HomeMy WebLinkAbout21-0922 LDV Inc September 22, 2021 Agenda
Bid Item: #3 —Cooperative Purchasing Program-Mobile Emergency
Operations Unit ($826,599)
PURCHASE AGREEMENT
THIS AGREEMENT is hereby made and entered into this 22nd day of September ,
2021, by and between the City of Elgin, Illinois, a municipal corporation (hereinafter referred to
as "City") and LDV, Inc., a Wisconsin corporation, (hereinafter referred to as "LDV" or
"Seller").
NOW, THEREFORE, for and in consideration of the mutual promises and covenants
contained herein, the sufficiency of which is hereby mutually acknowledged, the parties hereto
hereby agree as follows:
1. PURCHASE. City shall purchase, and LDV shall sell the goods and/or services
described by Attachment A, attached hereto and made a part hereof.
2. TERMS. This agreement shall be subject to the price, terms and conditions
contained herein; as provided by Attachment A; and as provided by a joint purchase agreement
through the Houston Galveston Area Council, under contract No. AM10-20, incorporated herein
by reference(hereinafter referred to as the "JPA").
3. CONFLICT. In the event of any conflict between any of the terms and provisions of this
agreement and either Attachment A or the JPA, or any portion thereof, the terms and provisions
of this agreement shall control. In the event of a conflict between Attachment A and the JPA,
Attachment A shall control.
4. LAW/VENUE. This agreement is subject to and governed by the laws of the State of
Illinois. Venue for the resolution of any disputes or the enforcement of any rights arising out of
or in connection with this agreement shall be the Circuit Court of Kane County, Illinois. LDV
hereby irrevocably consents to the jurisdiction of the Circuit Court of Kane County, Illinois for
the enforcement of any rights, the resolution of any disputes and/or for the purposes of any
lawsuit brought pursuant to this agreement or the subject matter hereof; and LDV agrees that
service by first class U.S. mail to Rick Guerra, 2300 Browns Lake Drive, Burlington, WI 53105-
7105 shall constitute effective service. Both parties hereto waive any rights to a jury.
5. NO MODIFICATION. There shall be no modification of this agreement, except in
writing and executed with the same formalities as the original.
6. MERGER. This agreement embodies the whole agreement of the parties regarding the
subject matter hereof. There are no promises, terms, conditions or obligations other than those
contained herein regarding the subject matter hereof, and this agreement shall supersede,
supplant and replace all previous communications, representations or agreements, either verbal,
written or implied between the parties hereto regarding the subject matter hereof.
7. INTEREST. LDV hereby waives any and all claims or rights to interest on money
claimed to be due pursuant to this agreement, and waives any and all such rights to interest to
which it may otherwise be entitled pursuant to law, including, but not limited to, pursuant to the
Local Government Prompt Payment Act (50 ILCS 505/1, et seq.), as amended, or the Illinois
Interest Act (815 ILCS 205/1, et seq.), as amended. The provisions of this paragraph shall
survive any expiration, completion and/or termination of this agreement.
8. SEVERABILITY. The terms of this agreement shall be severable. In the event any of
the terms or the provisions of this agreement are deemed to be void or otherwise unenforceable
for any reason,the remainder of this agreement shall remain in full force and effect.
9. COMPLIANCE WITH LAW. Notwithstanding any other provision of this agreement,
it is expressly agreed and understood that in connection with the performance of this agreement,
LDV shall comply with all applicable federal, state, city and other requirements of law,
including, but not limited to, any applicable requirements regarding prevailing wages, minimum
wage, workplace safety and legal status of employees. Without limiting the foregoing, LDV
hereby certifies, represents and warrants to the City that all of LDV's employees and/or agents
who will be providing products and/or services with respect to this agreement shall be legally
authorized to work in the United States. LDV shall also, at its expense, secure all permits and
licenses, pay all charges and fees, and give all notices necessary and incident to the due and
lawful prosecution of the work, and/or the products and/or services to be provided for in this
agreement. The City shall have the right to audit any records in the possession or control of
LDV to determine LDV's compliance with the provisions of this section. In the event the City
proceeds with such an audit, LDV shall make available to the City LDV's relevant records at no
cost to the City. City shall pay any and all costs associated with any such audit.
10. PAYMENT. City shall pay the total sum of$826,599 within thirty(30) days of delivery
or city's receipt of invoice, whichever is later. The aforementioned total sum is inclusive of all
applicable taxes.
11. DELIVERY. LDV shall complete delivery of all goods and/or shall provide all services
on or before August 31, 2022.
12. LIMITATION OF DAMAGES. In no event shall City be liable for any monetary
damages in excess of the purchase price contemplated by this agreement. In no event shall City
be liable for any consequential, special or punitive damages, or any damages resulting from loss
of profit.
13. TRANSFER OF TITLE/RISK. Transfer of title, and risk of loss shall pass to the City
upon delivery of any applicable goods.
14. INDEMNIFICATION. To the fullest extent permitted by law, LDV shall indemnify,
defend and hold harmless the City, its officers, employees, boards and commissions, from and
against any and all claims, suits,judgments, costs, attorney's fees, damages or any and all other
relief or liability arising out of or resulting from or through or alleged to arise out of any acts or
negligent acts or omissions of LDV or LDV's officers, employees, agents or subcontractors in
the performance of this agreement, including but not limited to, all goods delivered or services or
work performed hereunder. In the event of any action against the City, its officers, employees,
agents, boards or commissions covered by the foregoing duty to indemnify, defend and hold
harmless, such action shall be defended by legal counsel of the City's choosing.
2
15. EXECUTION. This agreement may be executed in counterparts, each of which shall be
an original and all of which shall constitute one and the same agreement. For the purposes of
executing this agreement, any signed copy of this agreement transmitted by fax machine or e-
mail shall be treated in all manners and respects as an original document. The signature of any
party on a copy of this agreement which may be signed electronically or transmitted by fax
machine or e-mail shall be considered for these purposes as an original signature and shall have
the same legal effect as an original signature. Any such faxed or e-mailed copy of this
agreement shall be considered to have the same binding legal effect as an original document. At
the request of either party any fax or e-mail copy of this agreement shall be re-executed by the
parties in an original form. No party to this agreement shall raise the use of fax machine or e-
mail as a defense to this agreement and shall forever waive such defense.
The person signing this agreement certifies that s/he has been authorized by the Seller to
commit the Seller contractual and has been authorized to execute this agreement on its behalf.
IN WITNESS WHEREOF the parties have hereto set their hands the day and year first
above written.
LDV, INC. CITY OF IN
Kurt Petrie / �j
Print Name Ric ar G. oza1,City Manhgtr
Signature ATTE 'T
President
Title Ci � C erk
W���
F:\Legal DepMgreementA.DV Purchase Agr-Mobile Emergency Unit-6-16-2I docx
3
ATTACHMENT A
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986
L 0 vl�l� Fax:(262)767.2529
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
PRELIMINARY
SPECIFICATIONS FOR:
ELGIN, CITY OF (IL)
MOBILE COMMAND CENTER
LDV MODEL #C45MCC-34901-20
DATE
June 11, 2021 REV1
MAY 4,20217m9
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558-5986
L 17 Fax:(262)767.2529
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
TABLE OF CONTENTS
CHASSIS:...................................................................................................................................................................4
BODY:.........................................................................................................................................................................5
PAINT/GRAPHICS: ..................................................................................................................................................7
DRIVER/ PASSENGER CAB AREA:
WALLS, CEILING AND FLOOR:................................................................................................................................8
SEATING: ...................................................................................................................................................................9
CABINETS:.............................................................................................................................................................. 10
HVACSYSTEM:...................................................................................................................................................... 11
ACELECTRICAL SYSTEM:.................................................................................................................................... 11
DC ELECTRICAL SYSTEM: ................................................................................................................................... 14
EMERGENCY LIGHTING/SIRENS:...................................................................................................................... 16
AUDIO/VIDEO: ...................................................................................................................................................... 17
MAST AND MAST MOUNTED EQUIPMENT: ........................................................................................................ 19
RADIOS, .................................................................................................................................................................. 20
COMPUTER NETWORK AND EQUIPMENT: ........................................................................................................ 21
MISCELLANEOUS ELECTRONICS: ...................................................................................................................... 22
EXTERIOR STORAGE COMPARTMENTS:........................................................................................................... 22
MISCELLANEOUSOTHER: ................................................................................................................................... 23
Page 2 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558-5986 0 VaFax:(262)767.2529
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
PRICING PAGE:
Total price per unit as specified, FOB Origin $888,377.00
Discount amount -$63,928.00
HGAC discounted price for 1 unit as specified $824,449.00
Contract Administration Fee-HGAC $1,000.00
HGAC discounted price for 1 unit as specified with Contract Admin Fees $825,449.00
Delivery charge to Elgin, City Of(IL) $1,150.00
Total price per unit $826,599.00
Delivery terms: 360 Days from ARO
Payment Terms: Net 30 days.
