock pads and corner braces formed from 3/16"angled plate to support the tank.The booster tank mounting system shall utilize a floating design to reduce stress from road travel and vibration.To maintain low vehicle center of gravity the water tank bottom shall be mounted within 5"of the frame rail top. Hosebed Side Assembly The hosebed side assemblies shall be made of 3"x 3"slotted aluminum extrusion and 3/16" (.188") smooth plate.The hosebed side assemblies shall provide a 85"high body. 50 Confidential Proposal Specifications for the Elgin Fire Department The exterior hosebed side surface shall be completely sanded and debarred to assure a smooth finish and painted job color.The interior hosebed side surface shall be completely sanded and deburred to assure a smooth sanded finish. Hose Bed The area above the booster tank shall have a hose storage area provided.The hose bed shall be constructed entirely from maintenance-free,3/4"deep x 7.5"wide,extruded aluminum slats that shall be pop-riveted into a one-piece grid system. Each slat shall have all sharp edges removed and have an anodized ribbed top surface that shall prevent the accumulation of water and allow for ventilation of wet hose. The hose bed design shall incorporate adjustable tracks in the forward area and the rearward area of the hose bed for the installation of an adjustable divider(s).The adjustable tracks shall hold an adjustable divider(s) mounting nut straight,so only a Philips head screwdriver is required to adjust a divider(s) from side to side (as is practical with other hose bed mounted equipment). The hose bed shall be easily removable to allow access to the booster tank below. Hose Bed Dividers There shall be two (2) hose bed dividers provided the full fore-aft length of the hose bed. The hose bed divider shall be constructed of 1/4" (0.25") smooth aluminum plate with an extruded aluminum base welded to the bottom.The rear end of the divider shall have a 3" radius corner to protect personnel.The divider shall be natural finish aluminum for long-lasting appearance and shall be sanded and de-burred to prevent damage to the hose. The dividers shall be adjustable from side to side in the hose bed to accommodate varying hose loads. Hose Bed Divider Hand Holds There shall be a hand hole cut-outs on the trailing edge of each hose bed divider.The cut-outs is specifically sized for use in adjusting of the hose bed divider. Divider Support Divider Support shall run full width of hosebed (side to side) at the front of the hosebed and towards the rear of the hosebed at top of the dividers.Attach to each hosebed divider to provide additional support. Storage Pan A storage pan shall be provided in the forward area of the hose bed. The storage pan shall be constructed of 3/16" (.188") aluminum tread plate. 51 Confidential Proposal Specifications for the Elgin Fire Department Fuel Fill A recessed fuel fill shall be provided at the driver side rear wheel well area. Stainless Steel Trim Rectangular stainless steel trim shall be located around the fuel fill opening.The trim shall provide added protection around fuel fill opening. Fill Tower Location The fill tower shall be located inside the hose bed storage pan as applicable. Rub Rail The pump area module and body shall have rub rails mounted along the sides and at the rear. The rub rail shall be C-channel in design and constructed of 3/16" thick 6463T6 anodized aluminum extrusion.The rub rail shall be 2.75" high x 1.25"deep and shall extend beyond the body width to protect compartment doors and the body side.The rub rail depth shall allow marker and/or warning lights to be recessed inside for protection. The top surface of the rub rail shall have minimum of five (5) raised serrations. Each serration being a minimum of.1"in height and with cross grooves to provide a slip-resistant edge for the tailboard step and pump module running board areas.The rub rail shall be mounted a minimum of 3/16"off the pump module and body with nylon spacers.The ends of each section shall be provided with a finished rounded corner piece. Angled Tailboard Corners The corners of the rear tailboard shall be angled inward for increased clearance around the rear of the apparatus. Compartment Partitions Removable partitions shall be provided to separate the two side lower rearward compartments from the lower center rear compartment. Body Wheel Well The body wheel well frame shall be constructed from 6063-T5 aluminum extrusion with a slot the full length to permit an internal fit of 3/16" (0.188") aluminum smooth plate supports.The outer body side wheel well plate shall be 3/16" (0.188") aluminum smooth plate welded flush with the body side and painted job color. The fenderettes shall be bolt-on and shall be easily removable.The fenderette shall be constructed from.080" aluminum with a mirror finish.The fenderette shall be 21/2" (2.5")wide x 21/4" 52 Confidential Proposal Specifications for the Elgin Fire Department (2.25") tall with a 26 7/8" (26.875") radius.A "P" shaped rubber gasket shall be provided between the fenderettes and wheel well body panel. The wheel well liners shall be constructed of a 3/16" (.187") composite material.The liners shall be bolt-on and shall provide a maintenance-free and damage-resistant surface. Additional Hosebed Horizontal Storage Pre-connect storage removable horizontal dividers above the hosebed. One divider to be 60 inches in length positioned above Lay 1 as identified in hose bed.Divider over Lay 2 to be 72 inches in length. Divider and tracks to be located in hose bed so that the trailing pan edge is inset from the end of the hose bed 4 inches as installed.Dividers to be mounted to adjustable full length aluminum angles on adjustable .188 extruded adjustable shelf tracks attached to Driver side hose bed wall and first and second full length divider in hose bed.Divider(s) to be fabricated from formed .25in thick smooth plate aluminum with DA finish with drainage slots to allow for water shed.All components to be thoroughly de-burred to minimize snagging on stored hose or personnel. Three sides of each formed divider shall be formed with a 2 inch bend upwards on both sides and the end deep into hose bed as installed to increase rigidity of the divider for hose weight and to prevent hose from sliding forward on pan deeper into hosebed during transit. Each formed divider to be equipped with a minimum length Pin(s) with lanyards through side mounting angles to prevent movement of divider in transit.Pins to be sized to just go through material without trailing excess that can snag hose during deployment.Divider trays when emptied of stored hose shall have a hand hold relief cut in each divider formed pan at the rearward end of the hose bed as installed for ease of removal once unloaded. Side angles with adjustable tracks shall be located on the divider(s) and side wall of hose bed as applicable to position the divider initially approximately 21 in. above the hose bed level with adjustment capabilities downward 3 inches and upwards 13 inches of travel to allow department to fit changing needs. Adjustable tracks to be positioned at the beginning,middle and end of each divider pan.Bottom and top edges of the adjustable tracks to be bevel cut and thoroughly de-burred to minimize snags.This to allow for 2 vertical stacked hose storage areas to accommodate hose lays below at bed level according to hose requirements and rolled and or hi rise packs to be stored above per departments requirements. SCBA BOTTLE STORAGE SCBA Bottle Storage Fire Shopp brand Two (2) SCBA bottles storage with hinged doors and push button latch shall be provided in the body wheel well area. The door shall have a brushed stainless steel finish. Location: driver's side rear wheel well offset forward and officer's side rear wheel well offset forward SCBA Straps Straps shall be provided in each exterior storage compartment to provide secondary means to hold each SCBA bottle in the compartment.The straps shall be constructed from 1" nylon webbing 53 Confidential Proposal Specifications for the Elgin Fire Department formed in a loop.The straps shall be mounted to the storage compartment ceiling directly inside the door opening at each bottle location. PUMP Pump Rating The fire pump shall be rated at 1500 GPM. Pump Certification The pump,when dry,shall be capable of taking suction and discharging water in accordance with current NFPA 1901.The pump shall be tested at the manufacturer's facility by an independent, third-party testing service.The conditions of the pump test shall be as outlined in current NFPA 1901. The tests shall include,at a minimum,the pump test,the pumping engine overload test,the pressure control system test,the priming device tests,the vacuum test,and the water tank to pump flow test as outlined in current NFPA 1901. A piping hydrostatic test shall be performed as outlined in current NFPA 1901. The pump shall deliver the percentage of rated capacities at pressures indicated below: • 100%of rated capacity at 150 psi net pump pressure 100%of rated capacity at 165 psi net pump pressure • 70%of rated capacity at 200 psi net pump pressure • 50%of rated capacity at 250 psi net pump pressure A test plate,installed at the pump panel,shall provide the rated discharges and pressures together with the speed of the engine as determined by the certification test,and the no-load governed speed of the engine. A Certificate of Inspection certifying performance of the pump and all related components shall be provided at time of delivery.Additional certification documents shall include,but not limited to, Certificate of Hydrostatic Test,Electrical System Performance Test,Manufacturer's Record of Pumper Construction,and Certificate of Pump Performance from the pump manufacturer. Fire Pump System The pump shall be a midship mounted Waterous CSU 1500-2250 single stage centrifugal pump. The pump shall be mounted on the chassis frame rails and shall be split-shaft driven. The entire pump body and related parts shall be of fine grain alloy cast iron,with a minimum tensile strength of 30,000 psi(207 (MPa).All metal moving parts in contact with water shall be of high quality bronze or stainless steel. Pump body shall be horizontally split in two (2) sections, for easy 54 Confidential Proposal Specifications for the Elgin Fire Department removal of impeller assembly including wear rings and bearings from beneath the pump without disturbing pump mounting or piping. The pump impeller shall be hard, fine grain bronze of the mixed flow design and shall be individually ground and hand balanced. Impeller clearance rings shall be bronze,easily renewable without replacing impeller or pump volute body,and of wrap-around double labyrinth design for maximum efficiency. The impeller shaft shall be stainless steel,accurately ground with a 2-3/4" diameter spline shaft,and shall be rigidly supported at each end by oil or grease-lubricated anti-friction ball bearings for rigid and precise support.Bearings shall be protected from water and sediment by suitable stuffing boxes, flinger rings,and oil seals.The remaining bearings shall be heavy-duty,deep groove ball bearings in the gearbox and shall be splash lubricated.Pump shaft must be sealed with double-lip oil seal to keep road dirt and water out of the gearbox. Two (2) 6"diameter suction ports with 6"NST male threads and removable screens shall be provided,one each side.The ports shall be mounted one on each side of the midship pump and shall extend through the side pump panels. Inlets shall come equipped with long handle chrome caps. Stuffing boxes shall be integral with the pump body and be equipped with two-piece glands to permit adjustment or replacement of packing without disturbing pump. Lantern rings shall be located at inner ends of stuffing boxes so that all rings of packing can be removed without removal of the lantern rings.Water shall be fed into stuffing box lantern rings for proper lubrication and cooling when pump is operating. Discharge Manifold The pump system shall utilize a stainless steel discharge manifold system that allows a direct flow of water to all discharge valves.The manifold and fabricated piping systems shall be constructed of a minimum of Schedule 10 stainless steel to reduce corrosion. Pump Shift The pump shift shall be pneumatically controlled using a power shifting cylinder. The power shift control valve shall be mounted in the cab,and be labeled"PUMP SHIFT".The apparatus transmission shift control shall be furnished with a positive lever,preventing accidental shifting of the chassis transmission. A green indicator light shall be located in the cab,and be labeled"PUMP ENGAGED".The light shall not activate until the pump shift has completed its full travel into pump engagement position. A second green indicator light shall be located in the cab and be labeled"OK TO PUMP".This light shall be energized when both the pump shift has been completed and the chassis automatic transmission has obtained converter lock-up (4th gear lock-up). 55 Confidential Proposal Specifications for the Elgin Fire Department Test Ports Two (2) test plugs shall be pump panel mounted for third party testing of vacuum and pressures of the pump. PUMP OPTIONS Electronic Speed Counter The test connection shall be installed on the pump panel to electronically verify the vehicle engine speed displayed on the electronic tachometer. Waterous Overheat Protection Manager A Waterous Overheat Protection Manager shall be provided and located at the pump operator's panel. The device shall consist of a valve that opens when the water in the pump reaches 140 degrees F and a warning light shall be triggered by a thermal switch when the water in the pump reaches 180 degrees F. The Overheat Protection Manager shall act as a safety device by releasing hot water from the discharge area of the pump to the ground or back to a water tank. Steamers The pump 6" steamer intakes shall be mounted approximately 1" from the pump panel to back of cap when installed.The "Flush+1" dimension can vary + or- 1-1/4" or as practicable depending on the pump module width and options selected. (Example 72" or 76" modules.) Location: driver's side and officer's side. Waterous Pump Anodes The anodes help prevent damage caused by galvanic corrosion within the pump.The system provides a sacrificial metal which helps to diminish or prevent pump and pump shaft galvanic corrosion. One (1) anode will be located on the suction side and one (1)will be located on the discharge side of the pump. Manual Pump Shift Override One (1) manual pump shift override shall be side panel mounted to engage the pump in the event of an air pressure failure.The pump shift shall be operated by a chrome handled push-pull cable. Mechanical Pump Seal A mechanical seal shall be supplied with the pump and shall include an alternate seal housing that shall be equipped with self-adjusting,maintenance-free,mechanical shaft seals which eliminates the need for packing. 56 Confidential Proposal Specifications for the Elgin Fire Department Master Drain Valve A manual master drain valve shall be installed on the pump panel.The master pump drain assembly shall consist of a Class 1 bronze master drain with a rubber disc seal.The master drain shall have a rubber seal to prevent water from running out on the running board. The manual master drain valve shall have twelve (12) individual-sealed ports that allow quick and simultaneous draining of multiple intake and discharge lines. It shall be constructed of corrosion- resistant material and be capable of operating at a pressure of up to 600 PSI. The master drain shall provide independent ports for low point drainage of the fire pump and auxiliary devices. Pump Cooler The pump shall have a 3/8"line installed from the pump discharge to the booster tank to allow a small amount of water to circulate through the pump casing in order to cool the pump during sustained periods of pump operation when water is not being discharged.The pump cooler line shall be controlled from the pump operator's panel by a Innovative Controls 1/4 turn valve with "T" handle.Each 1/4 turn handle grip shall feature built-in color-coding labels and a verbiage tag Priming System An electrically-driven Waterous priming pump shall be provided for the water pump.The pump shall be a rotary vane type that is oil-free. One (1) priming control,located at the pump operator's position,shall open the priming valve and start the priming motor.The priming valve shall be electronically interlocked to the"Park Brake" circuit to allow priming of the pump before the pump is placed in gear. INTAKES 2.5" Left Side Intake One (1) 2-1/2" suction inlet with a manually operated 2-1/2"Akron valve shall be provided on the left side pump panel. The valve shall be an Akron 8800HD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position and water is flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The outlet of the valve shall be connected to the suction side of the pump with the valve body located behind the pump panel.The valve shall come equipped with a brass inlet strainer,2-1/2" 57 Confidential Proposal Specifications for the Elgin Fire Department NST female chrome inlet swivel,and shall be equipped with a chrome plated rockerlug plug with a retainer device. The valve control shall be located at the pump operator's panel and shall visually indicate the position of the valve at all times. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance,and decreased friction loss. A 3/4"bleeder valve assembly will be installed on the left side pump panel. 2.5" Right Side Intake One (1) 2-1/2"gated suction inlet with a manual operated Akron valve shall be installed in the right side pump panel with the valve body behind the panel.The valve control shall be located at the intake and shall visually indicate the position of the valve at all times. The valve shall be an Akron 8800HD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position and water is flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The outlet of the valve shall be connected to the suction side of the pump with the valve body located behind the pump panel.The valve shall come equipped with a brass inlet strainer,2-1/2" NST female chrome inlet swivel and shall be equipped with a chrome plated rockerlug plug with a retainer device. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance,and decreased friction loss. A 3/4"bleeder valve assembly will be installed on the right side pump panel. Front Intake A 5" stainless steel pipe shall extend from the right suction side of the pump to the front of the apparatus.The intake pipe shall include a fixed 90-degree elbow above bumper when swivel option is not selected. All fabricated piping used in the front suction shall be constructed of a minimum of Schedule 10 stainless steel pipe to reduce corrosion of the lines. 3/4"valves shall be provided to allow water to be drained. Electric Actuated Valve A Waterous Monarch valve shall be provided for the specified intake.The inlet valve shall be operated by a 12 VDC electric motor with a remote switch provided at the pump operator's 58 Confidential Proposal Specifications for the Elgin Fire Department position.The 12 VDC motor shall be provided with an automatic resetting,thermally-compensated over-current protection circuit breaker to protect the 12 VDC motor and apparatus electrical system.The gear actuator on the valve will cycle from full closed to full open in not less than three (3) seconds.A manual override knob shall be provided at side pump panel. An indicator light panel shall be located at the pump operator's position to show valve open, closed,or traversing from open to closed. An adjustable pressure relief valve shall be provided.The pressure relief valve shall be factory set to 125 psi.The pressure relief valve shall provide overpressure protection for the suction hose even when the intake valve is closed. A 1/4" air bleeder valve shall be provided and controlled at the pump operator's position. A 3/4"water bleeder shall be supplied and controlled at the pump panel position. Location: 5 inch front intake. INTAKE OPTIONS Intake Relief Valve The pump shall be equipped with an Akron style 59 cast brass,variable-pressure-setting relief valve on the pump suction side. It shall be designed to operate at a maximum inlet pressure of 250 PSI. The relief valve shall be normally closed and shall be set to begin opening at 125 PSI in order to limit intake pressures in the pumping system.When the relief valve opens,the overflow water shall be directed through a plumbed outlet to discharge below the body in an area visible to the pump operator.The overflow outlet shall terminate with a male 2-1/2" NST threaded fitting to allow the overflow water to be directed away from the vehicle with a short hose (supplied by the fire department) during freezing weather or under other conditions where an accumulation of water around the apparatus might be hazardous. Front Intake Swivel A heavy-duty 6" 90 degree cast brass elbow designed and constructed specifically for fire/emergency vehicle usage shall serve as the auxiliary front suction inlet. The elbow,also referred to as the"swivel',shall be attached to the front suction piping. This component shall have the following features: 1) The ability to rotate 180 degrees. 2) A rugged twist-lock mechanism to hold the elbow in place at the desired position. 3) A double-ball race with bronze balls. 4) A 5" NPT free swivel female inlet. 59 Confidential Proposal Specifications for the Elgin Fire Department 5) A 6"NST male outlet with strainer. 6) Cast brass with polished chrome finish. • The elbow/swivel shall be mounted so that it extends above the extended front bumper. DISCHARGES AND PRECONNECTS 1.5" Crosslays Two (2) 1.5"crosslay discharges shall be provided at the front area of the body.The crosslay shall include one (1) 2"brass swivel with a 1-1/2" hose connection to permit the use of hose from either side of the apparatus. The crosslay hose bed shall consist of a 2" heavy-duty hose coming from the pump discharge manifold to the 2" swivel.The hose shall be connected to a manually operated 2"Akron valve.The valve shall be an Akron 880OHD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position with water flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The valve control shall be located at the pump operator's panel and shall visually indicate the position of the valve at all times. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. Location: crosslay 1 &2. 2.5" Crosslay One (1) 2.5" crosslay discharge shall be provided at the front area of the body.The crosslay shall have one(1) 2-1/2"mechanical swivel hose connection to permit the use of the hose from either side of the apparatus. The crosslay hose bed shall consist of a 2-1/2" heavy-duty hose coming from the pump discharge manifold to the 2-1/2" swivel.The hose shall be connected to a manually operated 2-1/2"Akron valve.The valve shall be an Akron B80OHD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position with water flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. 60 Confidential Proposal Specifications for the Elgin Fire Department The valve control shall be located at the pump operator's panel and shall visually indicate the position of the valve at all times. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. Location: crosslay 3. 2.5" Left Panel Discharges Two (2) 2-1/2" discharge outlet with a manually operated Akron valve shall be provided at the left hand side pump panel. The valve shall be an Akron 8800HD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position with water flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The valve control shall be located at the pump operator panel and shall visually indicate the position of the valve at all times. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. Location:left side discharge 1 and left side discharge 2. 2.5" Right Panel Discharge One (1) 2-1/2" discharge outlet with a manually operated Akron valve shall be provided at the right side pump panel. The valve shall be an Akron 8800HD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position with water flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The valve control shall be located at the pump operator panel and shall visually indicate the position of the valve at all times. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. 61 Confidential Proposal Specifications for the Elgin Fire Department Location: right side discharge 2. 2.5" Left Rear Discharge One (1) 2-1/2" discharge outlet with a manually operated Akron valve shall be supplied to the left rear of the apparatus by a 2-1/2" stainless steel pipe. The valve shall be an Akron 8800HD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position with water flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The valve control shall be located at the pump operator panel and shall visually indicate the position of the valve at all times. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. Location: left rear discharge. Right Side LDH Discharge One(1) 4" diameter discharge outlet with a handwheel controlled Akron valve shall be provided at the side pump panel. The valve shall be an Akron 8840HD series with a bronze flat ball design for ease of operation and increased abrasion resistance. The valve shall have a self-locking ball feature using an automatic friction lock design to balance the brass ball when in a throttle position and water is flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The handwheel valve control shall have the following features: •Handwheel driven worm gear rotates a gear sector for smoother and easier operation under pressure. •A 50:1 ratio. • 6"handwheel. • 12-1/2 turns for full open/close. •Opening and closing speed complies with the current edition of NFPA. •Portrait position indicator which shows the position of the valve ball to meet NFPA 1901. The valve controls and indicators shall be located at the pump operator's panel. 62 Confidential Proposal Specifications for the Elgin Fire Department Location: right side discharge 1. Rear LDH Discharge One (1) 4" diameter discharge outlet with a handwheel operated Akron valve shall be provided at the right side rear of the body. The discharge outlet shall include a 4"FNPT x 4"MNST adapter with 4"cap. The valve shall be an Akron 8840HD series with a bronze flat ball design for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the brass ball when in a throttle position and water is flowing through it. The valve shall be of the unique Akron Swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The handwheel valve control shall have the following features: • Handwheel driven worm gear rotates a gear sector for smoother and easier operation under pressure. •A 50:1 ratio • 6"handwheel • 12 1/2 turns for full open/close. • Opening and closing speed complies with the current edition of NFPA. •Portrait position indicator which shows the position of the valve ball to meet NFPA 1901. The valve control shall be located at the pump operator panel. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. Deck Gun Discharge One (1) 3" deck gun discharge outlet with a manually operated Akron valve and 3"stainless steel pipe shall be provided above the pump compartment. The valve shall be an Akron 8800HD series with a 316 stainless steel ball and dual polymer seats for ease of operation and increased abrasion resistance.The valve shall have a self-locking ball feature using an automatic friction lock design to balance the stainless steel ball when in a throttle position with water flowing through it. The valve shall be of the unique Akron swing-out design to allow the valve body to be removed for servicing without disassembling the plumbing. The valve shall be equipped with a device that limits the opening and closing speeds to comply with the current edition of NFPA 1901. 63 Confidential Proposal Specifications for the Elgin Fire Department The valve control shall be located at the pump operator's panel and shall visually indicate the position of the valve at all times. All fabricated piping shall be a minimum of Schedule 10 stainless steel for superior corrosion resistance and decreased friction loss. Deck Gun Location Deck gun piping shall be positioned dunnage pan centered.This location shall allow for optimal operation of a deck gun monitor once installed. DISCHARGE OPTIONS Extend-A-Gun A Task Force Tips 18"Extend-A-Gun piping shall be supplied for the deck gun discharge to allow for raising and lowering the deck gun monitor. The Extend-A-Gun shall include a raised monitor sensor connected to the door ajar light. Customer Provided Monitor The deck gun monitor shall be provided by the Elgin Fire Department. IC Push/Pull Control The apparatus pump panel shall be equipped with Innovative Controls Side Mount Valve Controls. The ergonomically designed'Aturn push-pull T-handle shall be chrome-plated zinc with recessed labels for color-coding and verbiage.An anodized aluminum control rod and housing shall, together with a stainless spring steel locking mechanism,eliminate valve drift.Teflon impregnated bronze bushings in both ends of the rod housing shall minimize rod deflection,never need lubrication,and ensure consistent long-term operation.The control assembly shall include a decorative chrome-plated zinc panel-mounting bezel with areas for color-coding and/or FOAM and CAFS identification labels. Bleeder Drain Valves The bleeder/drain valves shall be Innovative Controls 3/4"ball brass drain valves with a chrome- plated 1/4 turn handle.Each 1/4 turn handle grip shall feature built-in color-coding labels and a verbiage tag identifying each valve. Discharge/Intake Bezels Innovative Controls intake and/or discharge swing handle bezels shall be installed to the apparatus with mounting bolts.These bezel assemblies will be used to identify intake and/or discharge ports with color and verbiage.These bezels are designed and manufactured to withstand the specified 64 Confidential Proposal Specifications for the Elgin Fire Department apparatus service environment and shall be backed by a warranty equal to that of the exterior paint and finish.The specified assemblies feature a chrome-plated panel-mount bezel with durable UV resistant polycarbonate inserts.These UV resistant polycarbonate graphic inserts shall be sub- surface screen printed to eliminate the possibility of wear and protect the inks from fading.All insert labels shall be backed with 3M permanent adhesive (200MP),which meets UL969 and NFPA standards. PRESSURE GOVERNOR Pump Pressure Governor The apparatus shall be equipped with a Class 1 "TOTAL PRESSURE GOVERNOR" (TPG) Integrated pump control system.The TPG shall have a weatherproof color display.The TPG will operate as an engine/pump pressure governor/throttle system that is connected directly to the Electronic Control Module (ECM) mounted on the engine.The TPG is to operate as a pressure sensor(regulating) governor(PSG). The TPG shall display engine RPM, oil pressure,engine temperature and voltage along with providing critical warnings.The warning levels for oil pressure,high engine temperature,low voltage and high voltage shall be independently programmable. GAUGES Hourmeter A 2"weatherproof hourmeter shall be located on the pump operator's panel. Fuel Gauge A 2"weatherproof engine fuel gauge shall be pump panel mounted. Water Level Tank Gauge One (1) Innovative Controls brand water tank level gauge shall be located at the pump operator's panel to provide a high-visibility display of the water tank level.Ten (10) high-intensity light emitting diodes (LED's) on the display module shall have a 3-dimensional lens allowing the full, 3/4, 1/2, 1/4,and refill levels to be easily distinguished at a glance within full 180-degree visibility. The display module shall be protected from vibration and contamination with the components being encased in an encapsulated plastic housing.The long life and extreme durability of LED indicators eliminates light bulb replacement and maintenance. Color coded cover plates shall complete the assembly of the display module to the pump panel. Each display level can be set independently for maximum reliability. The display shall provide a steady indication of fluid level despite sloshing inside of the tank when the vehicle is in motion due to an"anti-slosh" feature. 