Quote is firm for 30 days from specification date.
Quoted price does not include any applicable FET, federal, state or local tax unless specified.
Page 3 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558-5986
L OVD Fax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qt
1.00 CHASSIS/BODY DIMENSIONS:
33' dry van wide body tandem
•Wheelbase of chassis: 333"
• Overall length of apparatus: 528"
• Overall apparatus width, rub rail to rub rail: 102"
• Overall height of apparatus (loaded): 149"
• Interior walkway height raw body: 83"
• Interior walkway height finished: 81.5"
• Interior walkway length: 396"
• Interior raw body width: 99"
• Interior finished body width: 93"
Final measurements are dependent on body builder, chassis components, axles, tires, frame,
suspension, and roof-mounted equipment.
2.00 CHASSIS:
2.01 1 2022 International HV607 SBA 6x4 Conventional Cab, Tandem Axle 56,000 GVWR with rear
air suspension and air brakes.
ENGINE:
• Cummins 1-9-360 EPA 2017, 360 HP @ 2000 RPM, 1000 lb-ft Torque @ 1400 RPM, 2200
RPM Governed Speed
• Single, Horizontal Aftertreatment Device, Frame Mounted Under Right Rail, Back of Cab,
Includes Short Horizontal Tail Pipe
• Engine Exhaust Brake with Variable Vane Turbo Charger
•240-amp pad mount alternator
•Three 12-volt 1980 CCA maintenance free batteries
• Block heater 1000-Watt, 120 volt
TRANSMISSION:
•Allison 3000 EVS 5th Generation Controls; Close Ratio, Close Ratio, 6-Speed with Double
Overdrive, with PTO Provision, Less Retarder, Includes Oil Level Sensor
• Synthetic transmission oil
AXLE, FRONT NON-DRIVING:
• Dana Spicer D-2000W)Wide Track, I-Beam Type, 16,000-lb Capacity
REAR AXLE AND SUSPENSION, SINGLE:
• Meritor MT-40-14X-5DFR, Single Reduction, 40,000-lb Capacity, .5"(12.7mm) Wall Housing
Thickness, R Wheel Ends Gear Ratio: 5.29
• International) Ride Optimized Suspension (IROS) Heavy Duty, 40,000-lb Capacity, 52"Axle
Spacing, 9.25" Ride Height, Includes Heavy Duty Spring Hangers, Crossmembers and
Fasteners, with Shock Absorbers
BRAKES:
•Air brake ABS, Bendix AntiLock Brake System, 4-Channel (4 Sensor/4 Modulator) Full
Vehicle Wheel Control SystemAir dryer with heater
• 18.7 CFM air compressor
FUEL TANKS:
•40 gal. LH, 50 gal. RH
• Fuel/water separator 12 Vdc Electric Heater, Includes Pre-Heater, with Primer Pump,
Includes Water-in-Fuel Sensor
• DEF tank, 7 gal.
CAB:
• Conventional
•Tilt steering column
Page 4 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800-558-5986 0 VaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qty
• 18"4-spoke steering wheel
•Air conditioner with Integral Heater& Defroster
• Gauge Cluster Base Level; English with English Speedometer and Tachometer, for Air Brake
Chassis, Includes Engine Coolant Temperature, Primary and Secondary Air Pressure, Fuel
and DEF Gauges, Oil Pressure Gauge, Includes 3 Inch Monochromatic Text Display
• Gauge, oil temp, auto trans for Allison Transmission
• Seat, driver National 2000, Air Suspension, High Back with Integral Headrest, Vinyl, Isolator,
1 Chamber Lumbar, 2 Position Front Cushion Adjustment, -3 to+14 Degree Seat Back Angle
Adjust, Dual Shocks
• Seat, passenger National 2000, Air-Suspension, High Back with Integral Headrest, Vinyl,
Isolator, 1 Chamber Lumbar, 2 Position Front Cushion Adjustment, Dual Shocks
• Power windows and door locks
TIRES AND WHEELS:
• (2) 315/80R22.5 Load Range L X WORKS Z(MICHELIN), 485 rev/mile, 65 MPH, All-Position
• (8) 11 R22.5 Load Range G ENDURANCE RSA(GOODYEAR), 496 rev/mile, 75 MPH,All-
Position
•Wheels, Front{Accuride 41730) DISC; 22.5x9.00 Rims, Standard Polish Aluminum, 10-Stud,
285.75mm BC, Hub-Piloted, Flanged Nut, with Steel Hubs
•Wheels, Rear{Accuride 426441 DUAL DISC; 22.5x8.25 Rims, Standard Polish Aluminum, 10-
Stud, 285.75mm BC, Hub-Piloted, Flanged Nut, with Steel Hubs
PAINT AND MISCELLANEOUS:
• Cab paint: Cool Gray Light (Std)
•Tow Hook, Front(2) Frame Mounted
• Horn, Air(2) Single Tone, Chrome, Roof Mounted, with Lanyard Pull Cord
• Chassis Coating Corrosion Resistant E-Coat Primer Coating for Reinforced Frame Rails
• Fog lights (2) Clear Lens, LED, Rectangular, with White Light Source
NOTE:
HEIGHT LIMIT-- 13'-9"
2.02 1 O.E.M. batteries and air tanks will be under body behind door in skirt. Door gives access to
batteries and air tanks for service.
2.03 1 Federal Signal Back-up alarm model 210331.
2.04 1 Block heater shall be controlled through the Intel-I-Touch TM multiplex control screen.
2.05 1 US DOT triangle reflector kit with three(3)triangles, for compliance with FMCSA regulations.
Includes plastic storage case. Kit will be shipped loose in the vehicle.
2.06 1 Pair of heavy duty, 1/2"thick steel tow eyes securely fastened to the rear chassis frame rails
and extending through the rear kick panel of the body.
NOTE:
Each tow eye shall be bolted in place for removal if necessary. Location: Under rear of body.
2.07 1 Route horizontal exhaust to streetside.
3.00 BODY:
3.01 1 • Load space area shall be 83" high x 102"wide x 33' long custom all aluminum dry van body
with the following:
•Aluminum alloy double H wall beam, 6005-T5 alloy, 3"deep x 1.5"wide, 0.125 wall thickness.
Studs feature machined wire pass-throughs, and raised adhesive control features on base.
• I-beams chemically bonded to sidewalls eliminating the need for additional rivets. Buck-rivets
will be used to fasten the top, bottom and rub rail. Use of two-sided tape is not acceptable.
• Body shall have 0.125"strain-hardened aluminum alloy 5052-H36 side panels. The upper
panels shall be free of rivets allowing for smooth graphics application.