65 Confidential Proposal Specifications for the Elgin Fire Department Discharge Gauges All discharges shall be provided with valve discharge gauges that shall be 2 '/2"diameter Innovative Controls pressure gauges. Each gauge shall have a rugged corrosion free stainless steel case and clear scratch resistant molded crystals with captive O-ring seals to ensure distortion free viewing and seal the gauge.The gauges shall be filled with a synthetic mixture to dampen shock and vibration,lubricate the internal mechanisms,prevent lens condensation and ensure proper operation from—40F to +160F. Each gauge shall exceed ANSI B40.1 Grade A requirements with an accuracy of+/- 1.5% full scale and include a size appropriate phosphorous bronze bourdon tube with a reinforced lap joint and large tube base to increase the tube life and gauge accuracy. A polished chrome-plated stainless steel bezel shall be provided to prevent corrosion and protect the lens and gauge case.The gauges shall be installed into decorative chrome-plated mounting bezels that incorporate valve-identifying verbiage and/or color labels.The gauges shall display a range from 0 to 400 psi with black graphics on a white background. Master Pressure Gauges The master intake and master discharge gauges shall be 4"diameter IC pressure gauges. Each gauge shall have a rugged corrosion free stainless steel case and clear scratch resistant molded crystals with captive O-ring seals to ensure distortion free viewing and seal the gauge.The gauges shall be filled with a synthetic mixture to dampen shock and vibration,lubricate the internal mechanisms,prevent lens condensation and ensure proper operation from—40F to +160F. Each gauge shall meet ANSI B40.1 Grade 1A requirements with an accuracy of+/- 1% full scale and include a size appropriate phosphorous bronze bourdon tube with a reinforced lap joint and large tube base to increase the tube life and gauge accuracy. The two master gauges shall be installed into decorative chrome-plated zinc mounting bezel that also incorporates a test port manifold and a graphic overlay that identifies the master intake and discharge gauges,the vacuum test port,and the pressure test port.The test port manifold is solid cast brass with chrome plated plugs. The master gauges shall be installed on the pump panel no more than 6 inches apart.The gauge on the left shall be the master pump intake gauge and display a range from 30"vac to 400 psi with black graphics on a white background.The gauge on the right shall be the master pump discharge gauge and display a range from 0 to 400 psi with black graphics on a white background. ELECTRICAL SYSTEMS Multiplex Electrical System Electrical System The apparatus shall incorporate a Weldon V-MUX multiplex 12-volt electrical system. The system shall have the capability of delivering multiple signals via a CAN bus.The electrical system installed by the apparatus manufacturer shall conform to current SAE standards,the latest FMVSS standards,and the requirements of the applicable NFPA 1901 standards. 66 Confidential Proposal Specifications for the Elgin Fire Department The electrical system shall be pre-wired for optional computer modem accessibility to allow service personnel to easily plug in a modem to allow remote diagnostics. The electrical circuits shall be provided with low voltage over-current protective devices. Such devices shall be accessible and located in required terminal connection locations or weather- resistant enclosures.The over-current protection shall be suitable for electrical equipment and shall be automatic reset type and meet SAE standards.All electrical equipment,switches,relays, terminals,and connectors shall have a direct current rating of 125 percent of maximum current for which the circuit is protected.The system shall have electro-magnetic interference suppression provided as required in applicable SAE standards. Any electrical junction or terminal boxes shall be weather-resistant and located away from water spray conditions. Multiplex System For superior system integrity,the networked multiplex system shall meet the following minimum component requirements: • The network system must be Peer to Peer technology based on RS485 protocol.No one module shall hold the programming for other modules. One or two modules on a network referred to as Peer to Peer,while the rest of the network consists of a one master and several slaves is not considered Peer to Peer for this application. • Modules shall be IP67 rated to handle the extreme operating environment found in the fire service industry. • All modules shall be solid state circuitry utilizing MOS-FET technology and utilize Deutsch series input/output connectors. • Each module that controls a device shall hold its own configuration program. • Each module should be able to function as a standalone module. No"add-on"module will be acceptable to achieve this form of operation. • Load shedding power management(8 levels). • Switch input capability for chassis functions. • Responsible for lighting device activation. • Self-contained diagnostic indicators. • Wire harness needed to interface electrical devices with multiplex modules. • The grounds from each device should return to main ground trunk in each sub harness by the use of ultrasonic splices. Wiring All harnessing,wiring and connectors shall be manufactured to the following standards/guidelines. No exceptions. • NFPA 1901-Standard for Automotive Fire Apparatus • SAE J1127 and J1127 • IPC/WHMA-A-620—Requirements and Acceptance for Cable and Wire Harness Assemblies. (Class 3—High Performance Electronic Products) 67 Confidential Proposal Specifications for the Elgin Fire Department All wiring shall be copper or copper alloys of a gauge rated to carry 125 of the maximum current for which the circuit is protected. Insulated wire and cable 8 gauge and smaller shall be SXL,GXL, or TXL per SAE J1128. Conductors 6 gauge and larger shall be SXL or SGT per SAE J1127. All wiring shall be colored coded and imprinted with the circuits function. Minimum height of imprinted characters shall not be less than .082"plus or minus .01".The imprinted characters shall repeat at a distance not greater than 3". A coil of wire shall be provided behind electrical appliances to allow them to be pulled away from mounting area for inspection and service work. Wiring Protection The overall covering of the conductors shall be loom or braid. Braid style wiring covers shall be constructed using a woven PVC-coated nylon multifilament braiding yam.The yarn shall have a diameter of no less than .04"and a tensile strength of 22 lbs. The yarn shall have a service temperature rating of-65 F to 194 F.The braid shall consist of 24 strands of yam with 21 black and 3 yellow.The yellow shall be oriented the same and be next to each other. Wiring loom shall be flame retardant black nylon.The loom shall have a service temperature of-40 F to 300 F and be secured to the wire bundle with adhesive-backed vinyl tape. Wiring Connectors All connectors shall be Deutsch series unless a different series of connector is needed to mate to a supplier's component.The connectors and terminals shall be assembled per the connector/terminal manufacturer's specification. Crimble/Solderless terminals shall be acceptable. Heat shrink style shall be utilized unless used within the confines of the cab. NFPA Required Testing of Electrical System The apparatus shall be electrical tested upon completion of the vehicle and prior to delivery.The electrical testing,certifications,and test results shall be submitted with delivery documentation per requirements of NFPA 1901.The following minimum testing shall be completed by the apparatus manufacturer: 1. Reserve capacity test: The engine shall be started and kept running until the engine and engine compartment temperatures are stabilized at normal operating temperatures and the battery system is fully charged.The engine shall be shut off and the minimum continuous electrical load shall be activated for ten (10) minutes. All electrical loads shall be turned off prior to attempting to restart the engine.The battery system shall then be capable of restarting the engine. Failure to restart the engine shall be considered a test fail. 68 Confidential Proposal Specifications for the Elgin Fire Department 2.Alternator performance test at idle: The minimum continuous electrical load shall be activated with the engine running at idle speed. The engine temperature shall be stabilized at normal operating temperature.The battery system shall be tested to detect the presence of battery discharge current.The detection of battery discharge current shall be considered a test failure. 3.Alternator performance test at full load: The total continuous electrical load shall be activated with the engine running up to the engine manufacturer's governed speed.The test duration shall be a minimum of two(2) hours.Activation of the load management system shall be permitted during this test. However,an alarm sounded by excessive battery discharge,as detected by the system required in NFPA 1901 Standard,or a system voltage of less than 11.7 volts DC for a 12 volt nominal system, for more than 120 seconds,shall be considered a test failure. 4. Low voltage alarm test: Following the completion of the above tests,the engine shall be shut off.The total continuous electrical load shall be activated and shall continue to be applied until the excessive battery discharge alarm activates.The battery voltage shall be measured at the battery terminals.With the load still applied,a reading of less than 11.7 volts DC for a 12 volt nominal system shall be considered a test failure.The battery system shall then be able to restart the engine. Failure to restart the engine shall be considered a test failure. NFPA Required Documentation The following documentation shall be provided on delivery of the apparatus: A. Documentation of the electrical system performance tests required above. B.A written load analysis,including: a.The nameplate rating of the alternator. b.The alternator rating under the conditions. c. Each specified component load. d. Individual intermittent loads. Vehicle Data Recorder A vehicle data recorder system shall be provided to comply with the 2009 and 2016 editions of NFPA 1901.The following data shall be monitored: • Vehicle speed MPH • Acceleration(from speedometer) MPH/Sec. • Deceleration (from speedometer) MPH/Sec. • Engine speed RPM • Engine throttle position%of full throttle 69 Confidential Proposal Specifications for the Elgin Fire Department • ABS Event On/Off • Seat occupied status Occupied Yes/No by position • Seat belt status Buckled Yes/No by position • Master Optical Warning Device Switch On/Off • Time: 24 hour time • Date:Year/Month/Day Occupant Detection System There shall be a visual and audible warning system installed in the cab that indicates the occupant buckle status of all cab seating positions that are designed to be occupied during vehicle movement. The audible warning shall activate when the vehicle's park brake is released and a seat position is not in a valid state.A valid state is defined as a seat that is unoccupied and the seat belt is unbuckled,or one that has the seat belt buckled after the seat has been occupied. The visual warning shall consist of a graphical representation of each cab seat in the multiplex display screen that will continuously indicate the validity of each seat position. The system shall include a seat sensor and safety belt latch switch for each cab seating position, audible alarm and braided wiring harness. Multiplex Display The V-MUX multiplex electrical system shall include a Vista IV color display. The display shall have the following features: • Aspect ratio of 16:9 (Wide Screen) • Diagonal measurement of no less than 7" • Master warning switch • Engine high idle switch • Five (5) tactile switches to access secondary menus • Eight(8) multi-function programmable tactile switches. • Specific door ajar indication • Real time clock • Provides access to the multiplex system diagnostics • Video capability for optional back-up camera(s) and GPS display The display shall be located driver's side engine cover. Electrical Connection Protection The vehicle electrical system shall be made more robust by the application of a corrosion inhibiting spray coating on all exposed electrical connections on the chassis and body. If equipped with an aerial device,the exposed connections on the aerial components shall also be protected. 70 Confidential Proposal Specifications for the Elgin Fire Department The coating shall use nanotechnology to penetrate at the molecular level into uneven surfaces to create a protective water repellant film.The coating shall protect electrical connections against the environmental conditions apparatus are commonly exposed to. Smart Truck Technology User Interface The apparatus shall be equipped with a smart truck technology system designed specifically for first responder apparatus.The system shall interconnect major apparatus CAN networks including but not limited to the chassis J1939/OBD2 data and vehicle multiplex system.The system shall securely report real-time vehicle information from these systems via cellular data to a globally supported cloud computing service for storage and real time access via web dashboards.The dashboard shall be accessible by the department's computers,tablets and smartphones. The system shall provide remote diagnostics of the VMUX or Es-Key vehicle multiplex system. By use of the web-based user interface,the system shall allow for over the air programming updates to the vehicle multiplex system should the need arise. The web-based user interface shall also provide the following: • J1939 chassis data including but not limited to fuel and DEF levels,battery voltage,coolant temperature and vehicle speed • GPS tracking providing run logs and reports • Pressure governor data(IPG,TPG+ and Sentry) • Easy access to truck specific documentation A truck down feature shall be provided on the web-based user interface to allow notification of needed apparatus service to both the authorized dealership and OEM via e-mail. The system shall be designed with an open architecture to incorporate future growth with new technology partners designed to enhance fireground operations Cummins Integration The smart truck technology installed on the apparatus shall be digitally interfaced with Cummins to provide a detailed report when a check engine light is displayed.The report shall provide fault code information including SPN and FMI numbers,time stamp,description of issue and suggested root cause.Alerts shall be able to be set up to receive the Cummins report via e-mail. Haas Alert The smart truck technology shall also feature seamless integration to the HAAS ALERT Safety Cloud providing Responder to Vehicle (R2V) alerts to motorists using navigation apps such as WAZE. 71 Confidential Proposal Specifications for the Elgin Fire Department Hardware Vehicle Gateway The vehicle gateway module shall be rugged in construction using a durable cast aluminum enclosure designed for emergency vehicle applications.The module shall have sealed Deutsch connectors providing four(4) CAN network ports,one (1) RS-485 port,one (1) Ethernet RJ45 port,embedded cellular modem,Bluetooth and GPS capability.The IoT Core Vehicle Gateway shall be capable of 2-way vehicle telemetry,supporting both remote diagnostics and remote over- the-air software updates. Antenna A low-profile cellular antenna shall be installed on the cab roof Data Plan A 5-year data plan shall be provided with the initial vehicle purchase.At the end of the 5-year period the department shall be given the option to extend service. LIGHT BARS Light Bar A Whelen Freedom IV Series 72"LED light bar Model F4X7 with sixteen(16) LED modules shall be provided;two (2) front corner mounted LED modules,twelve (12) forward facing LED modules and two (2) side facing LED modules (with front vista windows) or two (2) rear corner LED modules (without front vista windows). The light bar shall have clear lenses. The white LEDs shall be switched off in blocking right of way mode. The light bar shall be installed centered on the front cab roof. Light Bar Mounts One (1) pair of Whelen aluminum high mounts shall be provided on the front light bar. Front Light Bar Color The front light bar shall be provided with the following color LED modules: Red/White with clear lenses Light Bar Layout The forward light bar shall have a layout per customer specification. 72 Confidential Proposal Specifications for the Elgin Fire Department Light Bar LED Filters The Whelen Freedom IV light bar shall be provided with filters for all colored LEDs'.The filters shall cover each individual LED module. WARNING LIGHT PACKAGES Lower-Level Warning Light Package Eight(8)Whelen M6 Super LED light heads and two(2)Whelen M2R Super LED red light heads shall be provided. The lights shall include chrome flanges where applicable.The lights shall be wired with weatherproof connectors and shall be mounted as close to the corner points of the apparatus as is practical as follows: •Two (2)Whelen M6 (driver red,officer green) Super LED Red lights on the front of the apparatus facing forward •Two (2)Whelen M6R Super LED Red lights on the rear of the apparatus facing rearward •Two (2) lights each side of the apparatus,one (1)Whelen M6R Super LED Red each side at the forward most point(as practical),and one (1) Whelen M2R Super LED Red each side at the rearward most point(as practical). • One (1)Whelen M6R Super LED Red light each side of the apparatus centrally located to provide mid ship warning light. The side facing lights shall be located at forward most position,centered in rear wheel well,and side facing at rear of body in rubrail if equipped. All warning devices shall be surface mounted in compliance with NFPA standards. WARNING LIGHTS Preemption Emitter A Tomar strobe preemption emitter with chrome plated housing shall be installed.The emitter shall be controlled by a switch in cab accessible to driver and be wired to turn off when the park brake is applied. The emitter shall be located driver's side brow. Upper Rear Warning Lights Two (2)Whelen Model ROTA-BEAM Super LED beacons with Red domes shall be supplied. The lights shall be located one (1) each side of body on rearward compartment top to meet Zone C upper requirements. 