Page 5 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qty
• Skirt supports,1.5 x 1.5 x 0.125 angle to reinforce skirt edge and hold bottom edge in a
straight line. 0.188 x 1.00"flat braces placed at 4' intervals and riveted to lower wall angle and
floor to maintain sidewall skirt rigidity.
• Fender flares, 1.38"x 2.25"x 0.090" roll formed and radiused 5052-H32 aluminum sheet,
mechanically fastened to wheel opening. Edges sealed against moisture.
• NFPA 1901 embossed 0.125"aluminum tread plate roof attached to 3"x 1 1/2"x 0.125
extruded aluminum roof bows on 16"centers. Bows are 2" skip welded every 12"Tread plate
seams shall be continuous welded. Perimeter of roof shall be chemically sealed.
• Extruded aluminum floor with interlocking planks, 1.88" high x various widths, 0.125"top
surface. 6005-T5 alloy and temper. Heavy-duty thick-wall extruded planks fore and aft of all
floor cutouts and every 5th plank in all other areas. Planks made of 600545 alloy and temper,
0.250"thick top surface.
• Full width 12"deep heavy-duty aluminum rear bumper with center step, painted to match the
body.
• Full length skirting below floor.
•All clearance and side marker lights to be LED.
• Standard structural warranty of 5 years or 50,000 miles and standard component warranty of
12 months or 12,000 miles.
•The vehicle shall be fully sanded on all exterior surfaces with no more than 150 grit to assure
removal of imperfections in metal surface. All aluminum shall be chemically etched and primed
prior to painting. Base body color shall be oven baked and painted to commercial truck
standards.
Note: Specifications are from body manufacturer and are subject to change without notice.
NOTE:
HEIGHT LIMIT-13'-9"-Garage door.
3.02 2 32"wide aluminum sedan door installed above floor. Includes 21.5"wide x 25.5" high fixed
window. Door shall have continuous stainless-steel piano hinge, two (2) nylon door straps and
an aluminum drip rail.
NOTE:
One 1 Curb side entry door, One 1 Rear door.
3.03 1 Rear underbody skid bar. Protects rear bumper and skirts from possible damage caused by
steep grades. Includes:
• 3 '/2" steel tube across the width of the vehicle mounted to the frame with steel channel and
supported diagonally from the ends to the frame mounts
• Steel tube is capped on the ends and mounted just below the skirting
3.04 2 Interior heavy-duty fluted aluminum grab handle with rubber inserts and chrome plated
stanchions installed at entry door.
NOTE:
Locate: One 1 Entry door, One 1 Rear door
3.05 2 Wire one of the overhead lights to function as a courtesy light when the entry door is opened.
NOTE:
One (1) Curb side entry door, One 1 Rear door.
3.06 1 Courtesy light defeat in Intel-I-Touch TM multiplex control screen. One control button will enable
or disable all entry door courtesy lights in the vehicle.
Page 6 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REW CC.doex
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986
L 17 Fax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
Item Qt
3.07 2 Pull out aluminum stairs encased in a narrow profile cassette installed below floor line,
eliminating the need for an interior stepwell. Includes exterior fold out handrail.
NOTE:
One 1 Entry door, One 1 Rear door
3.08 1 Whelen Stop/Turn/Tail/Backup light set. Includes two of each of the following:
•Whelen M6FCV4 polished chrome vertical housings for four M6 series lightheads. The fourth
light head will be an emergency flasher as specified in the DC Emergency Lighting section.
•Whelen M6 series LED arrow shaped amber turn signal, model number M6T.
•Whelen M6 series LED brake/tail light heads, model number M6BTT.
•Whelen M6 series LED back-up light heads, model number M6BUW.
3.09 1 Cast Products LP0004-1-B aluminum license plate mounting frame with LED light.
3.10 1 Entire underside shall be undercoated. Includes chassis, floor extrusions, step wells and
aluminum compartments.
3.11 1 LDV rear mud flaps. Includes anti-sail brackets when required.
3.12 2 Flat floor slide-out room extension fabricated with a structurally rigid welded aluminum tube
design with a fully bonded aluminum shell. During deployment an electronic control system
automatically expands the room extension and lowers the floor to flush position.
Features:
• Electric over hydraulic control system programmed to lower the slide out to floor height after
full extension.
•Awning that automatically extends and retracts over the top of the room to protect from
weather and debris.
• Full perimeter double rubber bulb seal with an additional seal in the fully extended and fully
retracted positions.
• No track or hardware shall be attached to the ceiling of the body.
NOTE:
Front slide-out, 30"deep with 26"extension.
3.13 2 Flat floor slide-out room extension fabricated with a structurally rigid welded aluminum tube
design with a fully bonded aluminum shell. During deployment an electronic control system
automatically expands the room extension and lowers the floor to flush position.
Features:
• Electric over hydraulic control system programmed to lower the slide out to floor height after
full extension.
•Awning that automatically extends and retracts over the top of the room to protect from
weather and debris.
• Full perimeter double rubber bulb seal with an additional seal in the fully extended and fully
retracted positions.
• No track or hardware shall be attached to the ceiling of the body.
NOTE:
Rear slide-out, 30"deep with 26"extension.
3.14 Ignition Interlock to prevent vehicle from starting when any of the external extension devices
are deployed.
3.15 8 Flashing warning light for slide out.
NOTE:
Amber LED color.
4.00 PAINT/GRAPHICS:
4.01 Body paint base color shall be commercial single-color paint from the roof line down.
4.02 1 4-inch wide reflective stripe on the exterior back and sides of the vehicle.
Page 7 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qty
4.03 1 Custom computer-generated non-reflective vinyl graphics per customer specifications.
Includes up to seventy 8"-10" letters and up to forty-five 3"-6" letters. All lettering can be
shaded or outlined.
Note:Graphics package does not include production of custom shields and/or seals.
4.04 4 Custom computer-generated non-reflective vinyl shield. Customer shall supply true vector
artwork required to produce shield.
5.00 INDEPENDENCE ONYX INTERIOR:
•Wall Covering: #66 Silver Smooth FRP
• Ceiling Fabric: Silver Mist
• Floor Covering: #150 Onyx PVC Flooring
• Office Chairs: Black
•Vinyl Coverings: #WH1-2140 Whisper Black
• Cabinets: #EBT-2-2002 Black Powder Coated Aluminum
• Counters and Tables: #4880-38 Carbon Mesh Laminate
Note: Manufacturer reserves the right to substitute equivalent materials.
6.00 DRIVER/PASSENGER CAB AREA:
6.01 1 Custom fabricated console in cab, for locating siren controller, police radio and/or other
controls as specified elsewhere in this document.
NOTE:
Console:
One (1) Radio prewire dual head radio
One (1) 10" multiplex screen
One 1 Siren controller
6.02 Cab Area Additions:
•Vehicle height sign on dash.
•Vehicle shall have a Final Stage Vehicle Certification and Altered Vehicle Certification as
required by Federal Motor Vehicle Safety Standards (FMVSS)49 CFR Part 567.5 and 567.7
• Payload sticker in cab area with vehicle axle load ratings and available axle payload as built.
6.03 1 Three(3) camera rear view system with 7' LCD color monitor. System includes left, right, and
rear vision day/night cameras. Rear camera includes a microphone for audio commands from
a spotter to the driver during backing operations.
7.00 WALLS, CEILING AND FLOOR:
7.01 Insulate walls with a minimum of 2-1/2"of fiberglass insulation. Cover interior body side posts
with 1/2" lywood sub wall.
7.02 Cover sub wall with smooth finish Kemlite 0.075"fiberglass reinforced plastic (FRP) lining.
Wall covering shall be a continuous piece front to back, no seams acceptable.
7.03 Insulate ceiling with a minimum of 2-1/2"of fiberglass with an R-11 rating.
• Cover interior roof beams with 1/2" plywood.