73 Confidential Proposal Specifications for the Elgin Fire Department Warning Lights Whelen C-Series Model C6L Super LED light heads shall be provided. The lights shall be driver red,officer green,red with red lenses,red with red lenses. The rectangular lights shall include chrome flanges where applicable. Location: one (1) each side in front quad inboard of NFPA warning light (red driver's side,green officer's side),one (1) each side of cab down low just ahead of rear doors (red),and one (1) each side above tail lights (red). Hazard (Door Ajar) Light There shall be a TecNiq Model S38 red LED hazard (door ajar) light installed as specified. The light shall be located center overhead. DIRECTIONAL LIGHT BAR Directional Traffic Warning Light One (1) Whelen TAL65 LED 36"long Traffic Advisor with amber lenses shall be provided. The directional bar shall include a TACTL5 control head.The control head shall include a remote flash control and end lamp enable/disable feature. The light shall be installed at the rear of the body to direct traffic around the vehicle. Directional Light Bar Control Location The directional light bar control head shall be located in the driver side of center dash upper tier. SIRENS Electronic Siren A Whelen 295SLSAl electronic siren shall be installed in the cab.The siren amplifier and control panel module shall include a rotary selector for six (6) functions,on/off switch,push button switch for manual siren or air horn tones, and noise canceling microphone. Electronic Siren Control Location The electronic siren control shall be located in the center of center dash upper tier. 74 Confidential Proposal Specifications for the Elgin Fire Department EQ2B Electronic Siren A Federal Signal Model EQ2B solid state electronic siren with attached noise-canceling microphone shall be installed.The operating modes shall include Q Siren Wail,Q-Yelp,Q-Brake PA/Radio re- broadcast and digitally recorded air horn.The siren shall be operated from a control panel in cab. The unit shall include a single high power 200-watt 122 dB speaker system to achieve a sound output level that meets Class "A" requirements with square stainless steel"E-ONE" style grille. The speaker shall be located driver side front bumper. e-Q2B Siren Control Location The e-Q2B siren control shall be located in the center overhead. Push-Button Switch A heavy-duty metal push-button switch shall be installed on the officer's side switch panel to operate the EQ213 siren. SPEAKER Siren Speaker One (1) Federal Signal Model ES100 Dynamax 100-watt speaker shall be flush mounted as far forward and as low as possible on the front of the vehicle. A polished Model MSFMT with"E- ONE"grille shall be provided on the outside of the speaker to prevent road debris from entering the speaker. The speaker shall produce a minimum sound output of 120 dB at 10 feet to meet current NFPA 1901 requirements. The speaker shall be located officer side front bumper. DOT LIGHTING License Plate Light One (1) Truck-Lite Model 15905 white LED license plate light mounted in a Truck-Lite Model 15732 chrome plated plastic license plate housing shall be mounted at the rear of the body. LED Marker Lights LED clearance/marker lights shall be installed as specified. 75 Confidential Proposal Specifications for the Elgin Fire Department Upper Cab: • Included in front cab brow light. Lower Cab: • One (1) amber LED side turn/marker each side of cab ahead of the front door hinge. Upper Body: • One (1) red Trucklite LED clearance light each side,rear of body to the side. Lower Body: • Three (3) red Trucklite LED clearance lights centered at rear,recessed in the rub rail. • One (1) red Trucklite LED clearance light each side at the trailing edge of the apparatus body,recessed in the rub rail. • One (1) amber Trucklite LED clearance/auxiliary turn light each side front of body/module,recessed in the rub rail. Tail Lights Three (3)Whelen C6 series LED (Light Emitting Diode) lights shall be installed in a chrome ABS housing in a vertical position,each side at the rear of the body and wired with weatherproof connectors. Light functions shall be as follows: •LED red running light with red brake light in upper position. •LED populated amber arrow pattern turn signal in middle position. •LED clear back-up light in lower position. A one-piece chrome ABS trim housing shall be mounted around the three (3) individual lights in a vertical position. LIGHTS - COMPARTMENT, STEP & GROUND Medical Cabinet Lights One (1)Amdor Luma-Bar LED compartment light strip shall be mounted in each medical cabinet. The light shall be wired to the compartment light rocker switch in the cab. Compartment Light Package Two (2)Amdor Luma-Bar LED compartment light strips shall be mounted in each body compartment. 76 Confidential Proposal Specifications for the Elgin Fire Department Compartment lights shall be wired to a master on/off rocker switch on the cab switch panel. The wiring connection for the compartment lights shall be made with a weather-resistant plug in style connector.A single water and corrosion-resistant switch with a polycarbonate actuator and sealed contacts shall control each compartment light.The switch shall allow the light to illuminate if the compartment door is open. Ground Lights The apparatus shall be equipped with a sufficient quantity of lights to properly illuminate the ground areas around the apparatus in accordance with current NFPA requirements.The lights shall be EON LED (Light Emitting Diode) with clear lenses.The wiring connections shall be made with a weather resistant plug-in style connector. • One (1) ground light shall be supplied under each side of the front bumper extension (if equipped). • One (1) light shall be supplied to illuminate the ground below each cab door.Lights in areas under the driver and crew area exits shall be activated automatically when the exit doors are opened. • One (1) ground light shall be supplied under each side of the pump panel area (if equipped). • One (1) ground light shall be installed below each side body staircase (if equipped). • Three (3)ground lights shall be supplied under the rear of the apparatus. Ground area lights shall be switched from the cab dash with the work light switch. LIGHTS - DECK AND SCENE Deck/Scene Light Wired to Back-Up Lights The rear deck or scene lights shall be activated when the chassis is placed in reverse to provide additional lighting,in addition to the back-up lights,when backing the vehicle. Cab Scene Light Switching The cab scene lights shall be wired to activate through the appropriate side cab door ajar switch. This application allows the cab scene lights to be used as additional illumination of the ground area for personnel entering or exiting the vehicle.The switching for this application is in addition to the standard cab scene light switching. Hose Bed Lights Two (2) Federal Signal 64LEDSCENE LED lights with a clear lens shall be installed at the front area of the hose bed to provide hose bed lighting per current NFPA 1901.All electrical connectors are to be enclosed in the housing providing protection against the elements. The hose bed light shall be switched with work light switch in the cab. 77 Confidential Proposal Specifications for the Elgin Fire.Department Scene Lights Whelen Model C6SL SurfaceMax series Super LED clear scene lights shall be provided. Each shall have 6 Super LED diodes,a clear non optic hard coated polycarbonate lens and utilize a metalized SurfaceMax reflector with integrated optic collimators for maximum output.The C6SL shall have 1200 useable lumens. Lights shall be located one (1) each side rear compartment face up high and one (1) each side of cab,rearward of forward doors,up high and switched in cab (side facing lights switched separately). LED Crosslay Lights Two (2)TecNiq 12V LED Model P02-WWFP-1 lights with a bail mount shall be provided. The lightheads shall incorporate two (2) white LEDs'installed in a white die-cast powder coated aluminum housing.The light heads shall have 750 usable lumens each. The lights shall be located at the driver's and officer's side rear of the crosslay approximately 16" away from the exterior on top of the body. The light shall be operated by the work light switch in the cab. LIGHTS - NON-WARNING Light Wiring Forward pump panel light at the pump operator's panel shall be wired to the pump shift to provide pump panel illumination when the pump is placed into gear.Top mount application center light at the pump operator's panel shall be wired to the pump shift to provide pump panel illumination when the pump is placed into gear. Pump Panel Light Package Six (6) LED pump panel lights shall be provided.The lights shall be located three (3) each side under a light shield (as applicable with intermediate steps) directly above the left and right side pump panels.The lights shall be Tecniq EON with polished stainless steel housings.The light shields shall be formed from 14-gauge brushed finish stainless steel.The work light switch in the cab shall activate the lights when the park brake is set. Pump Panel Light An extra EON LED light shall be mounted under the light shield,in addition to the existing pump panel lights,directly above the pump panel.The light shall be switched with pump panel lights. Location: driver side pump panel 78 Confidential Proposal Specifications for the Elgin Fire Department Pump Compartment Light An LED light shall be provided in the pump compartment area for NFPA compliance.The light shall be an Optronics ILL22 Series that has a polycarbonate lease and sealed/waterproof housing. The light shall be wired through a switch inside the pump compartment access door/ panel. Engine Compartment Light There shall be lighting provided to illuminate the engine compartment area in compliance with NFPA 1901.The light shall be an Optronics ILL22 Series LED that has a polycarbonate lense,sealed /waterproof housing and integral switch.The light wiring circuit shall activate when the cab is tilted and master power is switched on. CONTROLS / SWITCHES Door Ajar Alarm An audible alarm shall be provided through,the multiplex display in the cab wired into the door ajar or indicator. Foot Switch A heavy-duty metal floor mounted foot switch shall be installed to operate the air horns. It shall be located driver's side. Foot Switches Two (2) heavy-duty metal floor mounted foot switches shall be installed to operate the electronic siren.They shall be located driver's side and officer's side. Additional Switch A 12-volt switch shall be provided. The switch shall be located pump operator's panel for pump panel lights. Three Way Switching Additional momentary switches with circuitry shall be provided to allow on/off operation of specified device from remote locations.The remote switch shall be mounted pump operator's panel for work lights,pump operator's panel for driver side 12-volt telescopic flood lights and pump operator's panel for officer side 12-volt telescopic flood lights. 79 Confidential Proposal Specifications for the Elgin Fire Department Programming Instructions Additional programming shall be provided.Additional programming shall be: driver side pump operator's panel rear light wired on through park brake and pump panel lights wired through pump panel switch only. CAMERA Camera Back-Up There shall be a Voyager camera provided mounted on the rear of the apparatus.The camera shall feature a wide-angle lens,IR LED assisted illumination for enhanced low-light performance,non- corrosive mounting bracket,and stainless steel hardware.The camera shall be interlocked with the chassis transmission.When the apparatus is placed in reverse the camera shall automatically be activated and when the transmission is placed in any other gear the screen shall return to the previously displayed screen. The camera shall have the following specifications: NTSC/PAL Video output signal format • 150'Viewing angle • Housing:Aluminum • Waterproof. IPX7 • Built-in microphone • Dimensions: 2.7"W x 1.7" H x 2.5" D The camera shall be located at the rear of the truck,up as high as possible. MISCELLANEOUS ELECTRICAL Trailer Hitch Pre-Wire Harness There shall be a pre-wire assembly provided for trailer hitch. Includes stop,left turn,right turn, marker and ground wires.Does not include connector. Trailer Wiring Connector The trailer wiring shall be terminated with a 7-pin connector.The connector shall be wired to the stop/turn/tail circuits only. Back-Up Alarm An electronic back-up alarm shall be supplied.The 97 dB alarm shall be wired into the chassis back- up lights to signal when the vehicle is in reverse gear. 80 Confidential Proposal Specifications for the Elgin Fire Department Additional Wiring Instructions Additional wiring instructions: Extend-A-Gun wire connector to be below channel/pan. LIGHTS - AREA Cab Brow Light One (1) FireTech 12-Volt LED Model FT-B-72-ML-W 75"white housing brow light with integral marker lights shall be provided.The light shall be installed on the front cab brow in place of the standard DOT marker lights. the light shall feature 54 LEDs' producing 19,665 usable lumens and five (5) DOT approved marker lights. . 12-Volt LED Flood Lights Two (2) Fire Research Evolution II Model FCA530-V20-SW-H side mount push up telescopic lights shall be installed with a switch provided accessible to the driver.The light pole shall be anodized aluminum and have a knurled twist lock mechanism to secure the extension pole in position.The extension pole shall rotate 360 degrees.The outer pole shall be a grooved aluminum extrusion and qualify as an NFPA compliant hand rail.The pole mounting brackets shall have a 3- 1/2" offset.Wiring shall extend from the pole bottom with a 4 ft. retractile cord. The lamp head shall have eight (8) ultra-bright white LEDs. It shall operate at 12/24 volts DC, draw 13/6.5 amps,and generate 20,000 lumens.The lamp head shall direct 50 percent of the light onto the action area while providing 50 percent to illuminate the working area.The lamp head angle of elevation shall be adjustable at a pivot in the mounting arm and the position locked with a round knurled locking knob.The lamp head shall incorporate heat-dissipating fins and be no more than 3- 5/16" high x 11-1/2" wide.The lamp head and mounting arm shall be powder coated white. The flood light shall be for fire service use. Fire Research Evolution-SW option raised pole hazard light switch for a 530 pole shall be installed. The magnetic switch shall be in a cylindrical housing clamped on the outer pole.A magnet shall be mounted in the extension pole.The switch contacts shall close when the pole is raised. Location: officer side back of cab and driver side back of cab. RECEPTACLE Receptacle A 20-amp, 110 volt 3-prong straight blade NEMA 5-20 duplex household receptacle with stainless steel cover plate shall be installed in a non-weather exposed area as specified by the department. The receptacle shall be wired to the inlet receptacle where it will have overcurrent protection from an external source. Location: rear wall of officer side medical compartment up high. 81 Confidential Proposal Specifications for the Elgin Fire Department MISCELLANEOUS ELECTRICAL Inverter Prewire 12 Volt wiring(positive and negative) shall be provided for dealer installed 1 KW inverter. Power cables shall also be provided from the breaker box (if applicable) to the inverter mounting location. All cables shall be tagged"Inverter". Location: L1. ELBOWS Chrome Elbows Four(4) 2-1/2" FNST x 2-1/2" MNST 45-degree chrome plated discharge elbow shall be supplied. ADAPTERS Storz Adapters Storz Swivel 4" FNST x 4"30 Degree Elbow Two (2) aluminum 4" female NST x 4"Storz swivel elbow adapters with a tethered cap shall be supplied. GROUND LADDERS Alco-Lite Roof Ladder One (1)Alco-Lite PRL-14, 14' aluminum roof ladder shall be provided. Folding steel roof hooks shall be attached to one end of the ladder with steel spikes on the other. Alco-Lite Extension Ladder One (1)Alco-Lite PEL-24,24' aluminum 2-section extension ladder shall be provided. The ladder shall meet or exceed the requirements of the current edition of NFPA 1931. Alco-Lite Attic Ladder One (1)Alco-Lite FL-10, 10' 6"long aluminum folding attic ladder with safety shoes shall be provided. 