• Modular panel design allows for manageable future additions and repairs.
• Plywood Panels covered in acoustical fabric.
NOTE:
Ceiling finish will be silver mist headliner material
7.04 Floor underlayment to be 5/8" exterior grade tongue and groove structural plywood, 6 ply, face
veneer plu ged and sanded.
7.05 Lonseal Loncoin II Flecks non-skid commercial grade PVC flooring. The flooring shall be
continuous, one piece full length, full width, no seams.
NOTE:
150 Onyx
7.06 Vinyl cove molding (mop board) at base of wall, 2-1/2" high. Installed where required.
Page 8 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986 0 VaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qty
7.07 1 Flush pocket door installed on heavy-duty aluminum track with two(2)four-wheel roller trucks.
Pocket door shall have recessed handle and magnetic closure to keep the door open/closed.
NOTE:
Front conference room pocket door.
7.08 1 Customized pocket door for noise reduction. Flush pocket door installed on heavy-duty
aluminum track with two (2)four-wheel roller trucks. Pocket door shall have recessed handle
and magnetic closure to keep the door open/closed.
NOTE:
Rear conference room pocket door.
7.09 1 Install bottom door sweep on pocket door.
7.10 2 14"x14"window in pocket door with black out curtain.
7.11 All bulkheads shall be covered with Kemlite 0.075" FRP. Trim exposed edges of bulkheads
with rounded anodized aluminum trim where applicable.
7.12 2 Cover load space door with powder coated aluminum panel with heavy-duty rubber grab
handle.
NOTE:
Interior window covering will be a mini blind. Powder coat color will be black.
7.13 4 Flush mount deep-tint fixed window installed on side wall in slide out.
7.14 4 Blackout curtain
NOTE:
Black outs on slide out windows
8.00 GALLEY:
8.01 1 GE 1.1 cu.ft. 950-watt microwave oven. Model JES1145DMBB
NOTE:
Black
8.02 1 Norcold NR751 B AC and DC powered refrigerator with the following features:
• 2.7 cu. ft. capacity.
• Freezer shelf for ice cube tray.
• Door bin holds 2-liter containers.
• Integrated door latch.
• 120/230Vac 50/60 Hz and 12/24 Vdc
9.00 SEATING:
9.01 13 Space Air Grid office chair 5560 black with armrests, five caster spider base, and adjustable
height.
9.02 Fabricate and install flip-down bench seating as shown on drawing. Bench seat cushions shall
be covered in heavy-duty vinyl. Bottom seat cushion will be installed on Zico Quic-Seat®fold
down spring loaded seat brackets.
NOTE:
Locate flip down bench seating in Street side and Curb side front conference room slide outs
9.03 BENCH SEAT REQUIREMENTS:
• Foam for seat backs and bottoms shall be firm density.
•All bench seating material must meet Federal Motor Vehicle Safety Standards part 571.302
Flammability of Interior Materials.
• Material corners shall be squared or angled to fit precise cut of foam.
• Foam shall be bonded to plywood backer with industrial grade adhesive.
•Attachment of fabric/vinyl to backer shall utilize industrial grade upholstery staples.
Page 9 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,Wl 53105 USA
Phone:800-558.5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
Item Qty
10.00 CABINETS:
10.01 Custom fabricated aluminum cabinets located as shown on drawing. Cabinet specifications:
• Base cabinets constructed of 0.080" powder coated aluminum with anodized aluminum
frames.
• Base cabinet doors are double shell, formed from a single sheet of 0.080"aluminum, with a
0.040"aluminum door back attached.
• Overhead cabinets constructed of 0.064"powder coated aluminum with anodized aluminum
frames.
• Overhead cabinet doors are double shell, formed from a single sheet of 0.064" aluminum,
with a 0.040"aluminum door back attached.
• Overhead cabinet doors swing up and gasspring lift supports.
10.02 Radius edging incorporated as design permits.
10.03 6 Dry erase writing surface on overhead cabinet door.
10.04 6 Gas spring lift supports on overhead cabinet door.
10.05 1 LED light under overhead cabinet.
NOTE:
Galley
10.06 8 Magnetic dry erase board framed in aluminum. Includes aluminum clip frame for easy board
replacement, sized as required.
NOTE:
Locations:
Two (2) Front conference room street side slide out above flip down seating
Two (2) Front conference room curb side slide out above flip down seating
Two(2) Font conference room, curb side and street side pocket door bulk head wall
Two 2 Rear, conference room, street and curb side bulk head walls
10.07 Access hole behind magnetic dry erase board.
NOTE:
Access for electronics rack.
10.08 Countertops shall be covered in 0.040" Wilsonart laminate. All exposed edges shall be
covered with heavy duty flexible PVC T-molding.
10.09 Conference table covered in 0.040" Wilsonart laminate. All exposed edges shall be covered
with heavy duty flexible PVC T-molding.
10.10 Removable table covered in 0.040"Wilsonart laminate. All exposed edges shall be covered
with heavy duty flexible PVC T-molding.
NOTE:
Rear conference room removable table. Table to be stored on street side electronics bulk head
wall.
10.11 4 Small flip-down laminate work surface.
NOTE:
Locate:
Two(2) Street side slide out
Two 2 Curb side slide out
10.12 1 Powder coated 0.125" aluminum conference table base.
NOTE:
One 1 Each at rear workstations
10.13 6 Computer cable pass-thru grommet in counter.
10.14 1 Install a key display board inside overhead cabinet and clearly tag all keys for the vehicle as to
their pur ose.
10.15 Custom fabricated console to house electrical distribution components and control panels.
Page 10 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986 0 VaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qt
11.00 HVAC SYSTEM:
11.01 1 Fan-tastic Vent model 1450 3-speed reversible 12"power roof ventilator.
11.02 4 Ducted Coleman Polar Mach 8 series low profile air conditioner with thermostat. Includes:
• High Capacity Air Duct manufactured from polystyrene foam laminated with 99% pure
polished aluminum inside and out, internally mounted in ceiling
• 13,500 nominal Btu/hr air conditioner with condensate pump.
• Chill Grille Assembly with 6,000 Btu/hr heat strip
•Wall mounted thermostat
• Louvered Ceiling Vents, as required
11.03 1 Broan model 112 kick space mount 5,120 Btu/hr electric heater. Located as shown on
drawing.
11.04 2 12,000-16,000 Btu/hr direct discharge, 12Vdc powered, diesel-fired furnace with individual
thermostat control. Exhaust shall be routed to the street side.
NOTE:
Wabasto Furnaces Front& Rear w/Electric in Middle
12.00 AC ELECTRICAL SYSTEM:
12.01 1 Power Tech 25-kW 120/240Vac liquid-cooled diesel generator with air bag mounts installed in
a custom fabricated compartment. (17010050) Generator features:
•Tier 4F Emissions
• USTC Certified Manufacturer
•Warranty: 2 years from date of purchase, or 3000 hours whichever comes first, or 36 months
from the date of manufacture.
• Four point air bag mounting system
• Four-cycle water cooled diesel engine
• Radiator cooled, direct mounted
• High-coolant temp and low oil pressure shutdown sensors
• Spin-on fuel and oil filter
• Single side service
•Typical Gallon Per Hour fuel consumption: 25% load = 0.51, 50% load = 1.01, 100% load =
2.03
NOTE:
Generator exhaust shall be routed to the street side of the vehicle.
12.02 1 ACData surge suppressor for protection of entire AC power system.
Product features:
• UL listed: UL1449 3rd Edition
• LED visual verification of status
Page 11 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800-558.5986
L 0 Fax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qt
12.03 1 LDV exclusive Intel-I-Touch TM vehicle automation control system.