82 Confidential Proposal Specifications for the Elgin Fire Department MISCELLANEOUS LOOSE EQUIPMENT Wheel Chocks Two (2) Zico Model SAC-44-E folding wheel chocks for up to 44" diameter tires shall be supplied. DOT Required Drive Away Kit Three (3) triangular warning reflectors with carrying case shall be supplied to satisfy the DOT requirement. EXTERIOR PAINT Paint Custom Cab The apparatus cab shall be painted Sikkens FLNA 3042 E-ONE RED.The paint process shall meet or exceed current state regulations concerning paint operations.Pollution control shall include measures to protect the atmosphere,water,and soil. Contractor shall,upon demand,provide evidence that the manufacturing facility is in compliance with State EPA rules and regulations. The aluminum cab exterior shall have no mounted components prior to painting to assure full coverage of metal treatments and paint to the exterior surfaces. Cab doors and any hinged smooth- plate compartment doors shall be painted separately to assure proper paint coverage on cab,door jambs and door edges. Paint process shall feature Sikkens high solid LV products and be performed in the following steps: • Corrosion Prevention-all aluminum surfaces shall be pre-treated with the Alodine 5700 conversion coating to provide superior corrosion resistance and excellent adhesion of the base coat. • Sikkens Sealer/Primer LV-acrylic urethane sealer/primer shall be applied to guarantee excellent gloss hold-out,chip resistance and a uniform base color. • Sikkens High Solid LVBT650 (Base coat) -a lead-free,chromate-free high solid acrylic urethane base coat shall be applied,providing excellent coverage and durability.A minimum of two (2) coats shall be applied. • Sikkens High Solid LVBT650 (Clear coat) -high solid LV clear coat shall be applied as the final step in order to ensure full gloss and color retention and durability.A minimum of two (2) coats shall be applied. Any location where aluminum is penetrated after painting, for the purpose of mounting steps,hand rails,doors,lights,or other specified components shall be treated at the point of penetration with a corrosion inhibiting pre-treatment (ECK Corrosion Control).The pre-treatment shall be applied to the aluminum sheet metal or aluminum extrusions in all locations where the aluminum has been penetrated. All hardware used in mounting steps,hand rails,doors,lights,or other specified components shall be individually treated with the corrosion inhibiting pre-treatment. 83 Confidential Proposal Specifications for the Elgin Fire Department After the paint process is complete,the gloss rating of the unit shall be tested with a 20 degree gloss meter. Coating thickness shall be measured with a digital MIL gauge and the orange peel with a digital wave scan device. Paint Cab Two-Tone Color The upper section of the cab shall be painted FLNA 4095 E-ONE WHITE. The paint process of the secondary cab color shall be the same as the primary color. Paint Break with Dip to Grille The cab shall have a two-tone paint break.The break line shall be approximately 31.5 inches below the cab roof drip rail.The paint break shall include a dip down to the corners of the cab grille. Paint Body The apparatus body shall be painted Sikkens FLNA 3042 E-ONE RED.The paint process shall meet or exceed current state regulations concerning paint operations. Pollution control shall include measures to protect the atmosphere,water,and soil. Contractor shall,upon demand,provide evidence that the manufacturing facility is in compliance with State EPA rules and regulations. The aluminum body exterior shall have no mounted components prior to painting to assure full coverage of metal treatments and paint to the exterior surfaces of the body. Any vertically or horizontally hinged smooth-plate compartment doors shall be painted separately to assure proper paint coverage on body,door jambs and door edges. Paint process shall feature Sikkens high solid LV products and be performed in the following steps: • Corrosion Prevention-all aluminum surfaces shall be pre-treated with the Alodine 570.0 conversion coating to provide superior corrosion resistance and excellent adhesion of the base coat. • Sikkens Sealer/Primer LV-acrylic urethane sealer/primer shall be applied to guarantee excellent gloss hold-out,chip resistance and a uniform base color. • Sikkens High Solid LVBT650 (Base coat) -a lead-free,chromate-free high solid acrylic urethane base coat shall be applied,providing excellent coverage and durability.A minimum of two (2) coats shall be applied. • Sikkens High Solid LVBT650 (Clear coat) -high solid LV clear coat shall be applied as the final step in order to ensure full gloss and color retention and durability.A minimum of two (2) coats shall be applied. Any location where aluminum is penetrated after painting, for the purpose of mounting steps,hand rails,doors,lights,or other specified components shall be treated at the point of penetration with a corrosion inhibiting pre-treatment(ECK Corrosion Control).The pre-treatment shall be applied to the aluminum sheet metal or aluminum extrusions in all locations where the aluminum has been penetrated. All hardware used in mounting steps,hand rails,doors,lights,or other specified components shall be individually treated with the corrosion inhibiting pre-treatment. 84 Confidential Proposal Specifications for the Elgin Fire Department After the paint process is complete,the gloss rating of the unit shall be tested with a 20-degree gloss meter. Coating thickness shall be measured with a digital MIL gauge and the orange peel with a digital wave scan device. Paint Rear Body Rear body surface shall have a painted job color finish. Includes hinged doors that do not have discrete sales codes and removable panels. Painted Pump/Pre-Connect Modules The apparatus pump/pre-connect module shall be painted job color. The paint process shall match what is applied to the body. Paint Spray Out A paint sample spray out of the cab two-tone paint colors will be provided for approval prior to painting. Undercoating Undercoating shall consist of a heavy coating of soft seal film sprayed on the entire underside of the vehicle to repel water and road elements. Shall be applied after customer final inspection. Compartment Opening Trim Paint each body compartment lower door opening edge (1.5" top surface by 1.5" down outside face of extrusion by full width of opening)with Scorpion polyurethane coating. Color:Job Color. Compartment Opening Trim Paint each cab door opening at the rear vertical edges that is rolled back and over 1" on both sides with Scorpion polyurethane coating. Including behind each exterior handrail the same size as a scuff plate between the cab and handrail. Color:Job Color. INTERIOR PAINT Cab Interior Paint The interior of the cab shall be painted Zolatone gray#20-64. Prior to painting,all exposed interior metal surfaces shall be pretreated using a corrosion prevention system. 85 Confidential Proposal Specifications for the Elgin Fire Department PROTECTIVE COATINGS LINEA Package. One or more components installed on this unit shall have LINE-X coating.The LINE-X coating shall be XS-350,a two-component, 100% high performance aromatic polyurea spray elastomer system. XS-350 being an elastomeric protective coating shall provide excellent skin formation for chemical resistance and moisture protection. When used on walking surfaces,slip resistance shall meet or exceed NFPA 1901 test requirements. Color shall be Black unless otherwise specified. LINEA package for Pumper Body Includes the following as applicable 1. Body compartment tops 2. Coffin compartment tops including raised lip portion for lids 3. Exterior surface of coffin compartment lids 4. Body headboard upper plate work 5. Intermediate step/rear platform/landing surface 6. Enhanced extended box top and inboard side plates 7. Beavertails (all visible surfaces) 8. Tailboards including welded (exterior surface only),bolt on(exterior surface only) or flip down style (exterior and interior surfaces) 9. Rear bumper overlay 10. Bottom surface plates on 30-degree angled body LINEA package for Pumper Body Stepping Surfaces Includes the following as applicable 1. Intermediate step/rear platform 2. Landing surface area 3. Enhanced extended box top and inboard side plates 4. Beavertails (all visible surfaces) 5. Tailboards including welded(exterior surface only),bolt on(exterior surface only) or flip down style (exterior and interior surfaces) 6. Rear bumper overlay 7. Running Boards LINEA Package for Custom Cab Steps LINE-X package for custom cab steps: Includes cab step wells (everything below the cab floor) and all welded and bolt on steps including stirrup and swing out steps as applicable. Steps hanging below the cab shall have LINE-X coating inside and outside.DEF tank door or any other access doors are also included in this package if located in the step well area below the cab floor. 86 Confidential Proposal Specifications for the Elgin Fire Department Scorpion Bumper Top Perimeter The top perimeter of the formed heavy-duty bumper shall have Job Color Scorpion finish.The finish shall be applied to the top flange,radius and 1" down on the face of the heavy-duty bumper front,corners and sides. Scorpion Rear Cab Door Cabinet Scorpion Coat package: Medical Cabinets lower body surface shall have Scorpion coating. STRIPING Striping Reflective striping shall be provided and installed by the dealer. Reflective Stripe in Rubrail The reflective stripe in the body rubrail shall be black. Scotchlite Cab Stripe Scotchlite cab stripe shall be 3/4"in width. Stripe shall be centrally located and shall contour with the cab, following the paint break. Color of the stripe shall be as specified by the customer. Front Bumper Reflective Striping Chevron style Reflexite V98 striping shall be provided on the front bumper of the apparatus.The stripes shall consist of 6" Red/Fluorescent Yellow Green alternating stripes in an "A" pattern. Rear Body Reflective Striping Chevron style Reflexite V98 striping shall be provided on the rear of the apparatus.The stripes shall consist of 6" Red/Fluorescent Yellow Green alternating stripes in an"A" pattern.The striping shall be located on the rear facing extrusions,panels and doors inboard and outboard of the beavertails if applicable. Lettering The apparatus shall be lettered to match the existing Elgin Fire Department engines. Designated Standing / Walking Area Indication 1" wide yellow perimeter marking consisting of individual Reflexite diamonds shall be applied to indicate the outside edge of designated standing and walking areas above 48" from the ground in compliance with 2016 NFPA 1901. Steps,ladders and areas with a railing or structure at least 12" high are excluded from this requirement. 87 Confidential Proposal Specifications for the Elgin Fire Department WARRANTY / STANDARD & EXTENDED General 1 Year Warranty City of Elgin Fire Department shall receive a General One (1)Year or 24,000 Miles limited warranty in accordance with,and subject to,warranty certificate RFW0001.The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Body Structural (Aluminum) Warranty City of Elgin Fire Department shall receive a Body Structure Ten(10)Years or 100,000 Miles limited warranty in accordance with,and subject to,warranty certificate RFW0502.The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Plumbing and Piping Warranty City of Elgin Fire Department shall receive a Plumbing and Piping(Stainless Steel)Ten (10)Years or 100,000 Miles limited warranty in accordance with,and subject to,warranty certificate RFW0800. The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Meritor Front Axle Warranty A warranty shall be provided for the front axle by Meritor Automotive.The warranty period shall be as follows based on axle type: • FL-941,FL-943 and MFS up to 21,500: 5-year/ unlimited miles parts and labor • MFS rated at 22,800:2-year/ 200,000 miles parts and labor • Front drive axle: 2-year/ unlimited miles parts and labor Meritor Rear Axle Warranty A 5-year/unlimited miles,5-year parts and 5-year labor rear drive single or rear drive tandem axle warranty shall be provided by Meritor Automotive. Custom Chassis Warranty City of Elgin Fire Department shall receive a Custom Chassis One (1)Year or 18,000 Miles limited warranty in accordance with,and subject to,warranty certificate RFW0101.The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. 88 Confidential Proposal Specifications for the Elgin Fire Department Emissions Systems Warranty City of Elgin Fire Department shall receive a Regulated Emissions Systems Five (5) Years or 100,000 Miles limited warranty in accordance with,and subject to,warranty certificate RFW0140. The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Electrical Warranty City of Elgin Fire Department shall receive an Electrical One (1)Year or 18,000 Miles limited warranty in accordance with,and subject to,warranty certificate RFW0201.The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Frame Assembly Structural Warranty City of Elgin Fire Department shall receive a Frame Assembly Structural Twenty (20) Years or 100,000 Miles limited warranty in accordance with,and subject to,warranty certificate RFW0304. The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Cab Structural Warranty City of Elgin Fire Department shall receive a Cab Structure Ten (10)Years or 100,000 Miles limited warranty in accordance with,and subject to,warranty certificate RFW0602.The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Paint and Finish Warranty City of Elgin Fire Department shall receive a Paint and Finish Ten (10) Years limited warranty in accordance with,and subject to,warranty certificate RFW0710.The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Frame Rail Corrosion Warranty City of Elgin Fire Department shall receive a Frame Rail Corrosion (Zinc Plate and Powder Coat) Twenty Fire (25)Years or 150,000 miles limited warranty in accordance with,and subject to,warranty certificate RFW0316.The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. Frame Components Corrosion Warranty City of Elgin Fire Department shall receive a Frame Components Corrosion(Zinc Plate)Twenty (20)Years or 132,000 miles limited warranty in accordance with,and subject to,warranty certificate 89 Confidential Proposal Specifications for the Elgin Fire Department RFW0314.The warranty certificate is incorporated by reference into this proposal and included with this proposal or available upon request. SUPPORT, DELIVERY, INSPECTIONS AND MANUALS Pump Panel Approval Drawing A detailed large scale approval drawing of the pump panel(s) shall be provided.The drawing shall be provided on a purchased unit prior to the construction process. Approval Drawings A general arrangement drawing depicting the vehicles appearance shall be provided. The drawing shall consist of left side,right side, front,and rear elevation views. Vehicles requiring pump controls shall include a general arrangement view of the pump operator's position,scaled the same as the elevation views. Approval Drawings -Dash Panel Layout A detailed large scale approval drawing of the dash/console panel layout shall be provided.The drawing shall be provided on an purchased unit prior to the construction process. Electronic Manuals Two (2) copies of all operator,service,and parts manuals MUST be supplied at the time of delivery in digital format-NO EXCEPTIONS!The electronic manuals shall include the following information: • Operating Instructions,descriptions,specifications,and ratings of the cab,chassis,body, aerial(if applicable),installed components,and auxiliary systems. • Warnings and cautions pertaining to the operation and maintenance of the fire apparatus and firefighting systems. • Charts,tables,checklists,and illustrations relating to lubrication,cleaning,troubleshooting, diagnostics,and inspections. • Instructions regarding the frequency and procedure for recommended maintenance. • Maintenance instructions for the repair and replacement of installed components. • Parts listing with descriptions and illustrations for identification. • Warranty descriptions and coverage. The electronic document shall incorporate a navigation page with electronic links to the operator's manual,service manual,parts manual,and warranty information,as well as instructions on how to use the manual. Each copy shall include a table of contents with links to the specified documents or illustrations. 