A multiplexed vehicle automation system must be incorporated into a common touch screen(s)
that is custom programmed to monitor and control onboard systems as described throughout
the specifications. The automation system software must allow simultaneous distribution of
information to multiple onboard control/monitoring stations and the software must be
updateable and configurable as required. This system is mandatory as it simplifies start up
procedures, contains fewer operating components, reduces operational start-up time, reduces
the total amount of wiring in the vehicle and includes error detection protocols and
troubleshooting features.
Features include:
• One(1) 10" LCD touch screen with custom graphics for control and monitoring systems
•AC power distribution control and monitoring for the generator with power management
• DC power distribution control and monitoring
• Manual or automatic generator control
• HVAC and temperature control.
• Interior and exterior lighting control
•Automatic power transfer switches
•Automated startup and shutdown procedures
• Seamless control of generators, lighting, awnings and additional devices
• Mast control
• Safety interlocks
The system must be completely upgradeable with power modules located throughout vehicle.
Additional components may be added to system with a simple software modification System
capability is not to be achieved with use of multiple monitoring systems designed for specific
use i.e.water monitors, battery monitors etc.
12.04 Battery Saver Feature
Battery Saver eliminates the need to turn off the battery breaker on an Intel-I-Touch truck in
order to save battery power.
NOTE:
Battery Saver feature automatically shuts down aux power if:
• Main Power off
•And, ignition is off
•And, shore power is not available
•And, generator is OFF (battery tend would count as ON)
•And, Battery drops below 12V
• Or, 4 hours has elapsed since above conditions (could tweak the timing)
Power returns automatically if the ignition is turned on or an entry door is opened.
12.05 1 Additional 10" LCD touch screen with custom graphics for control and monitoring systems. All
touch screens provide complete control and monitoring of vehicle systems.
NOTE:
Location: Cab
12.06 1 3"Touch panel for dedicated local control and monitoring of specific vehicle automation system
features. Includes control layout and indicators where applicable.
NOTE:
Locations: 1 Exterior TV compartment
Page 12 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REW CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800-558-5986
L BF Fax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
Item Qty
12.07 2 3"Touch panel with numeric display for dedicated local control and monitoring of specific
vehicle automation system features including room HVAC. Display shows current room
temperature and HVAC setpoint when adjusted. Includes control layout and indicators where
applicable.
NOTE:
Locations: One 1 in front room and one 1 in rear room.
12.08 Storage Mode
Storage Mode maintains the vehicle in a ready-to-deploy condition. Battery chargers, specified
outlets, and other pre-determined equipment is powered. HVAC is maintained at a storage
mode setting to prevent freezing in the winter or overheating in the summer. The generator
can be set to automatically start in the event of a loss of shore power. Other items as
necessary can be made available in Storage Mode.
12.09 Travel Mode
Travel Mode places the vehicle in a ready-to-travel condition based on vehicle application and
equipment. In most cases this includes: starting the generator and transferring off of shore
power, turning on HVAC and adjusting temperature to normal operating setpoints, stowing all
equipment for travel, powering up communication gear. Travel Mode is a custom programmed,
automated process similar to the Auto Startup and Auto Shutdown.
12.10 Night Time (Red) Lighting Mode turns the ceiling lighting in each room from white to red
lights.
12.11 Reduced Lighting Mode is white ceiling lighting in each room have the option of All-On or
Half-On.
12.12 Leveling Control
Intel4-Touch leveling touch screen indication of vehicle level and control of leveling jacks
individually or in pairs. Operators can manually stabilize and level the vehicle from any
touchscreen. Jacks are automatically retracted as part of the Auto Shutdown process.
12.13 1 Kussmaul Auto Eject 20, 20A-120Vac shore power inlet with 25-ft. 20A-120Vac shore power
cord. #091-20WP-120RD.
12.14 1 Marinco 100A-125/250Vac waterproof shore power inlet, 25-ft. 100A-125/250Vac shore power
cord and 6-ft. 100A-125/250Vac pigtail.
12.15 3 20A-125Vac duplex receptacle. Receptacle is not dedicated to any installed equipment.
NOTE:
Locate: One 1 Each in above rear upper street side cabinet. Total. 3
12.16 17 20A-125Vac duplex receptacle with dual USB charging ports. Receptacle is not dedicated to
any installed equipment.
NOTE:
Locate:
Two (2) in Front room conference table base
Two(2) Front street side slide out, flip down seat base
Two(2) Front curb side slide out, flip down seat base
One(1) swat operator desk area
One (1)at Each rear workstation#3 48 (Qty.6)
Four 4 Rear curb side charging station
12.17 4 20A-125Vac GFCI duplex receptacle. These receptacles are not dedicated to any installed
equipment.
NOTE:
Locate:
One (1) Curb side galley
Two(2) Exterior TV compartment
One 1 Rear exterior charging station
Page 13 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558-5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qty
12.18 4 20A-125Vac exterior GFCI duplex receptacle.
NOTE:
(4) Exterior Outlets—(2) Per Street Side &Curb Side
Receptacle will be installed with a weatherproof cover.
12.19 1 30A-125/25OVac receptacle
NOTE:
Locate outlet behind electric rack, outlet to be isolated.
12.20 Wire chase wire management raceway system located as shown on drawing. Product
features:
• Satin anodized finish. The finish resists rust, corrosion and fading. Material extruded from
6063-T5 aluminum alloy.
• Removable dual cover. Makes wiring easy and accessible and provides maximum flexibility
for adding or relocating outlets and circuits. The cover retention is 45 lbs. straight pull for one
minute.
• UL Listed multioutlet assemblies. File E68073 Guide PVGT, Fittings: File E121188 Guide
RJPR. Meets Article 380 of NEC and meets Section 12-3032 of CEC.
• UL and cUL Listed component raceways. File E73943 Guide RJBT, Fittings: File E74343
Guide RJPR. Meets Article 386 of NEC and meets Section 12-600 of CEC.
• UL5 and ADA compliant. Raceway and fittings meet UL5 specifications and can be installed
in conformance with ADA requirements
12.21 1 APC Smart-UPS 3,000VA rack mount UPS, SRT3000RMXLA(or current model). Product
features:
• 3,000VA/2,700W output capacity
• 120V output voltage
• (8) NEMA 5-20R and (1) NEMA L5-30R output receptacles
•Typical Backup Time at Half Load 19.2 minutes (1125 Watts)
• Typical Backup Time at Full Load 5.7 minutes (2250 Watts)
• Dimensions: 3.35"H x 17"W x 25"D
12.22 AC WIRING REQUIREMENTS:
•All AC main wiring shall be stranded THHN wire and run in non-metallic Carlon Carflex liquid
tight conduit.
•All AC branch circuit wiring shall be stranded THHN wire(AWG 12 minimum) and run in non-
metallic Carlon Carflex liquid tight and Carton Flex-Plus blue ENT conduit.
•All electrical circuits and appliances shall conform to applicable national electrical codes.
13.00 DC ELECTRICAL SYSTEM:
13.01 1 • Six(6) Lead acid deep-cycle 6Vdc batteries. Batteries shall be installed underbody in slide
out weather resistant compartment. Four(4) batteries will be separated for auxiliary equipment
and two (2) batteries will be for communications equipment.
•Three(3) electronic converter/chargers, 80 amp minimum output each.
Converter/charger features:
• Charges three banks of batteries at the same time.
• UL listed for safety.
• Manual reset circuit breaker.
• Reverse battery protection.
• Electronic current limiting.
• High voltage protection.
•All DC electrical and metering switched and monitored through the multiplex system.
Page 14 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800-558-5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qt
13.02 20 Light, Orion 6" LED, neutral white with polished bezel.
13.03 15 Light, Orion 6" LED, neutral white/red with polished bezel.
13.04 8 Whelen M9LZC Gradient LED Scene Light with chrome flange.