90 Confidential Proposal Specifications for the Elgin Fire Department The electronic document must be formatted in such a manner as to allow not only the printing of the entire manual,but to also the cutting,pasting,or copying of individual documents to other electronic media,such as electronic mail,memos,and the like. A find feature shall be included to allow for searches by text or by part number. These electronic manuals shall be accessible from any computer operating system capable of supporting portable document format(PDF). Permanent copies of all pertinent data shall be kept file at both the local dealership and at the manufacturer's location. NOTE: Engine overhaul,engine parts,transmission overhaul,and transmission parts manuals are not included. Fire Apparatus Safety Guide Fire Apparatus Safety Guide published by FAMA,latest edition. This safety manual is intended to point out some of the basic safety situations that may be encountered during the normal operation and maintenance of a fire apparatus and to suggest possible ways of dealing with these situations. This manual is NOT a substitute for the E-ONE's fire apparatus operator and maintenance manuals or commercial chassis manufacturer's operator and maintenance manuals. Factory Trips Two (2) Factory Trips to the E-ONE Manufacturing Facility located in Ocala,Florida shall be provided for four(4) members of the City of Elgin Fire Department as well as a representative of Fire Service,Inc. The factory trips shall be for the prebuild conference and the final inspection. Fire Service,Inc. shall incur all costs (excluding fire department labor costs) for the trips including air fare transportation,lodging and food.All transportation to the E-ONE Manufacturing Facility shall be via air transportation to minimize travel time for members of the City of Elgin Fire Department. Delivery The completed apparatus shall be delivered to the City of Elgin Fire Department under its own power. Prior to delivery,a Pre-Delivery Service shall be performed on the apparatus at the Fire Service,Inc. Service Facility in St.John,Indiana. FIRE SERVICE, INC. PROVIDED ITEMS Fire Extinguisher Storage One (1) fire extinguisher storage rack for two (2) fire extinguishers shall be provided in Compartment R3.This storage rack shall be located in the forward area of Compartment R3 and shall be installed at the body offset.The rack shall be designed to incorporate the storage of a CO2 91 Confidential Proposal Specifications for the Elgin Fire Department fire extinguisher with horn. Compartment matting shall be provided in the fire extinguisher storage slots. Compartment Matting This unit shall have all applicable compartment floors,shelves,trays,and EMS Cabinet shelves covered with a heavy-duty Turtle Tile or equivalent brand Black floor matting. Sigtronics Intercom System One (4) Sigtronics Model US-45S,4 Position,2 radio intercom system shall be provided and installed. The control module shall be located left of the center overhead console offset to the officer side of the apparatus. Four(4) interior ceiling mounted headset jack ports shall be provided and installed. Four(4) NFPA radio headset hangers shall be provided and installed. Two (2) PTT buttons shall be provided and installed in the front cab area—one each for officer and engineer. Motorola Radio Installation—Radio A Install one (1) Elgin Fire Department provided Motorola radio at center position overhead adjacent to the officer. Install a constant power source of 10A. Install an ignition power source of 30A. Motorola Radio Installation—Radio B Install one (1) Elgin Fire Department provided Motorola radio at right of center position overhead adjacent to the officer. Install a constant power source of 10A. Install an ignition power source of 30A. Motorola Radio Speakers Install two (2) Elgin Fire Department provided radio speakers one (1) to each radio overhead center cab/forward. 92 Confidential Proposal Specifications for the Elgin Fire Department Radio Antenna - A Install one (1)Antennae Plus AP-CG-Q-SII-WH radio antenna. Both coaxes to terminate at the officer dash computer cut out. Install constant power source of 20A to terminate at same location. Radio Antenna—B Install one (1)Antennae Plus AP-CCWG-Q-S2222-RP3-WH radio antenna. All four(4) coaxes with excess to terminate in a builder recommended location that will house a WiFi unit approx. 8"x 6"x 2". Install a constant power 7.5A power source to terminate in same location.Power source shall have a console mounted rocker switch to turn off power for rebooting of the Wi-Fi. Vanner Inverter A Vanner Bravo 2600-watt AC inverter shall be installed. The inverter shall produce 2600 watts continuous and 3 second 7150 watts surge.The unit shall include an internal transfer relay,low battery cut-off feature and include over-temperature and overload protection. A remote control on/off switch assembly shall be installed in the Generator compartment. Dimensions: 8.4"high x 17.5"wide x 14.0"deep Current Draw: Up to 260 amps 12-volt Exhaust Pipe Modification Install a Plymovent 4"Heavy Duty Conversion Kit(805516) with tail pipe adapter(to be completed at FSI). Install a Plymovent Grabber. ELGIN FIRE DEPARTMENT SUPPLIED EQUIPMENT Hard Suction Hose The Elgin Fire Department shall supply the hard suction hose for this apparatus. 93 Confidential Proposal Specifications for the Elgin Fire Department Fire Bell The Elgin Fire Department shall supply a fire bell to be mounted on the exterior of cab mounted on the officer's side. Intercom Headsets Four (4) Sigtronics Headsets shall be provided by the Elgin Fire Department. Sigtronics Radio Interface The Elgin Fire Department shall provide the two (2) radio interface module for the Sigtronics Headset Intercom System to be installed. Motorola Radio Installation— Radio A Install one (1) Elgin Fire Department provided Motorola radio at center position overhead adjacent to the officer. Install a constant power source of 10A. Install an ignition power source of 30A. Motorola Radio Installation— Radio B Install one (1) Elgin Fire Department provided Motorola radio at right of center position overhead adjacent to the officer. Install a constant power source of 10A. Install an ignition power source of 30A. Motorola Radio Speakers Install two (2) Elgin Fire Department provided radio speakers;one (1) to each radio overhead center cab/forward. 94 ATTACHMENT B WARRANTY I� Fire Apparatus One(1)Year or 24,000 Miles General Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of afire apparatus vehicle(the"Product") manufactured by OEM.As used herein,"Purchaser"means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Product shall be free from defects in material and workmanship,under normal use and Except as excluded in this certificate,this Limited Warranty covers Product parts,components,and maintenance,for the warranty period described below in this certificate.Also see the Section herein subsystems manufactured by OEM. Excluded from this Limited Warranty are(a)Third-Party Parts,as entitled"Specific Exclusions and Conditions"for more details regarding the parts and components defined below,and(b)those parts,components and subsystems manufactured by OEM which are covered by this Limited Warranty. subject to separate OEM limited warranties such as,but not limited to,the Product's chassis,engine emissions system,electrical system,multiplex electronic system,frame,aerial device,hydraulic system,body structure,cab structure,paint system,and plumbing system. If the Product is manufactured using a chassis provided by a Third-Party Parts manufacturer(i.e.a commercial chassis),this Limited Warranty shall not apply to the chassis. Instead,the Product's chassis will be covered by,and subject to,a separate limited warranty provided by that Third-Party Parts manufacturer. This Limited Warranty Coverage will Begin: The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. This Limited Warranty Coverage Ends After the First Occurrence of: One(1)Year or 24,000 Miles Who is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any General Exclusions and Conditions;What This Limited Warranty Does Not Cover: defect with the Product but in no event more than ten(10)days after discovery. The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third-Party repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts"),OEM does not warrant Third-Party Parts. Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations: No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TO THE PRODUCT. EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;6)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(I) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification.Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM'S LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0001-General-1Y-24K-2102 2102 Custom Chassis One(1)Year or 18,000 Miles Custom Chassis Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of a Custom Chassis(the"Product") manufactured by OEM for a fire apparatus vehicle(the"Apparatus").As used herein,"Purchaser"means that person or entity which purchases and commences first commercial use of the Apparatus for its Intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Product shall be free from defects in material and workmanship,under normal use and Except as excluded in this certificate,this Limited Warranty covers Product parts,components,and maintenance,for the warranty period described below in this certificate.Also see the Section herein subsystems manufactured by OEM.Parts,components and subsystems excluded from this Limited entitled"Specific Exclusions and Conditions"for more details regarding the parts and components Warranty include,but are not limited to:normal maintenance parts and activities such as lubrication, covered by this Limited Warranty. oil and filter replacement,belt adjustment,brake adjustment,door check strap adjustment,and vehicle alignments;parts subject to normal wear including,but not limited to,batteries,tires,brakes, belts,hoses,lights and bulbs,electrical accessories,voltage regulator,flashers,windshield wipers, etc.;frame and structure if altered by welding,cutting or splicing,or Improper drilling of rail flanges without OEM's prior written approval;any part,component,or subsystem not installed on the Product at the time it is shipped from OEM's factory;parts,components and subsystems subject to separate OEM limited warranties such as,but not limited to,the Apparatus's engine emissions system,electrical system,multiplex electronic system,frame,aerial device,hydraulic system,body structure,cab structure,paint system,or plumbing system. This Limited Warranty Coverage will Begin: The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. This Limited Warranty Coverage Ends After the First occurrence of: One(1)Year or 18,000 Miles Who Is Covered by this Umited Warranty:This Limited Warranty only applies to Purchaser and, unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service Is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any defect with the Product but in no event more than ten(10)days after discovery. General Exclusions and Conditions What This assemblies, Warranty Does Not Cover: The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third-Party repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts").OEM does not warrant Third-Parry Parts.Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations:No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM Is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for Its intended purpose;(a)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TO THE PRODUCT.EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;0)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(I) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification.Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future Issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM'S LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TOTHE PURCHASE PRICE OF THE PRODUCT. RFW0101-Custom Chassis-1Y-18K-2102 2102 Custom Fire Chassis Five(5)Years or 100,000 Miles #VA"ROUP Regulated Emissions Systems Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of a Custom Chassis(the"Product") manufactured by OEM for a fire apparatus vehicle(the"Apparatus").As used herein,"Purchaser"means that person or entity which purchases and commences first commercial use of the Apparatus for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Product shall be free from defects in material and workmanship,under normal use and This Limited Warranty only covers defects in material and workmanship that effect emissions maintenance,for the warranty period described below in this certificate.Also see the Section herein performance in the follow components of the Product: entitled"Specific Exclusions and Conditions"for more details regarding the parts and components Air Handling System and Associated Plumbing:Ambient Air Temperature Sensor;Charge Air Cooler covered by this Limited Warranty, and plumbing. Compressor Air System and Associated Plumbing:HC Doser Pressure Regulator/Protection Valve and plumbing to the HC Doser Engine harness circuits connected at both ends to emissions components. Exhaust gas piping from turbocharger out to the last aftertreatment device. Exhaust Aftertreatment: Urea Quality Sensor;Urea level sensor;Urea Tank and lines;Urea Tank/line heating elements or heat exchanger and pipe;Urea temperature sensors;Tank Heater Coolant Control Valve;Line Heater Control Relay Electronics:On Board Diagnostic(OBD)Malfunction Indicator Lamp(MIL);Diesel Exhaust Fluid(DEF) This Limited Warranty Coverage will Begin: Lamp;OBD Connector The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Air conditioning system leaks for 5 years or 100,000 miles Product invoice to the Purchaser,whichever comes first. The tires supplied with this vehicle are warranted to be free of emissions related defects for 2 years This Limited Warranty Coverage Ends After the First Occurrence of: or 24,000 miles. Five(5)Years or 100,000 Miles This limited warranty remains in effect so long as the vehicle emissions-related systems are properly Who is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, maintained in accordance with the operator manual(s)and as described in 40 CFR 1068.115. unless required by applicable law,may not be assigned or transferred to any other person or entity Parts,components and subsystems excluded from this Limited Warranty include,but are not limited without OEM's prior written authorization.This Limited Warranty is valid only in the country in which to,engine emissions related parts that are warranted by the engine manufacturer. the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the If the Product is manufactured using a chassis provided by a Third-Party Parts manufacturer(i.e.a Product,to obtain warranty repair authorization and service,and to make arrangements for the commercial chassis),this Limited Warranty shall not apply to the chassis. Instead,the Product's Product to be transported to an OEM-authorized service facility for warranty service.All warranty chassis will be covered by,and subject to,a separate limited warranty provided by that Third-Party service and towing must be authorized by an OEM customer service representative before any Parts manufacturer. warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any defect with the Product but in no event more than ten(10)days after discovery. General Exclusions and Conditions;What This limited Warranty Does Not Cover: The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third-Party repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts").OEM does not warrant Third-Party Parts.Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM's SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations: No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TO THE PRODUCT.EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;0)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(1) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification.Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM's LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0140-Regulated Emissions Systems-SY-3001K-2201 2201 Fire Apparatus One(1)Year or 18,000 Miles ,V Roup Electrical Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of afire apparatus vehicle manufactured by OEM (the"Apparatus").As used herein,"Purchaser"means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and conditions The Apparatus's electrical system(the"Product")shall be free from defects in material and This Limited Warranty only covers defects in the main wire harnesses and related circuit protection, workmanship,under normal use and maintenance,forthe warranty period described below in this connectors,routing,harness clamping,and wire protection of the Product.Parts,components and certificate.Also see the Section herein entitled"Specific Exclusions and Conditions"for more details subsystems excluded from this Limited Warranty include,but are not limited to,electronic devices, regarding the parts and components covered by this Limited Warranty. lighting,bulbs,sirens,radios,intercoms,ECUs,gauges,switches,occupant protection airbags and pyrotechnics,electronically controlled valves,pressure governors,foam system controls,ABS,ESC, solenoids,and relays. If the Product is manufactured using a chassis provided by a Third-Party Parts manufacturer(i.e.a commercial chassis),this Limited Warranty shall not apply to the chassis. Instead,the Product's chassis will be covered by,and subject to,a separate limited warranty provided by that Third-Party Parts manufacturer. This Limited Warranty Coverage will Begin: The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. This Limited Warranty Coverage Ends After the First Occurrence of: One(1)Year or 18,000 Miles Who is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any General Exclusions and Conditions;What This Limited Warranty Does Not Cover: defect with the Product but in no event more than ten(10)days after discovery. The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part'and collectively,the"Third-Party repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts").OEM does not warrant Third-Party Parts.Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations: No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM's SOLE AND EXCLUSIVE its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TO THE PRODUCT. EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;(j)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(1) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification. Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM'S LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0201-Electrical-1Y-18K-2103 2103 Custom Chassis Lifetime(50)Years or 250,000 Miles RiV6PDUP Frame Rail Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-ONE,Inc.("OEM")extends the following Limited Warranty to the Purchaser of afire apparatus vehicle manufactured by OEM(the"Apparatus").As used herein,"Purchaser"means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Custom Chassis'frame rail(the"Product")shall be free from defects in material and This Limited Warranty only covers breaking or cracking of factory installed frame rails. workmanship,under normal use and maintenance,for the warranty period described below in this certificate.Also see the Section herein entitled"Specific Exclusions and Conditions"for more details Parts,components and subsystems excluded from this Limited Warranty include,but are not regarding the parts and components covered by this Limited Warranty. limited to,parts with evidence of alterations,cutting,splicing,welding or drilling of rails or Ranges without the prior written authorization of the OEM;damage resulting from corrosion,including but not limited to,exposure to salt,deicing agents,acidic material,or other damaging chemicals or materials;any item that is bolted to the frame rail including the item attachment hardware(bolts, nuts,etc.);and paint,undercoating,or other surface treatments. This Limited Warranty Coverage will Begin: The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. This Limited warranty Coverage Ends After the First Occurrence of: Lifetime(50)Years or 250,000 Miles Who is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any defect with the Product but in no event more than ten(10)days after discovery. General Exclusions and Conditions;What This Limited Warranty Does Not Cover: The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis, Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials engine and emissions system,transmission,transfer case,axles,suspensions,water pumps, or workmanship during the warranty period stated above and covered by this Limited Warranty. monitors,valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third- Such repair or replacement may be performed at an OEM facility or by an OEM-authorized service Party Parts").OEM does not warrant Third-Party Parts. Defects in materials and workmanship facility.Any repaired or replaced Product shall be warranted only for the remainder of the warranty related to Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby period applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION assigns to Purchaser any assignable warranty applicable to the Third-Party Parts.The previous AND PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED sentence is OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) Third Party Representations: No person or entity is authorized to create any other warranty, misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive obligation or liability in connection with the Product,and OEM is not responsible for any or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other representation,promise or warranty made by any person,dealer,component manufacturer,vehicle than for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE at its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered, WARRANTY WITH RESPECT TO THE PRODUCT.EXCEPT FOR THE LIMITED WARRANTIES STATED IN or actual mileage or hours cannot be determined;0)improper maintenance or use including,but THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR not limited to,failure to follow the required or recommended maintenance schedules,failure to WARRANTIES WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY maintain operating parameters,and failure to follow operating instructions;(k)any Third-Party WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON- Parts;(I)additions or accessories not originally installed by OEM,including ancillary equipment used INFRINGEMENT,OR ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, in firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" ALL OF WHICH ARE EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND devices installed on the Product;(n)the repair or modification of any existing part,component or THE DESCRIPTION ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY subsystem originally installed by OEM without its prior express written authorization and any NOT BE DISCLAIMED UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE problems resulting from such repair or modification. Further,this Limited Warranty shall be null DURATION OF THE EXPRESS WARRANTY STATED IN THIS CERTIFICATE. and void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES OEM reserves the right to make changes to the Product without incurring any obligation to modify RELATING TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT or improve previously manufactured parts or products.Further,OEM may respond to or correct any LIMITATION,LOST REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME, issue or complaint for which it does not otherwise have responsibility under this Limited Warranty DIMINUTION IN VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF without becoming obligated to respond to or correct any future issue or complaint of a same or LODGING,VEHICLE RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER similar nature,and such response or correction shall not constitute an admission of warranty ECONOMIC LOSSES),WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE), coverage or impose any additional obligations on OEM. STRICT LIABILITY OR OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER,OEM's LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0305-Frame Rail-50Y-250K-2206 2206 Custom Chassis 422121�1 Twenty(20)Years or 132,000 Miles RNbpoup Frame Components Corrosion (Zinc Plate) Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of a fire apparatus vehicle manufactured by OEM (the"Apparatus").As used herein,"Purchaser'means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Custom Chassis'Zinc plated frame component system(the"Product")shall be free from This Limited Warranty only covers repair or replacement of the zinc plated front frame extension, corrosion perforation,under normal use and maintenance,for the warranty period described below frame crossmembers,battery brackets,and rear underbody supports if they are found to have in this certificate.Also see the Section herein entitled"Specific Exclusions and Conditions"for more corrosion perforation. details regarding the parts and components covered by this Limited Warranty. As used in this Limited Warranty,corrosion perforation is defined as an actual hole through the piping material caused by corrosion. Parts,components and subsystems excluded from this Limited Warranty include,but are not limited to,any frame component not zinc plated;parts,components and systems with evidence of alterations,cutting,splicing,welding or drilling of rails or flanges without the prior written authorization of the OEM; parts,components and subsystems where the Apparatus has been involved in an accident;and paint, This Limited Warranty Coverage will Begin: undercoating,or other surface treatments. The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. As a condition to maintaining this Limited Warranty,the Purchaser must have the Apparatus inspected annually by an authorized OEM representative for damage to surface coatings of the frame This Limited Warranty Coverage Ends After the First Occurrence of: including paint,plating,caulking and undercoating,and a written inspection report detailing the Twenty(20)Years or 132,000 Miles findings from each annual inspection must be forwarded to the OEM customer service department within 30 days of each inspection and any repairs.Failure to have damaged areas of the frame Who is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, immediately repaired may void this Limited Warranty. unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any General Exclusions and Conditions;What This Limited Warranty Does Not Cover: defect with the Product but in no event more than ten(10)days after discovery. The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third-Party repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts").OEM does not warrant Third-Party Parts. Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations: No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TOTHE PRODUCT. EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;0)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(1) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification.Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM'S LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0314-Frame Components Corrosion(Zinc Plate)-2DY-132K-2102 2102 Custom Chassis Twenty Five(25)Years or 150,000 Miles AmvtROue Frame Rail Corrosion(Zinc Plate and Powder Coat) Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of afire apparatus vehicle manufactured by OEM (the"Apparatus").As used herein,"Purchaser'means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Custom Chassis'Zinc plated and power coated chassis frame rail system(the"Product")shall be This Limited Warranty only covers repair or replacement of the zinc plated and powder coated frame free from corrosion perforation,under normal use and maintenance,for the warranty period rail system consisting of the frame rails,frame liners,or frame wrappers if they are found to have described below in this certificate.Also see the Section herein entitled"Specific Exclusions and corrosion perforation. Conditions"for more details regarding the parts and components covered by this Limited Warranty. As used in this Limited Warranty,corrosion perforation is defined as an actual hole through the piping material caused by corrosion. Parts,components and subsystems excluded from this Limited Warranty include,but are not limited to,any frame component not zinc plated;parts,components and systems with evidence of alterations,cutting,splicing,welding or drilling of rails or flanges without the prior written authorization of the OEM; parts,components and subsystems where the Apparatus has been involved in an accident;and paint, This Limited Warranty Coverage will Begin: undercoating,or other surface treatments. The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. As a condition to maintaining this Limited Warranty,the Purchaser must have the Apparatus inspected annually by an authorized OEM representative for damage to surface coatings of the frame This Limited Warranty Coverage Ends After the First Occurrence of: including paint,plating,caulking and undercoating,and a written inspection report detailing the Twenty Five(25)Years or 150,000 Miles findings from each annual inspection must be forwarded to the OEM customer service department within 30 days of each inspection and any repairs.Failure to have damaged areas of the frame Who Is Covered by this limited Warranty:This Limited Warranty only applies to Purchaser and, immediately repaired may void this Limited Warranty. unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any defect with the Product but in no event more than ten(10)days after discovery. General Exclusions and Conditions;What This Warranty Does Not Cover: The Product may incorporate subsystems,assemblies, parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third-Party repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts").OEM does not warrant Third-Party Parts.Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations: No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TO THE PRODUCT. EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;Q)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(1) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification. Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM'S LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0316-Frame Rail Corrosion(Zinc Plate and Powder Coat)-25Y-150K-2102 2102 Fire Apparatus Ten(10)Years or 100,000 Miles /�{l/tiROUP Body Structure(Aluminum) Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of afire apparatus vehicle manufactured by OEM (the"Apparatus").As used herein,"Purchaser"means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Apparatus's aluminum body structure system(the"Product")shall be free from defects in This Limited Warranty only covers defects in the material and workmanship of the aluminum body material and workmanship,under normal use and maintenance,for the warranty period described structural components of the Product.Parts,components and subsystems excluded from this Limited below in this certificate.Also see the Section herein entitled"Specific Exclusions and Conditions"for Warranty include,but are not limited to,the exterior coating,graphics,corrosion damage,electrical more details regarding the parts and components covered by this Limited Warranty. system,lighting,equipment mounting,shelves,trays,compartment doors,hinges,trim parts,body mounting brackets,vibration Isolators,fasteners or hardware. This Limited Warranty Coverage will Begin: The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. This Limited Warranty Coverage Ends After the First Occurrence of: Ten(10)Years or 100,000 Miles Who is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any General Exclusions and Conditions What This limited Warranty Does Not Cover: defect with the Product but in no event more than ten(10)days after discovery. The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third-Parry repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts").OEM does not warrant Third-Party Parts. Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations: No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TO THE PRODUCT. EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;6)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(1) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification.Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM'S LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFWOS02-Body Structure(Aluminum)-10Y-1001K-2102 2102 Fire Apparatus Ten(10)Years or 100,000 Miles Cab Structure(Aluminum) Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of afire apparatus vehicle manufactured by OEM (the"Apparatus").As used herein,"Purchaser'means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Apparatus's chassis aluminum cab structure system(the"Product")shall be free from defects in This Limited Warranty only covers defects in the material and workmanship of the welded or bonded material and workmanship,under normal use and maintenance,for the warranty period described aluminum cab structural aspects of the Product.Parts,components and subsystems excluded from below in this certificate.Also see the Section herein entitled"Specific Exclusions and Conditions"for this Limited Warranty include,but are not limited to,the exterior coating,corrosion damage, more details regarding the parts and components covered by this Limited Warranty. electrical system,equipment mounting,doors,door hardware,glass,HVAC,switches,instruments, controls,seats,occupant protection,trim parts,upholstery,lighting,mounting components, fasteners or hardware. This Limited Warranty Coverage will Begin: The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. This Limited Warranty Coverage Ends After the First Occurrence of: Ten(10)Years or 100,000 Miles Who Is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any defect with the Product but in no event more than ten(10)days after discovery. General Exclusions and rate subsystems, What This Limited Warranty Does Not Cover: The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third-Party repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts").OEM does not warrant Third-Party Parts.Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations: No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TO THE PRODUCT. EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;(j)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(1) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification. Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM's LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0602-Cab Structure(Aluminum)-SOY-100K-2102 2102 Fire Apparatus 421D� Ten(10)Years RrVtiRWR Paint and Finish(Exterior Clear coated) Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of afire apparatus vehicle manufactured by OEM(the Apparatus").As used herein,"Purchaser'means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Apparatus's OEM-applied exterior coating and finishing system(the"Product")shall be free This Limited Warranty only covers defects in the following aspects of the Product: from the paint system adhesion defects listed in the Section herein entitled"Specific Exclusions and A.Loss of adhesion of the Product resulting in rusting less than Rust Grade 5 as in ASTM D 610-08. Conditions",under normal use and maintenance,for the warranty period described in this B.Cracking of the Paint System as set forth in ASTM D 661-93. certificate. C.Excessive loss of gloss caused by cracking,checking,and hazing. Limited Warranty coverage schedule: D.Scab corrosion,and corrosion under the paint film,where the point of origin is not:(a)A breach Basecoat/Clear Coat Corrosion of the coating that occurred because of damage to the paint system,(b)Corrosion originating from 0-120 Months: 1001/ 0-24 Months or 100,000 Miles: 100% a crevice,or(c)Dissimilar metals 25-48 Months or 100,000 Miles: 50% E.Chemical Resistance meet ASTM D1308 standards 25 MEK double rubs. If the Product is manufactured using a chassis provided by a Third-Party Parts manufacturer(i.e.a F.Stone Chip SAE J400 Method A-4B or above. commercial chassis),this Limited Warranty shall not apply to the chassis.Instead,the Product's Damage or Defects excluded from this Limited Warranty include,but are not limited to: chassis will be covered by,and subject to,a separate limited warranty provided by that Third-Party 1.Use of cleaning products not prescribed in the apparatus operator manual(s). Parts manufacturer.In addition,also see the Section herein entitled"Specific Exclusions and 2.Exposure to corrosive agents,acid rain,chemical fallout. This Limited Warranty Coverage will Begin: 3.Heavy-duty pressure washing or aggressive mechanical wash systems. 4.Paint deterioration caused by abuse,accidents,scratches,chips,or bruises. The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the S.Paint or coatings on the vehicle's undercarriage,interior,or aerial structure. Product invoice to the Purchaser,whichever comes first. 6.Applied or painted graphics,reflective material or gold leaf. This Limited Warranty Coverage Ends After the First Occurrence of: 7.Paints or coatings of supplier parts including roller shutter doors. Ten(10)Years 8.Mechanical abrasion or external foreign object damage. 9.Application of,or removal of,stickers or decals including replacement. 10.Body compartment interior coatings,undercarriage and frame. 11.Defects resulting from or inherent to application such as runs,orange peel,and fisheyes. Who Is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, 12.Defects caused by acid rain and industrial fallout. unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any defect with the Product but in no event more than ten(10)days after discovery. General Exclusions and Conditions;What This Limited Warranty Does Not Cover: The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis, Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials engine and emissions system,transmission,transfer case,axles,suspensions,water pumps, or workmanship during the warranty period stated above and covered by this Limited Warranty. monitors,valves,foam systems,aerial devices(each,a"Third-Party Part'and collectively,the"Third- Such repair or replacement may be performed at an OEM facility or by an OEM-authorized service Party Parts").OEM does not warrant Third-Party Parts.Defects in materials and workmanship facility.Any repaired or replaced Product shall be warranted only for the remainder of the warranty related to Third-Party Parts that carry their own warranty are subject to that warranty.OEM hereby period applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION assigns to Purchaser any assignable warranty applicable to the Third-Party Parts.The previous AND PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED sentence is OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) Third Party Representations: No person or entity is authorized to create any other warranty, misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive obligation or liability in connection with the Product,and OEM is not responsible for any or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other representation,promise or warranty made by any person,dealer,component manufacturer,vehicle than for its intended purpose; a collision,fire,theft,vandalism;p p ( ) (f)weather,freezing,flooding,acts manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE at its request;(i)when the odometer or hour meter is disconnected,or its reading has been altered, WARRANTY WITH RESPECT TO THE PRODUCT. EXCEPT FOR THE LIMITED WARRANTIES STATED IN or actual mileage or hours cannot be determined;(j)improper maintenance or use including,but THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR not limited to,failure to follow the required or recommended maintenance schedules,failure to WARRANTIES WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY maintain operating parameters,and failure to follow operating instructions;(k)any Third-Party WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NOW Parts;(1)additions or accessories not originally installed by OEM,including ancillary equipment used INFRINGEMENT,OR ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, in firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" ALL OF WHICH ARE EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND devices installed on the Product;(n)the repair or modification of any existing part,component or THE DESCRIPTION ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY subsystem originally installed by OEM without its prior express written authorization and any NOT BE DISCLAIMED UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE problems resulting from such repair or modification. Further,this Limited Warranty shall be null DURATION OF THE EXPRESS WARRANTY STATED IN THIS CERTIFICATE. and void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES OEM reserves the right to make changes to the Product without incurring any obligation to modify RELATING TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT or improve previously manufactured parts or products.Further,OEM may respond to or correct any LIMITATION,LOST REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME, issue or complaint for which it does not otherwise have responsibility under this Limited Warranty DIMINUTION IN VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF without becoming obligated to respond to or correct any future issue or complaint of a same or LODGING,VEHICLE RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER similar nature,and such response or correction shall not constitute an admission of warranty ECONOMIC LOSSES),WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE), coverage or impose any additional obligations on OEM. STRICT LIABILITY OR OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER,OEM'S LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0710-Paint and Finish(Exterior Clear coated)-10Y-2104 2104 Fire Apparatus Ten(10)Years or 100,000 Miles Plumbing and Piping(Stainless Steel) Limited Warranty Subject to the provisions,limitations,and exclusions set forth in this certificate,E-one,Inc.("OEM")extends the following Limited Warranty to the Purchaser of a fire apparatus vehicle manufactured by OEM (the Apparatus").As used herein,"Purchaser'means that person or entity which purchases and commences first commercial use of the Product for its intended purpose. This Limited Warranty Covers: Specific Exclusions and Conditions The Apparatus's stainless steel fire suppression plumbing and piping system(the"Product")shall be This Limited Warranty only covers defects in the material and workmanship of the stainless steel fire free from defects in material and workmanship,under normal use and maintenance,for the warranty suppression pipes and associated joints for intake and discharge lines of the Product.Parts, period described below in this certificate.Also see the Section herein entitled"Specific Exclusions components and subsystems excluded from this Limited Warranty include,but are not limited to,the and Conditions"for more details regarding the parts and components covered by this Limited exterior coatings,electrical system,pump and pump accessories,valves,monitors,light towers, Warranty. generators,gauges,hoses,trim parts,fasteners or hardware. This Limited Warranty Coverage will Begin: The date the Product is placed into service by the Purchaser or thirty(30)days after the date of the Product invoice to the Purchaser,whichever comes first. This Limited Warranty Coverage Ends After the First Occurrence of: Ten(10)Years or 100,000 Miles Who Is Covered by this Limited Warranty:This Limited Warranty only applies to Purchaser and, unless required by applicable law,may not be assigned or transferred to any other person or entity without OEM's prior written authorization.This Limited Warranty is valid only in the country in which the Product is first sold. How to Obtain Warranty Service:See the Operator Manual(s)for instructions on how to register the Product,to obtain warranty repair authorization and service,and to make arrangements for the Product to be transported to an OEM-authorized service facility for warranty service.All warranty service and towing must be authorized by an OEM customer service representative before any warranty or towing service is performed.OEM shall not be responsible for,or reimburse Purchaser for,any costs or expenses relating to unauthorized warranty service or towing.Purchaser must notify OEM or its authorized customer service representative as soon as possible after discovery of any defect with the Product but in no event more than ten(10)days after discovery. General Exclusions and Conditions;What This Limited Warranty Does Not Cover: The Product may incorporate subsystems,assemblies,parts,components,and other items manufactured by third-party manufacturers which may include,but are not limited to,chassis,engine Exclusive Remedy:OEM will,at its option,repair or replace the Product if it is defective in materials and emissions system,transmission,transfer case,axles,suspensions,water pumps,monitors, or workmanship during the warranty period stated above and covered by this Limited Warranty.Such valves,foam systems,aerial devices(each,a"Third-Party Part"and collectively,the"Third-Party repair or replacement may be performed at an OEM facility or by an OEM-authorized service facility. Parts").OEM does not warrant Third-Party Parts. Defects in materials and workmanship related to Any repaired or replaced Product shall be warranted only for the remainder of the warranty period Third-Parry Parts that carry their own warranty are subject to that warranty.OEM hereby assigns to applicable to the original Product.THIS PARAGRAPH CONTAINS OEM'S SOLE OBLIGATION AND Purchaser any assignable warranty applicable to the Third-Party Parts.The previous sentence is PURCHASER'S EXCLUSIVE REMEDIES FOR ANY DEFECTIVE PRODUCT COVERED BY THIS LIMITED OEM's sole obligation with respect to Third-Party Parts. WARRANTY. This Limited Warranty does not apply to,and OEM shall have no responsibility or liability for,any Third Party Representations: No person or entity is authorized to create any other warranty, claim,loss or damage resulting from or caused by any of the following:(a)normal wear and tear;(b) obligation or liability in connection with the Product,and OEM is not responsible for any misuse,carelessness,abuse or neglect(e.g.overloading,driving over curbs or exposure to corrosive representation,promise or warranty made by any person,dealer,component manufacturer,vehicle or flooded environments);(c)improper handling,storage or repairs;(d)use of the Product other than manufacturer,or other entity beyond what is expressly stated in this Limited Warranty. for its intended purpose;(e)collision,fire,theft,vandalism;(f)weather,freezing,flooding,acts of God,or other casualties;(g)exposure to salt,acids,corrosive agents or other damaging chemicals or materials;(h)components or systems,whether new or used,provided by Purchaser and installed at Disclaimer of Other Warranties:THIS LIMITED WARRANTY IS OEM'S SOLE AND EXCLUSIVE its request;(1)when the odometer or hour meter is disconnected,or its reading has been altered,or WARRANTY WITH RESPECT TO THE PRODUCT. EXCEPT FOR THE LIMITED WARRANTIES STATED IN actual mileage or hours cannot be determined;0)improper maintenance or use including,but not THIS CERTIFICATE,OEM MAKES NO OTHER EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES limited to,failure to follow the required or recommended maintenance schedules,failure to maintain WHATSOEVER REGARDING THE PRODUCT INCLUDING,WITHOUT LIMITATION,ANY WARRANTIES OF operating parameters,and failure to follow operating instructions;(k)any Third-Party Parts;(1) MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE,OR NON-INFRINGEMENT,OR ANY additions or accessories not originally installed by OEM,including ancillary equipment used in WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE,ALL OF WHICH ARE firefighting,and any problems resulting from such additions or accessories;(m)any"aftermarket" EXPRESSLY DISCLAIMED.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION devices installed on the Product;(n)the repair or modification of any existing part,component or ON THE FACE HEREOF.TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NOT BE DISCLAIMED subsystem originally installed by OEM without its prior express written authorization and any UNDER APPLICABLE LAW,SUCH WARRANTIES ARE EXPRESSLY LIMITED TO THE DURATION OF THE problems resulting from such repair or modification. Further,this Limited Warranty shall be null and EXPRESS WARRANTY STATED IN THIS CERTIFICATE. void if the Product is ever leased or rented,whether or not for compensation,to another person or entity. Limitation of Liability: IN NO EVENT SHALL OEM BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY INDIRECT, Miscellaneous Terms: INCIDENTAL,SPECIAL,EXEMPLARY,ENHANCED,PUNITIVE OR CONSEQUENTIAL DAMAGES RELATING OEM reserves the right to make changes to the Product without incurring any obligation to modify or TO OR ARISING OUT OF THE PRODUCT OR OTHERWISE(INCLUDING,WITHOUT LIMITATION,LOST improve previously manufactured parts or products.Further,OEM may respond to or correct any REVENUE,LOST PROFITS,LOSS OF OPPORTUNITIES,LOSS OF USE,DOWN TIME,DIMINUTION IN issue or complaint for which it does not otherwise have responsibility under this Limited Warranty VALUE,COST OF ALTERNATIVE TRANSPORTATION,INCONVENIENCE,COST OF LODGING,VEHICLE without becoming obligated to respond to or correct any future issue or complaint of a same or RENTAL EXPENSES,LABOR CHARGES,EQUIPMENT RENTAL CHARGES OR OTHER ECONOMIC LOSSES), similar nature,and such response or correction shall not constitute an admission of warranty WHETHER IN AN ACTION IN CONTRACT OR TORT(INCLUDING NEGLIGENCE),STRICT LIABILITY OR coverage or impose any additional obligations on OEM. OTHERWISE,EVEN IF OEM HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.FURTHER, OEM'S LIABILITY FOR ANY AND ALL WARRANTY CLAIMS HEREUNDER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. RFW0800-Plumbing and Piping(Stainless Steel)-30Y-100K-2102 2102