NOTE:
Three (3)curb side, Three(3) street side, Two (2) rear.
Each side can be controlled separately.
13.05 12 Whelen PELCC LED light with chrome housing.
NOTE:
Located:
• Five (5) on each side wall
•Two 2 on the rear—under the bumper not sticking out past the bumper)
13.06 2 12VDC dual USB power port.
NOTE:
Locate:
Two 2 Curb side exterior TV compartment
13.07 12VDC WIRING REQUIREMENTS:
•2-gauge minimum copper stranded battery cable shall be used for 12Vdc main supply lines.
All cable runs shall be full length, no splices. All cable terminals shall be staked and soldered.
All cable shall be enclosed in convoluted polyethylene tubing and the ends of the cable shall be
sealed with color-coded shrink-wrap identifying the function of the cable.
•All added electrical branch circuits shall be protected from over-current by resettable circuit
breakers appropriately rated for the load. Only circuit breakers shall be used in the installation
of added electrical branch circuit wiring (plug type fuses are unacceptable).
• Circuit breaker functions shall be identified by engraved or printed labels.
•All added wiring for load runs of AWG 10, 12, 14, and 18, shall conform to MIL-W-16878/2
and/or UL1007/1569"
•All added wiring for load runs of AWG 8, shall conform to MIL-W-16878/3 and/or U1-1028
•Wire terminals for added circuits must conform to MIL-T-7928. Terminals shall be insulated,
insulation grip, TYPE II, CLASS 2 and shall be crimped with tooling recommended by the
terminal manufacturer.
•All wiring shall be numbered or lettered on 6"centers minimum.
•Wiring shall be protected from chafing and abrasion with convoluted polyethylene tubing (wire
loom) as required.
•Where wire passes through sheet metal, bulkheads and structural supports, plastic grommets
shall be used to protect both wiring and wire looms.
•All wire bundles shall be tied with trimmed nylon ties.
• Extreme care shall be exercised to provide for easy serviceability of the system in future
years.
• Extreme care must be taken in the installation to avoid the engine manifold, engine exhaust,
and muffler, which could expose the wiring to severe overheating during long periods of
operation. Proper insulation and heat deflection panels must be installed in such areas.
•A high-current 12Vdc system wiring schematic shall be provided.
•These are the minimum acceptable 12Vdc wiring requirements.
Page 15 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986 0 VaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
Item Qty
14.00 EMERGENCY LIGHTING/SIRENS:
14.01 1 Whelen 295SLSA6 siren with 9 low current lighting control switches. California Title 13
compliant.
NOTE:
Slide Bar Positions Control:
1. Rear(Upper and Lower)
2. Rear(Upper and Lower), All Upper, Front Wall or"Light bar"
3. All
14.02 1 Whelen SA315P high performance speaker, with SAK9 bracket.
14.03 2 Whelen TLIR ION-T-SeriesTm Linear Super-LED®Red with clear outer lens&TIONFC
chrome flange.
NOTE:
One (1)grille street side low
One 1grille curb side high
14.04 2 Whelen TLIB ION-T-SeriesTm Linear Super-LED®Blue with clear outer lens &TIONFC
chrome flange.
NOTE:
One (1)grille street side low
One 1grille curb side high
14.05 4 Whelen M6 series, M6RC (or current model), Linear Super-LED lighthead with internal flasher,
RED LED's with CLEAR outer lens. Includes M6FC chrome flange.
NOTE:
One (1) curb side low mid-ship
One (1) rear high street side
One(1) rear low curb side in taillight housing
One(1)street side low near rear
14.06 4 Whelen M6 series, M6BC (or current model), Linear Super-LED lighthead with internal flasher,
BLUE LED's with CLEAR outer lens. Includes M6FC chrome flange.
NOTE:
One (1)curb side low near rear
One (1) rear high curb side
One (1) rear low street side in taillight housing
One 1 street side low mid-ship
14.07 1 Whelen M7 series Linear Super-LED lighthead with internal flasher, RED LED's with clear
outer lens. model M7RC Includes chrome flange M7FC.
NOTE:
One 1 street side fender
14.08 1 Whelen M7 series Linear Super-LED lighthead with internal flasher, BLUE LED's with clear
outer lens. model M76C Includes chrome flange M7FC.
NOTE:
One 1 curb side fender
14.09 4 Whelen M9 series Linear Super-LED lighthead with internal flasher, RED LED's with CLEAR
outer lens. Includes chrome flange.
NOTE:
One (1)front street side
One (1)curb side high near front
One (1)curb side high near rear
One(1)street side high mid-ship
Page 16 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800-558.5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qty
14.10 4 Whelen M9 series Linear Super-LED lighthead with internal flasher, BLUE LED's with CLEAR
outer lens. Includes chrome flange.
NOTE:
One (1)front curb side
One (1)curb side high mid-ship
One (1)street side high near front
One 1 street side high near rear
15.00 AUDIO/VIDEO:
15.01 2 LG 24"720p Smart TV 24LM53OS-PU with wall mount bracket.
NOTE:
Locate: Rear wall, on either side of rear door.
15.02 4 Samsung 43"TU7000 Titan Gray Crystal UHD 4K Smart HDTV- UN43TU7000FXZA with wall
mount bracket. Features:
• Resolution 3840 x 2160
• (2) HDMI, (1) USB
• Sound Output(2) Speakers
• DTV Tuner/ATSC/Clear QAM
•Wi-Fi Ready, Smart TV
• Dimensions: 37.9"x 22"x 2.4" (W x H x D), weight 17.9 Ibs
NOTE:
TV's mounted in front conference room, front wall
15.03 1 SunBriteTV 43" Black Signature Series Outdoor TV, Partial Sun, 2160p, 4K Ultra HD LED TV
(Model SB-S-43-4K-SL) and SunBrite TV All-Weather Detachable Soundbar Speaker(SB-
SP472).
•4K UHD high-brightness (700NIT)commercial-grade anti-glare screen
• OptiViewTmTechnology
• Built-in HDBaseT Receiver
• Outdoor Safe
• Extreme Temperature Functionality
15.04 1 Weatherproof single door exterior work station and TV/monitor compartment. Constructed from
0.125"aluminum with all welded seams and hinged at the top.
Includes:
• Internal flip down work surface
• LED strip light(illuminates when door is opened)
• Gas charged lift support and locking latch
NOTE:
Locate: Exterior curb side front slide out
Compartment to have equipment installed from items as noted through this specification
One(1)43"TV
One (1)Cat6 jack
Two(2)GFCI outlets
Two(2) 12Vdc USB charging outlets
One (1) HDMI jack for drone
One (1) Extron 3"control pad
Two (2) Radio prewires
One (1) Pas stem
15.05 2 Middle Atlantic rack mount shelf for DSS receivers, DVR's and other devices.
Page 17 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986
L 17 V�� Fax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
Item Qty
15.06 1 Five(5) IP Perimeter Cameras.AXIS P1224-E (or current model) Miniature Network Camera.
HDTV 720p resolution
IP66 weather rated
Wide angle 145'field of view
Power over Ethernet
• 1 -rear view
• 1 -front view
• 1 -left side view
• 1 -right side view
• 1 —above side entry door view
Includes AXIS T8705 Video Decoder
• Easily Display Video from IP Cameras
• Supports 1080p Resolution @ 30 fps
• Supports Multiple Frame Rates
15.07 5 SD Memory Card for IP camera. The SD card shall record perimeter camera allowing it to be
downloaded and viewable via an IP address.
15.08 1 JACK@ model OA8500 Digital HDTV Antenna+ Mount with SureLockTm DTV Signal Meter. No
crank u , built in Amplifier and 360' rotation for improved reception.
15.09 1 Extron DXP 88HD 4K PLUS 8X8 HDMI Matrix Switcher. 60-1495-21
NOTE:
INPUTS:
Two (2) Mast cameras
One (1) Share link pro500
One (1) HDMI, Exterior(for Drone)
One (1) Exterior perimeter cameras
One (1) Exterior TV compartment workstation
Two (2) Front conference room table base
OUTPUTS:
Four(4)43"Tv's
Two(2)24"Tv's
One 1 43" Exterior Tv
15.10 3 Extron MKP 2000 X-Y Remote Control Panel for Extron Matrix Switchers
• Compatible with most Extron RS-232 and Ethernet-enabled Matrix Switchers
• 10-key numeric keypad
•Virtual 1/0 grouping
• RS-232 pass-through port
• Unlimited control points
NOTE:
Locations: One (1) panel in front area, one(1) panel in rear area, one (1) panel in exterior TV
box.
15.11 1 Extron ShareLink Pro 500 Series Wireless Collaboration Gateway
Key Features
•Wirelessly share content from personal mobile devices
• Supports Microsoft Windows@ and OS X@ computers as well as Apple®and Android TM
smartphones and tablets
• Integrated dual band wireless access point at 2.4 GHz or 5 GHz
• Provides full screen mirroring for Apple iOS devices1
• Dedicated mobile app, MirrorOp@ for Extron ShareLink TM, for reliable iOS and Android
content sharing
Page 18 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
1
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800-558.5986
L 0 Fax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qt
15.12 3 HDMI input jack, wall plate and cable.
NOTE:
Location:
Two(2) Front conference room table base
One (1) Exterior TV compartment
One (1) Exterior TV Compartment(Drone)
All cable to be Cat6
15.13 HDMI connection cables, as required.
15.14 1 Bogen TPU-15(or current model) paging amplifier with two(2) Whelen SA315P (or current
model) s eakers.
15.15 1 Audio Technica wireless microphone system interfaced to Bogen paging amplifier.
NOTE:
Locate: Exterior curb side TV compartment
15.16 1 HE Series 12 position Passive Combiner.
NOTE:
Sends the Over-the-Air antenna feed to all televisions.
15.17 All RF cable for DSS antenna systems(when specified) shall be Belden#9116 series 6
broadband coaxial cable. All other video cabling shall be Belden#1505A RG-6/U precision
video cable.
16.00 MAST AND MAST MOUNTED EQUIPMENT:
16.01 1 Fireco 2300 series CX.4003N heavy-duty non-locking telescoping pneumatic mast.
Mast features:
• 187 lb. max top load capacity
• 38' 9" extended height
•6' 9" nested height
Includes:
• KEY-WAY breakaway nylon key prevents tower rotation. Easily replaceable.
•Air safety valve for over pressure release and condensation drainage.
•Water drainage holes to avoid freezing at low temperatures.
• Interlock to prevent vehicle from being driven with mast raised.
• Fireco tower does not require routine lubrication.
• Mast cap covers the top of all tower sections when the tower is in the retracted position
keeping dirt and moisture out of the tower when stowed.
16.02 1 Gast 3/4-hp compressor with remote mount 7 gallon air tank.
16.03 1 Custom fabricated 0.125"aluminum Nycoil cylinder painted to match body color.
16.04 1 Custom fabricated bracket on mast to mount two individual camera systems.
NOTE:
Nycoil to contain
Four(4) Cat6 cables-Two(2)for mast camera-One(1) Spare, One (1)for customer supplied
positioner
Two(2) Power cables, One (1) look up light, One (1) Spare
One (1) LMR 240 for panel antenna
16.05 1 Mast lookup light mounted on mast.
16.06 1 Weatherproof mast up/down control switch on exterior of vehicle.
Page 19 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558-5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Qt
16.07 2 AXIS Q6155-E PTZ Dome Network Camera with Lightfinder technology.
• HDTV 1080p and 30x optical zoom
•Axis Sharpdome technology with Speed Dry
• Lightfinder technology performs in low lighting conditions, extremely sensitive to low light
• Built-in laser that provides instant focus in challenging lighting conditions and in complete
darkness
16.08 2 Axis T8705 Video Decoder
• Enables digital monitors to connect to and display live video from Axis network cameras
• HDTV 1080p HDMI video decoder
• Se uence and Multiview(up to 16 cameras
16.09 2 SD Memory Card for IP camera. The SD card shall record mast camera allowing it to be
downloaded and viewable via an IP address.
16.10 1 LMR240 cable runs from electronics rack to mast topper. Includes NMO base termination on
mast topper and extra slack at electronics rack.
16.11 1 Install customers supplied link align 360RPT positioner. Includes install of customer supplied
antenna
17.00 RADIOS:
17.01 Primary 12Vdc power leads for communications radios shall be minimum 2-gauge copper
stranded wire with soldered crimp-on end connectors (gauge based on radio requirements).
Cables shall be enclosed in convoluted tubing and function identified with colored shrink-wrap.
Power to radios shall be controlled by a continuous-duty switch actuated by the auxiliary
battery disconnect switch.
17.02 12 Prewire and make installation provisions for communications radio. Installation includes:
• NMO-style base on the roof or antenna raceway, as applicable.
• LMR195 antenna cable routed to radio transceiver location in Carlon Carflex ENT conduit.
• 12Vdc power routed to radio transceiver location.
NOTE:
Customer supplied radios and locations:
Customer provide-Make/Model, Freq/Power Out/Trunk or Dash Mounted
Two (2) Radio prewires in-between rear workstations (Qty.8)
Four(4) Radio prewires under front conference room flip down seats.
-Two 2 Street side slide out, Two 2 Curb side slide out
17.03 13 Magnetic radio microphone adapter/clip for mobile two way radios.
Includes:
• Magnetic base
• Microphone adapter
• Mounting hardware
Magnetic Mic Clip by Innovative Products for Motorola radio mic. Item#MMBP
17.04 Install hinged panels under countertops to conceal radio transceivers where applicable.
17.05 1 Fabricate and install 3"x 3" square aluminum tubing antenna raceway on the roof of the
vehicle. Antenna raceway will penetrate the roof on each side of the truck at radio box
locations. Includes:
• 3" high x 3" long aluminum access cover at each antenna base location on the side of the
tubing for access to antenna base and coax cable.
•Access covers with watertight gasket and attached with four(4) stainless steel machine
screws. Raceway tube to have nut-serts installed for access cover attachment.
• Carlon Carflex ENT conduit routed from antenna raceway penetration location to radio
transceiver locations.
Page 20 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558.5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
Item oty
17.06 2 Prewire and make installation provisions for customer supplied radio charger
NOTE:
Locate: Street side at swat operator area
18.00 COMPUTER NETWORK AND EQUIPMENT:
18.01 14 RJ-45 Cat6 computer network jack with Cat6 cable routed through Carton Flex-Plus ENT
conduit or raceway(as applicable).
NOTE:
Locate:
Two(2) in Front room conference table base
Two (2) Front street side slide out, flip down seat base
Two (2) Front curb side slid out, flip down seat base
One (1) swat operator desk area
One(1)at Each rear workstation#3 48(Qty.6)
One(1)at Exterior workstation
18.02 1 Leviton 69270-U24 24-port Cat6 rack mount patch panel.
18.03 Certified 18"Cat6 patch cord. As Required.
18.04 Certified 36"Cat6 patch cord. As Required.
18.05 1 Cable Certification Report confirming that network wiring complies with Cat6 specifications.
18.06 1 Install customer supplied Ubiquiti switch
18.07 1 Prep for customer supplied exterior wireless access point
18.08 14 USB 2.0 jack with cable and wall plate
NOTE:
USB jack from raceway to connect to back of each computer monitor.
Locate:
Two(2) Each at Workstations#3 through#8 and Two 2 at swat operator
18.09 1 HP Color LaserJet Pro Multi-Function Printer(MFP) M479FDW
Product features:
• Black/white or color print, copy, scan, and fax capable
• 1 Hi-Speed USB 2.0; 1 host USB at rear side;Gigabit Ethernet 10/100/1000BASE-T network;
802.3az(EEE) 802.11b/g/n/2.4/5 GHZ Wi-Fi radio
• Dimensions W X D X H 16.8 x 25.7 x 16.3 in; 51.6 Lbs.
18.10 14 Dell 22", P2219H computer monitor
Connectivity:
• One (1) HDMI Port
• One (1) DisplayPort
• One(1)VGA Connector
• One(1) USB Upstream Port
• Four(4) USB Downstream Ports
Cables Included:
• One (1) of each, Power Cable, DisplayPort Cable, USB 3.0 Upstream Cable
NOTE:
Locate:
Two(2) Street side swat operator
Two 2 Each at Workstations#348 (Qty. 12
18.11 14 Custom powder coated aluminum mount for monitor.
NOTE: Angle mount for upper stacked monitor at swat operator
Page 21 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800-558-5986
L 17 Fax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
Item Qty
18.12 1 Prewire and make installation provisions for customer supplied wireless router with antennas.
Note.Roof mounted antennas, service contract, activation and configuration not included.
19.00 MISCELLANEOUS ELECTRONICS:
19.01 1 Middle Atlantic Products, Inc. MRK-4026 forty-space 19"wide x 26.5"depth (24" useable
depth)open framed electronics equipment rack with caster base. Rack can easily slide out
from its fixed position to allow side access to rack equipment.
NOTE:
Rack to be accessible from both sides.Accesses will be covered with dry erase marker boards.
19.02 1 Middle Atlantic VFD-40 Vented front door with Thumb Latch (No Key Lock).
19.03 1 Middle Atlantic MW-4QFT-FC top fan panel, with four(4) 50 cfm ventilation fans, QFAN.
19.04 2 Middle Atlantic PD-815SC-NS 15 amp power strip with eight(8)outlets. Includes PB-XS rack
mountin bracket.
19.05 2 Cast Products EB00013-1 (or current model)cast aluminum box with key lock. The rear of the
box will be removed to allow cables to be passed into the vehicle.
NOTE:
Locate:
One (1) Street side behind electronics rack
One(1) Rear, street side slide out, under workstation#3
19.06 2 Shroud with weatherproof pass-through hatch installed in the door of the input box.
19.07 2 Exterior input box door painted to match body.
20.00 EXTERIOR STORAGE COMPARTMENTS:
20.01 1 Single door underbody storage compartment with approximate interior dimensions 21" high x
up to 28"wide x 25"deep constructed from 0.125"aluminum with all welded seams.
NOTE:
Slide out pump
20.02 3 Single door underbody storage compartment with approximate interior dimensions up to 21"
high x up to 58"wide x 25 deep constructed from 0.125"aluminum with all welded seams.
NOTE:
Locate:
One(1) Street side forward of rear wheels
One(1) Street side aft of rear wheels, shared storage with mast pump
One 1 Curb side aft of rear wheels.
20.03 1 Double door underbody storage compartment with approximate interior dimensions up to 21"
high x up to 72"wide x 25"deep constructed from 0.125"aluminum with all welded seams.
NOTE:
Locate: Curb side, for power converters/Chargers. Compartment will be divided for shared
storage.
20.04 1 Weatherproof exterior door to access charging station compartment. Door to be constructed
from 0.125"aluminum with all welded seams and will be hinged at the bottom to provide a
charging shelf when open. Outlets will be accessible when door is opened. Includes locking
latch and LED strip light with automatic switch.
NOTE:
Compartment will contain the following items:
• Four(4)20A-125Vac duplex receptacle with dual USB charging ports
• One(1) GFCI outlet
All items are outlined elsewhere within thesespecifications
Page 22 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800.558-5986
LDVaFax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763-0147
www.ldvusa.com
Item Q
20.05 Compartments listed above will be constructed to the following specifications:
• Sweep out type bottoms with 1/2" drain holes.
•2" box pan doors and door frames fabricated from 0.125"aluminum.
• Door frames shall be riveted to the body and welded to the compartments.
• Compartments shall have an LED light that illuminates when the door is opened.
Compartment doors will be constructed to the following specifications:
• Stainless steel hinges attached with stainless machine screws.
• Slam latches and flush mounted handles.
• 0.100" bright polished aluminum diamond plate on interior surfaces fastened with stainless
hardware.
•All doors shall be sealed with industrial grade neoprene gasket.
21.00 MISCELLANEOUS OTHER:
21.01 2 Girard Nova motorized retractable lateral arm awning. Features:
• Dual-pitch awning with up to three lateral arms for superior strength,
•AC electric powered motor with crank handle/manual override
• Sensor that will retract the awning to prevent damage from the wind
•2-year Limited Warranty
NOTE:
Locate: Curb side
21.02 1 Heavy-duty Quadra Mfg. Bigfoor four point fully automatic one-touch leveling system.
Includes:
• Four(4) QEII-26 jacks with 17,000-lb. capacity each, 26" long with 20"stroke
•Air ride dump valve
• Using intel-touch control for leveling system.
• Safety interlock when jacks are deployed
21.03 1 Set of four Super Dolly Pads high density polypropylene, injection molded yellow colored for
use with leveling system jacks. Pads measure 15"x 17"x 1"thick with a grab strap on one
side.
21.04 3 5 pound dry chemical fire extinguisher.
21.05 3 Battery powered combination Carbon Monoxide and Smoke alarm.
21.06 1 Complete manual set, including the following (as applicable):
•As-built specifications with interior and exterior drawings as used for production of the vehicle.
• Chassis and body owner's manuals.
• 12Vdc and 120Vac legends showing wire gauge, color, number and function.
• 12Vdc high current wiring diagram illustrating the battery system, isolators, power converters,
alternator, disconnect switches and control panels.
• Roof top antenna placement drawing and legend identifying antenna placements and
termination points.
•AudioNideo cabling diagram.
•Warranty and Return Authorization procedures.
• Chassis and generator maintenance and service logs.
• Battery maintenance information.
•All individual component manuals and warranty registration cards as provided by component
manufacturers. Customer is responsible for completing warranty cards and mailing them to
manufacturers.
Page 23 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx
180 Industrial Drive
Burlington,WI 53105 USA
Phone:800-558-5986
LDW� Fax:(262)763-0156
CUSTOM SPECIALTY VEHICLES Direct:+1(262)763.0147
www.ldvusa.com
Item Qt
21.07 1 TRAINING. An LDV representative will provide up to eight (8) hours of orientation on LDV
provided systems, as applicable:
Generator start up and shut down procedure
Leveling system operation
AC and DC electrical systems operation
HVAC systems operation
Mast operation
Audio/Video system operation, does not include programming VCR's, TV's, etc.
Awning operation
21.08 LDV warranty of one (1)year/12,000 miles, whichever comes first, for manufacturer's defects
in materials and workmanship. Refer to LDV warranty statement for details of warranty
covera e.
21.09 Note: Project scope does not include certain tasks or costs that are the responsibility of the
customer unless clearly specified as LDV supplied. These items include, but are not limited to:
• Radio and telephone system programming.
•Activation and service fees for cellular telephones, satellite telephones, satellite TV, satellite
internet access.
• Loading and configuring computer software.
In the event of a discrepancy between the drawing and specification, the specification will
supersede. LDV reserves the right to make substitutions of equal quality and specifications of
those listed in this document.
Some component models change frequently. In the event that a specified component model
becomes unavailable at the time LDV attempts to source it, LDV will provide a replacement
model with equivalent or better features, as agreed upon with the customer.
Page 24 of 24 6/11/2021
Elgin,City of(IL)C45MCC-34901-20 REV1 CC.docx